[Pacemaker] Problem with configuring stonith rcd_serial

Andrew Beekhof andrew at beekhof.net
Wed Oct 27 05:36:28 EDT 2010


On Wed, Oct 27, 2010 at 11:29 AM, Eberhard Kuemmerle
<E.Kuemmerle at fz-juelich.de> wrote:
> You mean the '-' in stonith-P ?

yes

> That is not the problem, see:

Have a look at the line with "Type ID doesn't allow value"

Notice anything about the value?

>
> crm(live)# configure primitive stonithP stonith::rcd_serial params
> hostlist="node1 node2" ttydev="/dev/ttyS0" msduration="2000" dtr|rts="rts"
> element nvpair: Relax-NG validity error : Type ID doesn't allow value
> 'stonithP-instance_attributes-dtr|rts'
> Relax-NG validity error : Element nvpair failed to validate attributes
> element nvpair: Relax-NG validity error : Invalid attribute id for
> element nvpair
> Relax-NG validity error : Extra element nvpair in interleave
> element nvpair: Relax-NG validity error : Element instance_attributes
> failed to validate content
> element cib: Relax-NG validity error : Element cib failed to validate
> content
> crm_verify[1939]: 2010/10/27_11:19:47 ERROR: main: CIB did not pass
> DTD/schema validation
>
>
> On 27 Oct 2010 10:32:39, andrew at beekhof.net wrote:
>> I don't think IDs can contain - characters.
>> Try using underscores as your separator instead.
>>
>> On Tue, Oct 26, 2010 at 9:33 AM, Eberhard Kuemmerle
>> <E.Kuemmerle at fz-juelich.de> wrote:
>>> Hi,
>>>
>>> I try to configure stonith and get an error message that I don't understand:
>>>
>>> crm(live)# configure primitive stonith-P stonith::rcd_serial params
>>> hostlist="node1 node2" ttydev="/dev/ttyS0" msduration="2000"
>>> dtr|rts="rts" ?op monitor interval="60s"
>>> element nvpair: Relax-NG validity error : Type ID doesn't allow value
>>> 'stonith-P-instance_attributes-dtr|rts'
>>> Relax-NG validity error : Element nvpair failed to validate attributes
>>> element nvpair: Relax-NG validity error : Invalid attribute id for
>>> element nvpair
>>> Relax-NG validity error : Extra element nvpair in interleave
>>> element nvpair: Relax-NG validity error : Element instance_attributes
>>> failed to validate content
>>> element cib: Relax-NG validity error : Element cib failed to validate
>>> content
>>> crm_verify[5810]: 2010/10/26_09:20:31 ERROR: main: CIB did not pass
>>> DTD/schema validation
>>> Errors found during check: config not valid
>>>
>>> If I remove the parameter dtr|rts="rts", the error is:
>>>
>>> crm(live)# configure primitive stonith-P stonith::rcd_serial params
>>> hostlist="node1 node2" ttydev="/dev/ttyS0" msduration="2000"
>>> ERROR: stonith-P: required parameter dtr|rts not defined
>>>
>>> so the parameter name dtr|rts seems to be ok.
>>>
>>> I also tried:
>>>
>>> crm(live)# configure primitive stonith-P stonith::rcd_serial params
>>> hostlist="node1 node2" ttydev="/dev/ttyS0" msduration="2000" rts
>>> ERROR: stonith-P: required parameter dtr|rts not defined
>>> ERROR: stonith-P: parameter rts does not exist
>>>
>>> Who knows the solution?
>>>
>>> Best regards,
>>> ?Eberhard
>>>
>>>
>
> ------------------------------------------------------------------------------------------------
> ------------------------------------------------------------------------------------------------
> Forschungszentrum Juelich GmbH
> 52425 Juelich
> Sitz der Gesellschaft: Juelich
> Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
> Vorsitzender des Aufsichtsrats: MinDirig Dr. Karl Eugen Huthmacher
> Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
> Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
> Prof. Dr. Sebastian M. Schmidt
> ------------------------------------------------------------------------------------------------
> ------------------------------------------------------------------------------------------------
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>




More information about the Pacemaker mailing list