[ClusterLabs] Cluster Lab Query: Pacemaker 3.0.3 controld SIGSEGV on repeated resource start-failure → cluster shutdown (not seen on 2.1.6)
S Sathish S
s.s.sathish at ericsson.com
Thu Nov 5 13:54:24 UTC 2026
Thanks for the quick response and for offering to dig into this. Answers to your points below.
The OCF agent and its configuration:
The failing resource is a lightly modified copy of the standard upstream "Dummy" OCF agent (resource-agents Dummy). For reproduction, the key point is that the start action is forced to fail. Below is how start/stop and the action dispatcher look in our agent.
start - deliberately returns a generic error after a fixed sleep (the real systemctl-based start logic is present but sits after the exit, so it is not reached while we are reproducing the failure):
start() {
ocf_log info "Initiating ESAFMA component start"
sleep 20
ocf_log warn "Unable to start ESAFMA component"
exit $OCF_ERR_GENERIC # start always returns 1
# --- normal start logic (not reached in this failure scenario) ---
systemctl start esafma.service
sleep 10
output=$(systemctl is-active esafma.service)
if [ "$output" = "active" ]; then
PID_COUNT=$(systemctl show --property MainPID --value esafma.service)
echo "$PID_COUNT" > /opt/occ/var/pid/esafma.pid
ocf_log info "ESAFMA component started successfully"
return $OCF_SUCCESS
else
ocf_log warn "Unable to start ESAFMA component"
exit $OCF_ERR_GENERIC
fi
}
stop - normal systemctl-based stop:
stop() {
ocf_log info "Initiating ESAFMA component stop"
systemctl stop esafma.service
sleep 10
output=$(systemctl is-active esafma.service)
if [ "$output" != "active" ]; then
rm -f /opt/occ/var/pid/esafma.pid
ocf_log info "ESAFMA component stopped successfully"
return $OCF_SUCCESS
else
ocf_log warn "Unable to stop ESAFMA component"
exit $OCF_ERR_GENERIC
fi
}
monitor - normal pidfile/systemctl-based check (reports running / not-running / error). It is not really relevant to this reproduction because start never succeeds, so the resource is never up:
monitor() {
PIDFILE="/opt/occ/var/pid/esafma.pid"
if [ -n "$PIDFILE" -a -f "$PIDFILE" ]; then
PID=$(cat "$PIDFILE")
if [ -n "$PID" ]; then
timeout 90s ps -f --pid $PID
rc=$?
case $rc in
0) ocf_log info "ESAFMA component is running with $PID number"
return $OCF_SUCCESS ;;
1) ocf_log err "ESAFMA component is not running"
return $OCF_NOT_RUNNING ;;
*) ocf_log warn "System command failed with $rc return code"
return $OCF_ERR_GENERIC ;;
esac
fi
fi
}
action dispatcher:
case $__OCF_ACTION in
meta-data) meta_data; exit $OCF_SUCCESS ;;
start) start ;;
stop) stop ;;
monitor) monitor ;;
validate-all) validate ;;
*) usage; exit $OCF_ERR_UNIMPLEMENTED ;;
esac
The metadata is the stock metadata (start/stop/monitor timeout=20, monitor interval=10).
To reproduce on a stock system you only need to take the upstream agent, make its start action "sleep 20; exit $OCF_ERR_GENERIC" (OCF_ERR_GENERIC=1), install it as an OCF agent (e.g /usr/lib/ocf/resource.d/provider/ESAFMA_RA, class=ocf, provider=provider, type=ESAFMA_RA), and configure the primitive with the operation timeouts/thresholds already shared in the original report. Pacemaker then loops stop -> start -> stop roughly every 30s.
on-fail / failure-handling configuration:
On the unaffected node (Pacemaker 2.1.6) we run exactly the same configuration - on-fail=restart, same timeouts and thresholds - and it works correctly: the resource is marked FAILED and the cluster stays up. Since only the Pacemaker version differs between the two nodes. If there is no fix or alternative available, we will try the on-fail=stop workaround.
Other 3.0.x releases:
We haven't tried other 3.0.x releases yet. We'll try to reproduce on 3.0.1 and let you know.
For reference:
- affected node: Pacemaker 3.0.3-1.el8, corosync 3.1.10, pcs 0.12.3.1
- unaffected node: Pacemaker 2.1.6-1.el8, corosync 3.1.7, pcs 0.10.16
Thanks and Regards,
S Sathish S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/users/attachments/20261105/e9ab2b17/attachment.htm>
More information about the Users
mailing list