[ClusterLabs] Unable to build rpm using make rpm command for pacemaker-2.1.4.

S Sathish S s.s.sathish at ericsson.com
Thu Nov 24 01:32:11 EST 2022


Hi Ken/Klaus/Team,

I have verified https://github.com/ClusterLabs/pacemaker/pull/2949  for build rpm is work as expected.

Thanks for quick support.

Regards,
S Sathish S
-----Original Message-----
From: Ken Gaillot <kgaillot at redhat.com> 
Sent: 22 November 2022 22:52
To: S Sathish S <s.s.sathish at ericsson.com>; Cluster Labs - All topics related to open-source clustering welcomed <users at clusterlabs.org>
Subject: Re: [ClusterLabs] Unable to build rpm using make rpm command for pacemaker-2.1.4.

2.1.5-rc3 is available and worked in my development environment. Let me know if you have any problems.

After your comment here, I tested as far back as 1.1.12 (released in
2014) and couldn't build RPMs from a source distribution, so I'm not sure how long it's been broken. I know it was supposed to work, so it probably did at some point.

On Tue, 2022-11-22 at 12:16 +0000, S Sathish S wrote:
> Hi Ken/Team,
> 
> We have tried on pacemaker 2.1.1 also faced same issue , later we have 
> perform below steps as workaround to build pacemaker rpm as you said 
> it run from a git checkout and build rpm.
> 
> #./autogen.sh
> #./configure/
> #make
> #make dist
> #rpmbuild -v -bb 
> https://protect2.fireeye.com/v1/url?k=31323334-501d5122-313273af-45444
> 5555731-eaff28d0e7dc6695&q=1&e=2ae0ba53-50e0-48cf-aca5-28ec12f969f6&u=
> http%3A%2F%2Fspec.in%2F
> 
> RPM output in below format:
> pacemaker-cluster-libs-2.1.4-1.2.1.4.git.el8.x86_64
> pacemaker-schemas-2.1.4-1.2.1.4.git.el8.noarch
> pacemaker-2.1.4-1.2.1.4.git.el8.x86_64
> pacemaker-libs-2.1.4-1.2.1.4.git.el8.x86_64
> pacemaker-cli-2.1.4-1.2.1.4.git.el8.x86_64
> 
> Please let us know once it is fixed on 2.1.5-rc3 ,we need to build rpm 
> without git checkout method.
> 
> Thanks and Regards,
> S Sathish S
> -----Original Message-----
> From: Ken Gaillot <kgaillot at redhat.com>
> Sent: 21 November 2022 21:52
> To: Cluster Labs - All topics related to open-source clustering 
> welcomed <users at clusterlabs.org>
> Cc: S Sathish S <s.s.sathish at ericsson.com>
> Subject: Re: [ClusterLabs] Unable to build rpm using make rpm command 
> for pacemaker-2.1.4.
> 
> Hi,
> 
> Currently the RPM targets can only be run from a git checkout, not a 
> distribution tarball. It looks like that's a regression introduced in
> 2.1.2 so I'll try to fix it for 2.1.5-rc3 (expected this week).
> 
> On Mon, 2022-11-21 at 13:04 +0000, S Sathish S via Users wrote:
> > Hi Team,
> >  
> > I am getting the below error when executing make rpm command to 
> > build
> > pacemaker-2.1.4 package on linux 8 server.
> >  
> > [root at node1 pacemaker-Pacemaker-2.1.4]# make rpm make  -C rpm  "rpm"
> > make[1]: Entering directory '/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm'
> > cd /root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/..;                                                   \
> > if [ -n "" ]; then                                              \
> >     git commit -m "DO-NOT-PUSH"
> > -a;                                     \
> >     git archive --prefix=pacemaker-DIST/ -o
> > "/root/smf_source/pacemaker-Pacemaker-2.1.4/rpm/../pacemaker-
> > DIST.tar.gz" HEAD^{tree};      \
> >     git reset --mixed
> > HEAD^;                                            \
> >     echo "`date`: Rebuilt /root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/../pacemaker-
> > DIST.tar.gz";                                     \
> > elif [ -f "/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/../pacemaker-DIST.tar.gz" ];
> > then                                             \
> >     echo "`date`: Using existing tarball:
> > /root/smf_source/pacemaker-
> > Pacemaker-2.1.4/rpm/../pacemaker-
> > DIST.tar.gz";                     \
> > else                                                               
> >   
> >    \
> >     git archive --prefix=pacemaker-DIST/ -o
> > "/root/smf_source/pacemaker-Pacemaker-2.1.4/rpm/../pacemaker-
> > DIST.tar.gz" DIST^{tree};      \
> >     echo "`date`: Rebuilt /root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/../pacemaker-
> > DIST.tar.gz";                                     \
> > fi
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > Mon Nov 21 07:42:25 EST 2022: Rebuilt /root/smf_source/pacemaker- 
> > Pacemaker-2.1.4/rpm/../pacemaker-DIST.tar.gz
> > rm -f "/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/SRPMS"/*.src.rpm
> > rm -f "/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/SPECS/pacemaker.spec"
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > fatal: not a git repository (or any of the parent directories):
> > .git
> > /usr/bin/mkdir -p "/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/SPECS"
> > if [ x"`git ls-files -m
> > https://protect2.fireeye.com/v1/url?k=31323334-501d5122-313273af-454
> > 445555731-da62d98365929a68&q=1&e=8617afbf-d9b3-4f10-880c-745c5d63df1
> > 9&u=http%3A%2F%2Fpacemaker.spec.in%2F
> >  2>/dev/null`" != x ];
> > then    \
> >     cat "/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/pacemaker.spec.in";                                     \
> > elif git cat-file -e DIST:rpm/pacemaker.spec.in 2>/dev/null;
> > then               \
> >     git show
> > DIST:rpm/pacemaker.spec.in;                                        
> > \
> > elif git cat-file -e DIST:pacemaker.spec.in 2>/dev/null;
> > then                   \
> >     git show
> > DIST:pacemaker.spec.in;                                            
> > \
> > else                                    
> >                                        \
> >     cat "/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/pacemaker.spec.in";                                     \
> > fi |
> > sed                                                                
> >   
> >       \
> >     -e 's/^\(%global pcmkversion \).*/\12.1.4/'                 \
> >     -e 's/^\(%global specversion \).*/\11/'                     \
> >     -e 's/^\(%global commit
> > \).*/\1DIST/'                               \
> >     -e 's/^\(%global commit_abbrev \).*/\14/'                   \
> >     -e "s/PACKAGE_DATE/$(date +'%a %b %d
> > %Y')/"                         \
> >     -e 's/PACKAGE_VERSION/2.1.4-1/'                     \
> >     > "/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/SPECS/pacemaker.spec"
> > if [ -e "../build.counter" ]; then              \
> >        echo 1 > "../build.counter";    \
> > fi
> > rpmbuild -bs --define "_sourcedir /root/smf_source/pacemaker- 
> > Pacemaker-2.1.4/rpm/.." --define "_topdir
> > /root/smf_source/pacemaker-
> > Pacemaker-2.1.4/rpm" --without doc "/root/smf_source/pacemaker- 
> > Pacemaker-2.1.4/rpm/SPECS/pacemaker.spec"
> > error: File /root/smf_source/pacemaker-Pacemaker-2.1.4/pacemaker-
> > DIST.tar.gz is smaller than 13 bytes
> > Wrote: /root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/SRPMS/pacemaker-2.1.4-1.DIST.git.el8.src.rpm
> > To create custom builds, edit the flags and options in 
> > pacemaker.spec first rpmbuild --define "_sourcedir
> > /root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/.." --define "_topdir /root/smf_source/pacemaker-
> > Pacemaker-
> > 2.1.4/rpm" --without doc --rebuild "/root/smf_source/pacemaker- 
> > Pacemaker-2.1.4/rpm/SRPMS"/*.src.rpm
> > Installing /root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm/SRPMS/pacemaker-2.1.4-1.DIST.git.el8.src.rpm
> > error: File /root/smf_source/pacemaker-Pacemaker-2.1.4/pacemaker-
> > DIST.tar.gz is smaller than 13 bytes
> > Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.fb1j8n
> > + umask 022
> > + cd /root/smf_source/pacemaker-Pacemaker-2.1.4/rpm/BUILD
> > + cd /root/smf_source/pacemaker-Pacemaker-2.1.4/rpm/BUILD
> > + rm -rf pacemaker-DIST
> > + /usr/bin/tar -xof /root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/pacemaker-DIST.tar.gz
> > /usr/bin/tar: This does not look like a tar archive
> >  
> > gzip: stdin: unexpected end of file
> > /usr/bin/tar: Child returned status 1
> > /usr/bin/tar: Error is not recoverable: exiting now
> > error: Bad exit status from /var/tmp/rpm-tmp.fb1j8n (%prep)
> >  
> >  
> > RPM build errors:
> >     File /root/smf_source/pacemaker-Pacemaker-2.1.4/pacemaker-
> > DIST.tar.gz is smaller than 13 bytes
> >     Bad exit status from /var/tmp/rpm-tmp.fb1j8n (%prep)
> > make[1]: *** [Makefile:869: rpm] Error 1
> > make[1]: Leaving directory '/root/smf_source/pacemaker-Pacemaker-
> > 2.1.4/rpm'
> > make: *** [GNUmakefile:54: rpm] Error 2
> >  
> > Below steps followed after downloading pacemaker-2.1.4 package from 
> > Clusterlab and install required dependencies as per documentation.
> >  
> > #./autogen.sh
> > #./configure
> > #make
> > #make rpm
> >  
> > Please help solve the issue.
> >  
> > Thanks and Regards,
> > S Sathish S
> --
> Ken Gaillot <kgaillot at redhat.com>
--
Ken Gaillot <kgaillot at redhat.com>


More information about the Users mailing list