[ClusterLabs] DRBD resource not starting

[Strahil Nikolov]

And how did you define the drbd resource?

Best Regards,
Strahil Nikolov

На 14 август 2020 г. 18:48:32 GMT+03:00, Gerry Kernan <gerry at infinityit.ie> написа:
>Hi
>Im trying to add a drbd resource to pacemaker cluster on centos 7
>
>
>But getting this error on pcs status
>drbd_r0        (ocf::linbit:drbd):      ORPHANED FAILED (blocked)[ vps1
>vps2 ]
>
>
>if I try and the resource from cli I get out out below
>
>[root at VPS1 drbd-utils]# pcs resource debug-start rep-r0
>Operation start for rep-r0:0 (ocf:linbit:drbd) returned: 'unknown
>error' (1)
>>  stdout: drbdsetup - Configure the DRBD kernel module.
>>  stdout:
>>  stdout: USAGE: drbdsetup command {arguments} [options]
>>  stdout:
>>  stdout: Commands:
>>  stdout:     primary - Change the role of a node in a resource to
>primary.
>>  stdout:     secondary - Change the role of a node in a resource to
>secondary.
>>  stdout:     attach - Attach a lower-level device to an existing
>replicated device.
>>  stdout:     disk-options - Change the disk options of an attached
>lower-level device.
>>  stdout:     detach - Detach the lower-level device of a replicated
>device.
>>  stdout:     connect - Attempt to (re)establish a replication link to
>a peer host.
>>  stdout:     new-peer - Make a peer host known to a resource.
>>  stdout:     del-peer - Remove a connection to a peer host.
>>  stdout:     new-path - Add a path (endpoint address pair) where a
>peer host should be
>>  stdout:         reachable.
>>  stdout:     del-path - Remove a path (endpoint address pair) from a
>connection to a peer
>>  stdout:         host.
>>  stdout:     net-options - Change the network options of a
>connection.
>>  stdout:     disconnect - Unconnect from a peer host.
>>  stdout:     resize - Reexamine the lower-level device sizes to
>resize a replicated
>>  stdout:         device.
>>  stdout:     resource-options - Change the resource options of an
>existing resource.
>>  stdout:     peer-device-options - Change peer-device options.
>>  stdout:     new-current-uuid - Generate a new current UUID.
>>  stdout:     invalidate - Replace the local data of a volume with
>that of a peer.
>>  stdout:     invalidate-remote - Replace a peer's data of a volume
>with the local data.
>>  stdout:     pause-sync - Stop resynchronizing between a local and a
>peer device.
>>  stdout:     resume-sync - Allow resynchronization to resume on a
>replicated device.
>>  stdout:     suspend-io - Suspend I/O on a replicated device.
>>  stdout:     resume-io - Resume I/O on a replicated device.
>>  stdout:     outdate - Mark the data on a lower-level device as
>outdated.
>>  stdout:     verify - Verify the data on a lower-level device against
>a peer device.
>>  stdout:     down - Take a resource down.
>>  stdout:     role - Show the current role of a resource.
>>  stdout:     cstate - Show the current state of a connection.
>>  stdout:     dstate - Show the current disk state of a lower-level
>device.
>>  stdout:     show-gi - Show the data generation identifiers for a
>device on a particular
>>  stdout:         connection, with explanations.
>>  stdout:     get-gi - Show the data generation identifiers for a
>device on a particular
>>  stdout:         connection.
>>  stdout:     show - Show the current configuration of a resource, or
>of all resources.
>>  stdout:     status - Show the state of a resource, or of all
>resources.
>>  stdout:     check-resize - Remember the current size of a
>lower-level device.
>>  stdout:     events2 - Show the current state and all state changes
>of a resource, or of
>>  stdout:         all resources.
>>  stdout:     wait-sync-volume - Wait until resync finished on a
>volume.
>>  stdout:     wait-sync-connection - Wait until resync finished on all
>volumes of a
>>  stdout:         connection.
>>  stdout:     wait-sync-resource - Wait until resync finished on all
>volumes.
>>  stdout:     wait-connect-volume - Wait until a device on a peer is
>visible.
>>  stdout:     wait-connect-connection - Wait until all peer volumes of
>connection are
>>  stdout:         visible.
>>  stdout:     wait-connect-resource - Wait until all connections are
>establised.
>>  stdout:     new-resource - Create a new resource.
>>  stdout:     new-minor - Create a new replicated device within a
>resource.
>>  stdout:     del-minor - Remove a replicated device.
>>  stdout:     del-resource - Remove a resource.
>>  stdout:     forget-peer - Completely remove any reference to a
>unconnected peer from
>>  stdout:         meta-data.
>>  stdout:
>>  stdout: Use 'drbdsetup help command' for command-specific help.
>>  stdout:
>>  stdout:
>>  stdout: invalid command
>>  stdout:
>>  stdout:
>>  stdout:
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: line 318: USAGE::
>command not found
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: line 320: Commands::
>command not found
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: line 321: primary:
>command not found
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: line 322: secondary:
>command not found
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: line 323: attach:
>command not found
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: line 324: disk-options:
>command not found
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: line 325: detach:
>command not found
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: eval: line 326: syntax
>error near unexpected token `('
>>  stderr: /usr/lib/ocf/resource.d/linbit/drbd: eval: line 326: `   
>connect - Attempt to (re)establish a replication link to a peer host.'
>>  stderr: new-minor r0 0 0: sysfs node
>'/sys/devices/virtual/block/drbd0' (already? still?) exists
>>  stderr: r0: Failure: (161) Minor or volume exists already (delete it
>first)
>>  stderr: Command 'drbdsetup new-minor r0 0 0' terminated with exit
>code 10
>>  stderr: Aug 14 16:47:38 ERROR: r0: Called drbdadm -c /etc/drbd.conf
>-S new-minor r0
>>  stderr: Aug 14 16:47:38 ERROR: r0: Exit code 10
>>  stderr: Aug 14 16:47:38 ERROR: r0: Command output:
>
>Gerry