[ClusterLabs] How to set up fencing/stonith
Ken Gaillot
kgaillot at redhat.com
Fri May 18 15:29:45 EDT 2018
On Fri, 2018-05-18 at 12:01 -0600, Casey & Gina wrote:
> > > pcmk_host_list="<nodeid>" - not sure about this one - I'm
> > > guessing
> > > this would actually be the same input as the list I was inputting
> > > to
> > > the HOSTLIST parameter with the external/vcenter approach?
> > >
> > > port="<vm_name>" - not sure about this one - with this approach
> > > would
> > > I need to issue the above command once for each node in the
> > > cluster
> > > with the respective hostnames?
> >
> > The above command presumes one fence device per node. I'm guessing
> > the
> > VM names are different from their cluster node names. You could do
> > the
> > same thing with a single device using the pcmk_host_map parameter:
> >
> > pcmk_host_map="node1:vm1;node2:vm2;etc."
>
> Ahh, so it's either port= or pcmk_host_map=? So this should look
> like pcmk_host_map="d-gp2-dbpg0-1:d-gp2-dbpg0-1;..." in my case? How
> then is this different from pcmk_host_list? Or is pcmk_host_list
> supposed to be something else entirely than what I've guessed?
>
> My cluster node names and vm names are identical in all cases.
When the names are the same, pcmk_host_list is sufficient.
pcmk_host_map is the equivalent for when they're different.
> > Is the relevant package installed on all nodes? If so, I'm not sure
> > why
> > it wouldn't return meta-data, maybe check selinux.
>
> No selinux... According to dpkg -S, the file
> /usr/sbin/fence_vmware_soap comes from the fence-agents package,
> which is installed on all nodes, I believe as a dependency of
> pacemaker. On a fresh machine where I install the corosync,
> pacemaker, and pcs packages, the full output of `pcs stonith list` is
> as follows - which gives errors for both fenc_vmware_soap and
> fence_ovh. Perhaps there is a bug in the packaging?
It sounds like it, or perhaps a portability issue in the agent itself.
> fence_alom - Fence agent for Sun ALOM
> fence_amt - Fence agent for AMT
> fence_apc - Fence agent for APC over telnet/ssh
> fence_apc_snmp - Fence agent for APC, Tripplite PDU over SNMP
> fence_bladecenter - Fence agent for IBM BladeCenter
> fence_brocade - Fence agent for HP Brocade over telnet/ssh
> fence_cisco_mds - Fence agent for Cisco MDS
> fence_cisco_ucs - Fence agent for Cisco UCS
> fence_compute - Fence agent for the automatic resurrection of
> OpenStack compute instances
> fence_docker - Fence agent for Docker
> fence_drac - I/O Fencing agent for Dell DRAC IV
> fence_drac5 - Fence agent for Dell DRAC CMC/5
> fence_dummy - Dummy fence agent
> fence_eaton_snmp - Fence agent for Eaton over SNMP
> fence_emerson - Fence agent for Emerson over SNMP
> fence_eps - Fence agent for ePowerSwitch
> fence_hds_cb - Fence agent for Hitachi Compute Blade systems
> fence_hpblade - Fence agent for HP BladeSystem
> fence_ibmblade - Fence agent for IBM BladeCenter over SNMP
> fence_idrac - Fence agent for IPMI
> fence_ifmib - Fence agent for IF MIB
> fence_ilo - Fence agent for HP iLO
> fence_ilo2 - Fence agent for HP iLO
> fence_ilo3 - Fence agent for IPMI
> fence_ilo3_ssh - Fence agent for HP iLO over SSH
> fence_ilo4 - Fence agent for IPMI
> fence_ilo4_ssh - Fence agent for HP iLO over SSH
> fence_ilo_moonshot - Fence agent for HP Moonshot iLO
> fence_ilo_mp - Fence agent for HP iLO MP
> fence_ilo_ssh - Fence agent for HP iLO over SSH
> fence_imm - Fence agent for IPMI
> fence_intelmodular - Fence agent for Intel Modular
> fence_ipdu - Fence agent for iPDU over SNMP
> fence_ipmilan - Fence agent for IPMI
> fence_kdump - Fence agent for use with kdump
> fence_ldom - Fence agent for Sun LDOM
> fence_lpar - Fence agent for IBM LPAR
> fence_mpath - Fence agent for multipath persistent reservation
> fence_netio - I/O Fencing agent for Koukaam NETIO-230B
> Error: no metadata for /usr/sbin/fence_ovh
> fence_pve - Fencing agent for the Proxmox Virtual Environment
> fence_raritan - I/O Fencing agent for Raritan Dominion PX
> fence_rcd_serial - rcd_serial fence agent
> fence_rhevm - Fence agent for RHEV-M REST API
> fence_rsa - Fence agent for IBM RSA
> fence_rsb - I/O Fencing agent for Fujitsu-Siemens RSB
> fence_sanbox2 - Fence agent for QLogic SANBox2 FC switches
> fence_sbd - Fence agent for sbd
> fence_scsi - Fence agent for SCSI persistentl reservation
> fence_tripplite_snmp - Fence agent for APC, Tripplite PDU over SNMP
> fence_vbox - Fence agent for VirtualBox
> fence_virsh - Fence agent for virsh
> fence_vmware - Fence agent for VMWare
> Error: no metadata for /usr/sbin/fence_vmware_soap
> fence_wti - Fence agent for WTI
> fence_xenapi - Fence agent for Citrix XenServer over XenAPI
> fence_zvmip - Fence agent for use with z/VM Virtual Machines
>
> Thank you,
--
Ken Gaillot <kgaillot at redhat.com>
More information about the Users
mailing list