[ClusterLabs] Antw: Re: SLES11SP4 (crmsh-2.1.2+git49.g2e3fa0e-1.32): problems parsing nodes

Ulrich Windl Ulrich.Windl at rz.uni-regensburg.de
Mon Dec 14 08:00:38 UTC 2015


Hi!

An update:
The fix was to delete the nodes and re-create them. CRM shell was happy then,
displaying the node like this:
---
node h04 \
        utilization utl_cpu=200 utl_ram=1200 attributes standby=off
---

But when committing the config I got warnings in syslog like this:
pengine[25263]:    error: crm_int_helper: Characters left over after parsing
'off': 'off'

I feel different parts of the cluster stack have different expectations on the
syntax...

Regards,
Ulrich

>>> Ulrich Windl schrieb am 14.12.2015 um 08:22 in Nachricht <566E6E49.49E :
161 :
60728>:
>>>> Kristoffer Grönlund <kgronlund at suse.com> schrieb am 12.12.2015 um 08:43
in
> Nachricht <87io443ydc.fsf at krigpad.kri.gs>:
> > Ulrich Windl <Ulrich.Windl at rz.uni-regensburg.de> writes:
> > 
> >> Hi!
> >>
> >> "crm configure edit" displays the nodes section in XML like this:
> >>
> >> xml <node id="h04" uname="h04"> \
> >>   <utilization id="h04-utilization"> \
> >>     <nvpair id="h04-utilization-utl_ram" name="utl_ram" value="1200"/> \
> >>     <nvpair id="h04-utilization-utl_cpu" name="utl_cpu" value="200"/> \
> >>   </utilization> \
> >>   <instance_attributes id="nodes-h04"> \
> >>     <nvpair id="nodes-h04-standby" name="standby" value="off"/> \
> >>   </instance_attributes> \
> >> </node>
> >>
> >> In SLES11 SP3 this was not the case...
> >>
> >> The rest of the config is not displayed in XML, just the nodes.
> > 
> > Hi,
> > 
> > This may be caused by an unrelated problem with the configuration. crmsh
> > tries to verify that the CLI syntax truly matches the XML syntax, and
> > will revert to displaying the XML if it thinks the representation
> > doesn't match. It can get confused in some cases.
> > 
> > You might get more information using
> > 
> > crm -dR configure show h04
> 
> Thanks for the hint! Tying it I get some message like these:
> DEBUG: node!=node: number of children differ
> 
> In Detail it seems the new software wants to see <instance_attributes> 
> inside <node>, and does not want to see:
>       <nvpair id="h04-utilization-attributes" name="attributes"></nvpair>
>       <nvpair id="h04-utilization-standby" name="standby" 
>value="off"></nvpair>
> 
> So is it too much to expect for an upgrade to fix the XML syntax it it 
> changed?
> (The output of "cibadmin -Q" does not indicate the XML schema being used)
> 
> > 
> > In general, for problems upgrading from SLES11SP3 to SLES11SP4 I would
> > recommend filing issues with SUSE, not upstream.
> 
> It's not "filing an issue"; it's "make people aware" before they run into 
> the same problems that I did.
> 
> Regards,
> Ulrich
> 
> 







More information about the Users mailing list