[Pacemaker] IPv6addr resource error messages on startup

Dusty Mabe dustymabe at yahoo.com
Fri Aug 13 09:09:09 EDT 2010


Dejan,

You narrowed down the problem perfectly. My interface had ipv6 addresses but they were the auto-configured addresses with scope of link. I reconfigured it with a globally scoped address and starting the resource works fine now.

I really appreciate your input and thank you again!

Dusty Mabe





--- On Fri, 8/13/10, Dejan Muhamedagic <dejanmm at fastmail.fm> wrote:

> From: Dejan Muhamedagic <dejanmm at fastmail.fm>
> Subject: Re: [Pacemaker] IPv6addr resource error messages on startup
> To: "The Pacemaker cluster resource manager" <pacemaker at oss.clusterlabs.org>
> Date: Friday, August 13, 2010, 5:22 AM
> Hi,
> 
> On Thu, Aug 12, 2010 at 01:50:26PM -0700, Dusty Mabe
> wrote:
> > Hi,
> > 
> > I captured the output from var log messages while
> grepping for
> > IPv6addr. The output was captured during an execution
> of crm
> > resource start myIPv6addr. The significant messages
> seem to be:
> > 
> > 
> > Aug 12 16:01:18 hasync-1b crmd: [5754]: info:
> te_rsc_command: Initiating action 18: start
> myIPv6addr_start_0 on hasync-1a
> > Aug 12 16:01:19 hasync-1b crmd: [5754]: WARN:
> status_from_rc: Action 18 (myIPv6addr_start_0) on hasync-1a
> failed (target: 0 vs. rc: 1): Error
> > 
> > and 
> > 
> > Aug 12 16:01:19 hasync-1b pengine: [5952]: WARN:
> unpack_rsc_op: Processing failed op myIPv6addr_start_0 on
> hasync-1a: unknown error (1)
> 
> Nope, these just parrot what you saw in the crm_mon output.
> They
> are obviously not coming from either lrmd or IPv6addr.
> 
> > Nevertheless, I have copied all of the output here for
> completeness:
> [...]
> > Aug 12 16:01:21 hasync-1b lrmd: [5751]: info:
> rsc:myIPv6addr:297: start
> > Aug 12 16:01:21 hasync-1b IPv6addr: [22318]: ERROR: no
> valid mecahnisms
> 
> Looking at the code, apparently this means that IPv6addr
> cannot
> find the interface which would match the parameters. Are
> you sure
> that your IPv6addr config is OK? Can you show us your
> interfaces.
> 
> Thanks,
> 
> Dejan
> 
> > 
> > 
> > 
> > 
> > --- On Thu, 8/12/10, Dejan Muhamedagic <dejanmm at fastmail.fm>
> wrote:
> > 
> > > From: Dejan Muhamedagic <dejanmm at fastmail.fm>
> > > Subject: Re: [Pacemaker] IPv6addr resource error
> messages on startup
> > > To: "The Pacemaker cluster resource manager"
> <pacemaker at oss.clusterlabs.org>
> > > Date: Thursday, August 12, 2010, 3:33 PM
> > > Hi,
> > > 
> > > On Thu, Aug 12, 2010 at 11:17:50AM -0700, Dusty
> Mabe
> > > wrote:
> > > > Hi,
> > > > 
> > > > I am having a problem trying to get
> > > ocf::heartbeat:IPv6addr to work with pacemaker. I
> keep
> > > getting the following message 
> > > > 
> > > > WARN: unpack_rsc_op: Processing failed op
> > > myIPv6addr_start_0 on hasync-1a: unknown error
> (1)
> > > 
> > > It could be anything. Did you check for error
> messages in
> > > the
> > > logs? Look for those coming from IPv6addr and
> lrmd.
> > > 
> > > Thanks,
> > > 
> > > Dejan
> > > 
> > > > My configuration for the resource is as
> follows:
> > > > 
> > > > primitive myIPv6addr ocf:heartbeat:IPv6addr
> \
> > > >     params ipv6addr="1234:5678::9999"
> > > cidr_netmask="64" nic="bond0.3" \
> > > >     op monitor interval="30s"
> > > > 
> > > > I have configured an IPaddr2 resource
> successfully but
> > > am not having luck with the IPv6addr resource.
> Have you guys
> > > seen this before?
> > > > 
> > > > I am on pacemaker 1.0.8, heartbeat 3.0.3,
> > > resource-agents 1.0.3, and cluster-glue 1.0.5.
> > > > 
> > > > 
> > > > 
> > > > Thanks for any help!
> > > > 
> > > > Dusty
> > > > 
> > > > 
> > > > 
> > > >       
> > > > 
> > > >
> _______________________________________________
> > > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > > 
> > > > Project Home: http://www.clusterlabs.org
> > > > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > > Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > > 
> > > _______________________________________________
> > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > 
> > > Project Home: http://www.clusterlabs.org
> > > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > > 
> > 
> > 
> >       
> > 
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > 
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> 
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> 


      




More information about the Pacemaker mailing list