[Pacemaker] can not handle the failcount for clone resource usingcrm tool

[Junko IKEDA]

Sorry,
There were some wrong explanations.

> (4) Now, the failconts for dummy:1 are;
> 	dl380g5c = 1
> 	dl380g5d = 1

(4) Now, the failconts for dummy:1 are;
	dl380g5b = 1
 	dl380g5c = 1


> After set value "0",
> The failcount was deleted not only for dl380g5c but also dl380g5d.

After set value "0",
The failcount was deleted not only for dl380g5c but also dl380g5b.


Thanks,
Junko

> -----Original Message-----
> From: Junko IKEDA [mailto:ikedaj at intellilink.co.jp]
> Sent: Thursday, May 21, 2009 6:33 PM
> To: pacemaker at clusterlabs.org
> Subject: [Pacemaker] can not handle the failcount for clone resource
usingcrm
> tool
> 
> Hi,
> 
> I have 4 nodes (dl380g5a, dl380g5b, dl380g5c, dl380g5d),
> and run 1 clone resource with the following configuration.
> 	clone_max"="2"
> 	clone_node_max"="1"
> 
> (1) Initial state
> 	dummy:0	dl380g5a
> 	dummy:1	dl380g5b
> 
> (2) dummy:1 break down, and move to dl380g5c
> 	dummy:0	dl380g5a
> 	dummy:1	dl380g5c
> 
> (3) dummy:1 break down again, move to dl380g5d
> 	dummy:0	dl380g5a
> 	dummy:1	dl380g5d
> 
> (4) Now, the failconts for dummy:1 are;
> 	dl380g5c = 1
> 	dl380g5d = 1
> 
> I tried to delete the failcount using crm.
> But it seems that delete switch for clone resource doesn't work.
> 
> crm(live)resource# failcount dummy:1 show dl380g5c
> scope=status  name=fail-count-dummy:1 value=1
> crm(live)resource# failcount dummy:1 delete dl380g5c
> crm(live)resource# failcount dummy:1 show dl380g5c
> scope=status  name=fail-count-dummy:1 value=1
> 
> set value "0" worked.
> crm(live)resource# failcount dummy:1 set dl380g5c 0
> crm(live)resource# failcount dummy:1 show dl380g5c
> scope=status  name=fail-count-dummy:1 value=0
> 
> Is this case only in the clone resrouce?
> 
> And anothre thing.
> After set value "0",
> The failcount was deleted not only for dl380g5c but also dl380g5d.
> I expected that "failcount <rsc> show _<node>_" could specify one node.
> Is there any wrong configurations?
> 
> See also attatched hb_report.
> 
> Best Regards,
> Junko Ikeda
> 
> NTT DATA INTELLILINK CORPORATION

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: crm_mon.txt
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20090521/6698874e/attachment-0003.txt>