<div>Hi Everyone.<br></div><div><br></div><div>We've setup fencing with our ilo/idrac interfaces and things generally work well but during some of our failover scenario testing we ran into issues when we "failed' the switches in which those ilo/idrac interfaces were connected.  The issue was that resources were migrated away from any node with an offline fencing device.  I can see how that is desirable, but in our case this is essentially a single point of failure.  How are others managing this?  <br></div><div><br></div><div>In one of our sites we have "smart" APC power strips so we can setup multiple fencing devices, but in another site we do not.  I tried increasing the timeout= value on the fencing devices but that did not seem to work.<br></div><div><br></div><div>Thanks,<br></div><div>Kyle<br></div>