<div dir="ltr">Hi,<br><br>This is my setup:<br><br>1. I have Two vMware-ESXI hosts with one virtual machine (RHEL 7.4) on each.<br>2. On my physical machine, I have four vmnic --> vmnic 0,1 for uplink going to switchA and switchB --> vmnic 2,3 for heartbeat corosync traffic (direct connect to other ESXI host)<br>3. I plan on clustering my two virtual machines via corosync and create a virtual-IP via pacemaker. <br>4. I plan on using the uplink interface for data and totem interface for corosync packets(heartbeat messages).<br>5. These two virtual machines doesnt need for a shared storage, or a shared LUN because the application is, by nature, a standalone application that doesnt need to have a centralized location as it does not store any data that needs to be synchronized between two servers.<br>6. I have a PC that only needs to contact the Virtual IP of the rhel virtual servers.<br>7. Seamless failover from primary to secondary is not required. <div>8. Active/Passive setup<br><br><br>Given the setup above, <br>1. Is there any drawbacks?</div><div>2. Do I need fencing? Can you explain me by giving a scenario on the above setup? What instances will occur if I didnt put a fence device?<br>3. If I need a fence device? what fence device you recommend? SAN, vmWare, or PDU?<br><br><br>Thanks,<br><br>imnotarobot<br><br></div></div>