[ClusterLabs] 答复: 答复: How to configure to make each slave resource has one VIP

[范国腾]

Hello,

If all of the slave nodes crash, all of the slave vips could not work. 

Do we have any way to make all of the slave VIPs binds to the master node if there is no slave nodes in the system?

the user client will not know the system has problem in this way.

Thanks

-----邮件原件-----
发件人: Users [mailto:users-bounces at clusterlabs.org] 代表 Tomas Jelinek
发送时间: 2018年2月23日 17:37
收件人: users at clusterlabs.org
主题: Re: [ClusterLabs] 答复: How to configure to make each slave resource has one VIP

Dne 23.2.2018 v 10:16 范国腾 napsal(a):
> Tomas,
> 
> Thank you very much. I do the change according to your suggestion and it works.
> 
> There is a question: If there are too much nodes (e.g.  total 10 slave nodes ), I need run "pcs constraint colocation add pgsql-slave-ipx with pgsql-slave-ipy -INFINITY" many times. Is there a simple command to do this?

I think colocation set does the trick:
pcs constraint colocation set pgsql-slave-ip1 pgsql-slave-ip2
pgsql-slave-ip3 setoptions score=-INFINITY You may specify as many resources as you need in this command.

Tomas

> 
> Master/Slave Set: pgsql-ha [pgsqld]
>       Masters: [ node1 ]
>       Slaves: [ node2 node3 ]
>   pgsql-master-ip        (ocf::heartbeat:IPaddr2):       Started node1
>   pgsql-slave-ip1        (ocf::heartbeat:IPaddr2):       Started node3
>   pgsql-slave-ip2        (ocf::heartbeat:IPaddr2):       Started node2
> 
> Thanks
> Steven
> 
> -----邮件原件-----
> 发件人: Users [mailto:users-bounces at clusterlabs.org] 代表 Tomas Jelinek
> 发送时间: 2018年2月23日 17:02
> 收件人: users at clusterlabs.org
> 主题: Re: [ClusterLabs] How to configure to make each slave resource has 
> one VIP
> 
> Dne 23.2.2018 v 08:17 范国腾 napsal(a):
>> Hi,
>>
>> Our system manages the database (one master and multiple slave). We 
>> use one VIP for multiple Slave resources firstly.
>>
>> Now I want to change the configuration that each slave resource has a 
>> separate VIP. For example, I have 3 slave nodes and my VIP group has 
>> 2 vip; The 2 vips binds to node1 and node2 now; When the node2 fails, 
>> the vip could move to the node3.
>>
>>
>> I use the following command to add the VIP
>>
>> /      pcs resource group add pgsql-slave-group pgsql-slave-ip1 
>> pgsql-slave-ip2/
>>
>> /      pcs constraint colocation add pgsql-slave-group with slave 
>> pgsql-ha INFINITY/
>>
>> But now the two VIPs are the same nodes:
>>
>> /Master/Slave Set: pgsql-ha [pgsqld]/
>>
>> /     Masters: [ node1 ]/
>>
>> /     Slaves: [ node2 node3 ]/
>>
>> /pgsql-master-ip        (ocf::heartbeat:IPaddr2):       Started 
>> node1/
>>
>> /Resource Group: pgsql-slave-group/
>>
>> */     pgsql-slave-ip1    (ocf::heartbeat:IPaddr2):       Started
>> node2/*
>>
>> */     pgsql-slave-ip2    (ocf::heartbeat:IPaddr2):       Started
>> node2/*
>>
>> Could anyone tell how to configure to make each slave node has a VIP?
> 
> Resources in a group always run on the same node. You want the ip resources to run on different nodes so you cannot put them into a group.
> 
> This will take the resources out of the group:
> pcs resource ungroup pgsql-slave-group
> 
> Then you can set colocation constraints for them:
> pcs constraint colocation add pgsql-slave-ip1 with slave pgsql-ha pcs 
> constraint colocation add pgsql-slave-ip2 with slave pgsql-ha
> 
> You may also need to tell pacemaker not to put both ips on the same node:
> pcs constraint colocation add pgsql-slave-ip1 with pgsql-slave-ip2 
> -INFINITY
> 
> 
> Regards,
> Tomas
> 
>>
>> Thanks
>>
>>
>>
>> _______________________________________________
>> Users mailing list: Users at clusterlabs.org 
>> https://lists.clusterlabs.org/mailman/listinfo/users
>>
>> Project Home: http://www.clusterlabs.org Getting started:
>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
> _______________________________________________
> Users mailing list: Users at clusterlabs.org 
> https://lists.clusterlabs.org/mailman/listinfo/users
> 
> Project Home: http://www.clusterlabs.org Getting started: 
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
> _______________________________________________
> Users mailing list: Users at clusterlabs.org 
> https://lists.clusterlabs.org/mailman/listinfo/users
> 
> Project Home: http://www.clusterlabs.org Getting started: 
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
> 
_______________________________________________
Users mailing list: Users at clusterlabs.org https://lists.clusterlabs.org/mailman/listinfo/users

Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org