[ClusterLabs] IP clone issue

emmanuel segura emi2fast at gmail.com
Tue Sep 5 13:54:17 UTC 2017


I never tried to set an virtual ip in one interfaces without ip, because
the vip is a secondary ip that switch between nodes, not primary ip

2017-09-05 15:41 GMT+02:00 Octavian Ciobanu <coctavian1979 at gmail.com>:

> Hello all,
>
> I've encountered an issue with IP cloning.
>
> Based the "Pacemaker 1.1 Clusters from Scratch" I've configured a test
> configuration with 2 nodes based on CentOS 7.3. The nodes have 2 Ethernet
> cards one for cluster communication with private IP network and second for
> public access to services. The public Ethernet has no IP assigned at boot.
>
> I've created an IP resource with clone using the following command
>
> pcs resource create ClusterIP ocf:heartbeat:IPaddr2 params nic="ens192"
> ip="xxx.yyy.zzz.www" cidr_netmask="24" clusterip_hash="sourceip" op start
> interval="0" timeout="20" op stop interval="0" timeout="20" op monitor
> interval="10" timeout="20" meta resource-stickiness=0 clone meta
> clone-max="2" clone-node-max="2" interleave="true" globally-unique="true"
>
> The xxx.yyy.zzz.www is public IP not a private one.
>
> With the above command the IP clone is created but it is started only on
> one node. This is the output of pcs status command
>
> Clone Set: ClusterIP-clone [ClusterIP] (unique)
>      ClusterIP:0    (ocf::heartbeat:IPaddr2):    Started node02
>      ClusterIP:1    (ocf::heartbeat:IPaddr2):    Started node02
>
> If I modify the clone-node-max to 1 then the resource is started on both
> nodes as seen in this pcs status output:
>
> Clone Set: ClusterIP-clone [ClusterIP] (unique)
>      ClusterIP:0    (ocf::heartbeat:IPaddr2):    Started node02
>      ClusterIP:1    (ocf::heartbeat:IPaddr2):    Started node01
>
> But if one node fails the IP resource is not migrated to active node as is
> said in documentation.
>
> Clone Set: ClusterIP-clone [ClusterIP] (unique)
>      ClusterIP:0    (ocf::heartbeat:IPaddr2):    Started node02
>      ClusterIP:1    (ocf::heartbeat:IPaddr2):    Stopped
>
> When the IP is active on both nodes the services are accessible so there
> is not an issue with the fact that the interface dose not have an IP
> allocated at boot. The gateway is set with another pcs command and it is
> working.
>
> Thank in advance for any info.
>
> Best regards
> Octavian Ciobanu
>
> _______________________________________________
> Users mailing list: Users at clusterlabs.org
> http://lists.clusterlabs.org/mailman/listinfo/users
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>


-- 
  .~.
  /V\
 //  \\
/(   )\
^`~'^
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.clusterlabs.org/pipermail/users/attachments/20170905/75d65aac/attachment-0002.html>


More information about the Users mailing list