[ClusterLabs] Antw: Re: Antw: sbd: Cannot open watchdog device: /dev/watchdog

[Ulrich Windl]

>>> Muhammad Sharfuddin <M.Sharfuddin at nds.com.pk> schrieb am 04.01.2017 um 11:58 in
Nachricht <9ff82caa-d16e-13f4-e514-d356224f82e7 at nds.com.pk>:
> On 01/04/2017 12:09 PM, Ulrich Windl wrote:
>>>>> Muhammad Sharfuddin <M.Sharfuddin at nds.com.pk> schrieb am 03.01.2017 um 17:11 
> in
>> Nachricht <cdaf4125-f2ce-7793-b4a0-44b2fcaf2ccf at nds.com.pk>:
>>> Hello,
>>>
>>> pacemaker does not start on this machine(Fujitsu PRIMERGY RX2540 M1)
>>> with following error in  the logs:
>>>
>>> sbd: [13236]: ERROR: Cannot open watchdog device: /dev/watchdog: No such
>>> file or directory
>>>
>>> System Info:
>>>
>>> sbd-1.2.1-8.7.x86_64  corosync-2.3.3-7.12.x86_64 pacemaker-1.1.12-7.1.x86_64
>>>
>>> lsmod | egrep "(wd|dog)"
>>> iTCO_wdt               13480  0
>>> iTCO_vendor_support    13718  1 iTCO_wdt
>> What were the messages when that modules were loaded?
>>
>> [...]
> 
> kernel: [44884.038881] iTCO_vendor_support: vendor-support=0
> kernel: [44884.042038] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> kernel: [44884.042101] iTCO_wdt: unable to reset NO_REBOOT flag, device 
> disabled by hardware/BIOS
> 
> what should I check for in firmware ? I have never seen anything in 
> firmware/bios that relates to watchdog.

I don't know for your hardware, but for a HP DL380 iLO is handling the watchdog thing (I think). So maybe look in the corresponding place for your hardware or Google.

> 
>>
>> Ulrich
>>
>>
>>
>> _______________________________________________
>> Users mailing list: Users at clusterlabs.org 
>> http://lists.clusterlabs.org/mailman/listinfo/users 
>>
>> Project Home: http://www.clusterlabs.org 
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf 
>> Bugs: http://bugs.clusterlabs.org 
>>
> 
> 
> _______________________________________________
> Users mailing list: Users at clusterlabs.org 
> http://lists.clusterlabs.org/mailman/listinfo/users 
> 
> Project Home: http://www.clusterlabs.org 
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf 
> Bugs: http://bugs.clusterlabs.org