[ClusterLabs] Corosync do not send traffic

Roberto Munoz Gomez roberto.munoz.gomez at diagroup.com
Wed Mar 30 09:14:02 UTC 2016


Hello,

Due to a change in the switch in one of the datacenters now I have an odd
behaviour in the cluster.

I am using cman with corosync and pacemaker. The versions are:

pacemaker-1.1.10-14.el6_5.3.x86_64
corosync-1.4.1-15.el6_4.1.x86_64
cman-3.0.12.1-49.el6.x86_64

The problem is, when I launch /etc/init.d/pacemaker start and the cman_tool
launch corosync, I don't see any UDP traffic, so the cluster is "broken"

But if I launch manually the same command "corosync -f" I do see udp
traffic and the totem is correctly sent between nodes.

It all began with the change in the switch, but I set the tcpdump in the
hosts and I do not see traffic.

I have tried the multicast and unicast configuration, different network,
but all with the same behaviour.

What am I missing?

Best Regards

-- 
*Roberto Muñoz Gómez*

-- 
This e-mail and any attachment are confidential and intended solely for the 
use of the individual to whom it is addressed. If you are not the intended 
recipient, please telephone or email the sender and delete this message and 
any attachment from your system. Unauthorized publication, use, 
dissemination, forwarding, printing or copying of this e-mail and its 
associated attachments is strictly prohibited. 
http://disclaimer.diacorporate.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/users/attachments/20160330/31034438/attachment-0003.html>


More information about the Users mailing list