[ClusterLabs] Make sure either 0 or all resources in a group are running

Sam Gardner SGardner at trustwave.com
Mon Mar 28 21:51:39 UTC 2016


Unstandby-ing a node automatically at some point after a failure on
certain resources actually fits our use cases well, but the problem is
that the automatic unstandby does not put DRBD into secondary mode once it
occurs.

A manual pcs cluster standby $(uname -n) and pcs cluster unstandby $(uname
-n) does restart the state of the node properly, however.

--
Sam Gardner
Trustwave | SMART SECURITY ON DEMAND







On 3/28/16, 4:31 PM, "Sam Gardner" <SGardner at trustwave.com> wrote:

>'on-fail=standby' works well, however, setting a failure-timeout appears
>to automatically bring the node out of standby after it expires.
>
>--
>Sam Gardner
>Trustwave | SMART SECURITY ON DEMAND
>
>
>
>
>
>
>
>On 3/28/16, 3:31 PM, "Ken Gaillot" <kgaillot at redhat.com> wrote:
>
>>On 03/28/2016 02:19 PM, Sam Gardner wrote:
>>> Is there any way to modify the behavior of a resource group N of A, B,
>>>and C so that either A, B, and C are running on the same node, or none
>>>of them are?
>>>
>>> With Pacemaker 1.1.12 and Corosync 1.4.8, if a group N is defined via:
>>> pcs resource group N A B C
>>>
>>> if resource C cannot run, A and B still do.
>>>
>>> --
>>> Sam Gardner
>>> Trustwave | SMART SECURITY ON DEMAND
>>
>>The problem with that model is that none of the resources can be placed
>>or started, because each depends on the others being placed and started
>>already.
>>
>>I can think of two similar alternatives, though they would only work for
>>failures, not for any other reasons C might be stopped:
>>
>>* Use on-fail=standby, so that if any resource fails, all resources are
>>forced off that node. The node must be manually taken out of standby to
>>be used again.
>>
>>* Use rules to say that A cannot run on any node where fail-count-B gt 0
>>or fail-count-C gt 0, and B cannot run on any node where fail-count C gt
>>0. (The group should handle the rest of the dependencies.)
>>
>>
>>_______________________________________________
>>Users mailing list: Users at clusterlabs.org
>>http://scanmail.trustwave.com/?c=4062&d=oJX51sQWSGT59IqY1PSn5CA3HNnKYhWEd
>>x
>>7Y26jDOQ&s=5&u=http%3a%2f%2fclusterlabs%2eorg%2fmailman%2flistinfo%2fuser
>>s
>>
>>Project Home:
>>http://scanmail.trustwave.com/?c=4062&d=oJX51sQWSGT59IqY1PSn5CA3HNnKYhWEd
>>x
>>za2ajHbQ&s=5&u=http%3a%2f%2fwww%2eclusterlabs%2eorg
>>Getting started:
>>http://scanmail.trustwave.com/?c=4062&d=oJX51sQWSGT59IqY1PSn5CA3HNnKYhWEd
>>x
>>-P0PTEOA&s=5&u=http%3a%2f%2fwww%2eclusterlabs%2eorg%2fdoc%2fCluster%5ffro
>>m
>>%5fScratch%2epdf
>>Bugs:
>>http://scanmail.trustwave.com/?c=4062&d=oJX51sQWSGT59IqY1PSn5CA3HNnKYhWEd
>>x
>>3f3qDDbA&s=5&u=http%3a%2f%2fbugs%2eclusterlabs%2eorg
>
>
>________________________________
>
>This transmission may contain information that is privileged,
>confidential, and/or exempt from disclosure under applicable law. If you
>are not the intended recipient, you are hereby notified that any
>disclosure, copying, distribution, or use of the information contained
>herein (including any reliance thereon) is strictly prohibited. If you
>received this transmission in error, please immediately contact the
>sender and destroy the material in its entirety, whether in electronic or
>hard copy format.
>
>_______________________________________________
>Users mailing list: Users at clusterlabs.org
>http://scanmail.trustwave.com/?c=4062&d=rKP51jNpOYvYRlOEnCbJz6vJRyGhyhYdJi
>IcbkHVjA&s=5&u=http%3a%2f%2fclusterlabs%2eorg%2fmailman%2flistinfo%2fusers
>
>Project Home:
>http://scanmail.trustwave.com/?c=4062&d=rKP51jNpOYvYRlOEnCbJz6vJRyGhyhYdJi
>AebEHR2A&s=5&u=http%3a%2f%2fwww%2eclusterlabs%2eorg
>Getting started:
>http://scanmail.trustwave.com/?c=4062&d=rKP51jNpOYvYRlOEnCbJz6vJRyGhyhYdJi
>NLZR3SjQ&s=5&u=http%3a%2f%2fwww%2eclusterlabs%2eorg%2fdoc%2fCluster%5ffrom
>%5fScratch%2epdf
>Bugs:
>http://scanmail.trustwave.com/?c=4062&d=rKP51jNpOYvYRlOEnCbJz6vJRyGhyhYdJi
>Eba0nV2Q&s=5&u=http%3a%2f%2fbugs%2eclusterlabs%2eorg


________________________________

This transmission may contain information that is privileged, confidential, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is strictly prohibited. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format.




More information about the Users mailing list