[ClusterLabs] systemd RA start/stop delays
Dejan Muhamedagic
dejanmm at fastmail.fm
Tue Aug 30 06:18:06 EDT 2016
Hi,
On Thu, Aug 18, 2016 at 09:00:24AM -0500, Ken Gaillot wrote:
> On 08/17/2016 08:17 PM, TEG AMJG wrote:
> > Hi
> >
> > I am having a problem with a simple Active/Passive cluster which
> > consists in the next configuration
> >
> > Cluster Name: kamcluster
> > Corosync Nodes:
> > kam1vs3 kam2vs3
> > Pacemaker Nodes:
> > kam1vs3 kam2vs3
> >
> > Resources:
> > Resource: ClusterIP (class=ocf provider=heartbeat type=IPaddr2)
> > Attributes: ip=10.0.1.206 cidr_netmask=32
> > Operations: start interval=0s timeout=20s (ClusterIP-start-interval-0s)
> > stop interval=0s timeout=20s (ClusterIP-stop-interval-0s)
> > monitor interval=10s (ClusterIP-monitor-interval-10s)
> > Resource: ClusterIP2 (class=ocf provider=heartbeat type=IPaddr2)
> > Attributes: ip=10.0.1.207 cidr_netmask=32
> > Operations: start interval=0s timeout=20s (ClusterIP2-start-interval-0s)
> > stop interval=0s timeout=20s (ClusterIP2-stop-interval-0s)
> > monitor interval=10s (ClusterIP2-monitor-interval-10s)
> > Resource: rtpproxycluster (class=systemd type=rtpproxy)
> > Operations: monitor interval=10s (rtpproxycluster-monitor-interval-10s)
> > stop interval=0s on-fail=block
> > (rtpproxycluster-stop-interval-0s)
> > Resource: kamailioetcfs (class=ocf provider=heartbeat type=Filesystem)
> > Attributes: device=/dev/drbd1 directory=/etc/kamailio fstype=ext4
> > Operations: start interval=0s timeout=60 (kamailioetcfs-start-interval-0s)
> > monitor interval=10s on-fail=fence
> > (kamailioetcfs-monitor-interval-1
> > 0s)
> > stop interval=0s on-fail=fence
> > (kamailioetcfs-stop-interval-0s)
> > Clone: fence_kam2_xvm-clone
> > Meta Attrs: interleave=true clone-max=2 clone-node-max=1
> > Resource: fence_kam2_xvm (class=stonith type=fence_xvm)
> > Attributes: port=tegamjg_kam2 pcmk_host_list=kam2vs3
> > Operations: monitor interval=60s (fence_kam2_xvm-monitor-interval-60s)
> > Master: kamailioetcclone
> > Meta Attrs: master-max=1 master-node-max=1 clone-max=2
> > clone-node-max=1 notify=t
> > rue on-fail=fence
> > Resource: kamailioetc (class=ocf provider=linbit type=drbd)
> > Attributes: drbd_resource=kamailioetc
> > Operations: start interval=0s timeout=240 (kamailioetc-start-interval-0s)
> > promote interval=0s on-fail=fence
> > (kamailioetc-promote-interval-0s)
> > demote interval=0s on-fail=fence
> > (kamailioetc-demote-interval-0s)
> > stop interval=0s on-fail=fence (kamailioetc-stop-interval-0s)
> > monitor interval=10s (kamailioetc-monitor-interval-10s)
> > Clone: fence_kam1_xvm-clone
> > Meta Attrs: interleave=true clone-max=2 clone-node-max=1
> > Resource: fence_kam1_xvm (class=stonith type=fence_xvm)
> > Attributes: port=tegamjg_kam1 pcmk_host_list=kam1vs3
> > Operations: monitor interval=60s (fence_kam1_xvm-monitor-interval-60s)
> > Resource: kamailiocluster (class=ocf provider=heartbeat type=kamailio)
> > Attributes: listen_address=10.0.1.206
> > conffile=/etc/kamailio/kamailio.cfg pidfil
> >
> > e=/var/run/kamailio.pid monitoring_ip=10.0.1.206
> > monitoring_ip2=10.0.1.207 port=50
> > 60 proto=udp
> > kamctlrc=/etc/kamailio/kamctlrc shmem=128 pkg=8
> > Meta Attrs: target-role=Stopped
> > Operations: start interval=0s timeout=60
> > (kamailiocluster-start-interval-0s)
> > stop interval=0s timeout=30 (kamailiocluster-stop-interval-0s)
> > monitor interval=5s (kamailiocluster-monitor-interval-5s)
> >
> > Stonith Devices:
> > Fencing Levels:
> >
> > Location Constraints:
> > Ordering Constraints:
> > start fence_kam1_xvm-clone then start fence_kam2_xvm-clone
> > (kind:Mandatory) (id:
> >
> > order-fence_kam1_xvm-clone-fence_kam2_xvm-clone-mandatory)
> > start fence_kam2_xvm-clone then promote kamailioetcclone
> > (kind:Mandatory) (id:or
> >
> > der-fence_kam2_xvm-clone-kamailioetcclone-mandatory)
> > promote kamailioetcclone then start kamailioetcfs (kind:Optional)
> > (id:order-kama
> > ilioetcclone-kamailioetcfs-Optional)
> > Resource Sets:
> > set kamailioetcfs sequential=true (id:pcs_rsc_set_kamailioetcfs) set
> > ClusterIP
> > ClusterIP2 sequential=false
> > (id:pcs_rsc_set_ClusterIP_ClusterIP2) set rtpproxyclu
> > ster
> > kamailiocluster sequential=true
> > (id:pcs_rsc_set_rtpproxycluster_kamailioclust
> > er)
> > (id:pcs_rsc_order_set_kamailioetcfs_set_ClusterIP_ClusterIP2_set_rtpproxyclust
> >
> > er_kamailiocluster)
> > Colocation Constraints:
> > rtpproxycluster with ClusterIP2 (score:INFINITY)
> > (id:colocation-rtpproxycluster-
> > ClusterIP2-INFINITY)
> > ClusterIP2 with ClusterIP (score:INFINITY)
> > (id:colocation-ClusterIP2-ClusterIP-I
> > NFINITY)
> > ClusterIP with kamailioetcfs (score:INFINITY)
> > (id:colocation-ClusterIP-kamailioe
> > tcfs-INFINITY)
> > kamailioetcfs with kamailioetcclone (score:INFINITY)
> > (with-rsc-role:Master) (id:
> >
> > colocation-kamailioetcfs-kamailioetcclone-INFINITY)
> > fence_kam2_xvm-clone with fence_kam1_xvm-clone (score:INFINITY)
> > (id:colocation-f
> >
> > ence_kam2_xvm-clone-fence_kam1_xvm-clone-INFINITY)
> > kamailioetcclone with fence_kam2_xvm-clone (score:INFINITY)
> > (id:colocation-kamai
> > lioetcclone-fence_kam2_xvm-clone-INFINITY)
> > kamailiocluster with rtpproxycluster (score:INFINITY)
> > (id:colocation-kamailioclu
> > ster-rtpproxycluster-INFINITY)
> >
> > Resources Defaults:
> > migration-threshold: 2
> > failure-timeout: 10m
> > resource-stickiness: 200
> > Operations Defaults:
> > No defaults set
> >
> > Cluster Properties:
> > cluster-infrastructure: corosync
> > cluster-name: kamcluster
> > dc-version: 1.1.13-10.el7_2.2-44eb2dd
> > have-watchdog: false
> > last-lrm-refresh: 1471479940
> > no-quorum-policy: ignore
> > start-failure-is-fatal: false
> > stonith-action: reboot
> > stonith-enabled: true
> >
> > Now my problem is when the rtpproxy systemd resource starts/stops, i am
> > experiencing 2 seconds delay between the call from the start/stop signal
> > is sent to systemd and the confirmation and interpretation of the action
> > to the crmd. I am pretty sure that the initiation of this service doesnt
>
> The problem is that systemd does not have a way to say "start this
> service, and don't tell me it's done until it's completely started".
> Systemd reports successful completion as soon as the start has been
> initiated.
The same holds for LSB init scripts. However, pacemaker didn't
make any effort to check whether the service (typically some kind
of daemon) was actually started/stopped.
> By contrast, Pacemaker can't proceed with dependencies until the service
> is completely up. So, Pacemaker's workaround is to initiate the start,
> then poll the status every 2 seconds until systemd reports the service
> is completely up.
>
> The 2 seconds is hardcoded, so there's no way to avoid that at the
> moment, other than using an OCF agent.
So, is this only for systemd resources or also LSB? Do you know
when the 2 second delay got introduced?
Thanks,
Dejan
> > take even half of that time to start/stop. i did the same thing with a
> > dummy service as a systemd resource and it als takes 2 seconds to
> > start/stop the resource. Also, this is not happening in any of the ocf
> > resources. I am putting what i see in the logs about this behaviour
> >
> > This is after doing "pcs resource restart rtpproxycluster"
> >
> > Aug 17 20:59:18 [13187] kam1 crmd: notice: te_rsc_command:
> > Initiating action 14: stop rtpproxycluster_stop_0 on kam1vs3 (local)
> > Aug 17 20:59:18 [13184] kam1 lrmd: info:
> > cancel_recurring_action: Cancelling systemd operation
> > rtpproxycluster_status_10000
> > Aug 17 20:59:18 [13187] kam1 crmd: info: do_lrm_rsc_op:
> > Performing key=14:30:0:8a202722-ece2-4617-b26e-8d4aa5f3522b
> > op=rtpproxycluster_stop_0
> > Aug 17 20:59:18 [13184] kam1 lrmd: info: log_execute:
> > executing - rsc:rtpproxycluster action:stop call_id:106
> > Aug 17 20:59:18 [13187] kam1 crmd: info: process_lrm_event:
> > Operation rtpproxycluster_monitor_10000: Cancelled (node=kam1vs3,
> > call=104, confirmed=true)
> > Aug 17 20:59:18 [13184] kam1 lrmd: info: systemd_exec_result:
> > Call to stop passed: /org/freedesktop/systemd1/job/8302
> > Aug 17 20:59:20 [13187] kam1 crmd: notice: process_lrm_event:
> > Operation rtpproxycluster_stop_0: ok (node=kam1vs3, call=106, rc=0,
> > cib-update=134, confirmed=true)
> > Aug 17 20:59:20 [13182] kam1 cib: info: cib_perform_op:
> > +
> > /cib/status/node_state[@id='1']/lrm[@id='1']/lrm_resources/lrm_resource[@id='rtpproxycluster']/lrm_rsc_op[@id='rtpproxycluster_last_0']:
> > @operation_key=rtpproxycluster_stop_0, @operation=stop,
> > @transition-key=14:30:0:8a202722-ece2-4617-b26e-8d4aa5f3522b,
> > @transition-magic=0:0;14:30:0:8a202722-ece2-4617-b26e-8d4aa5f3522b,
> > @call-id=106, @last-run=1471481958, @last-rc-change=1471481958,
> > @exec-time=2116
> >
> > Aug 17 20:59:20 [13186] kam1 pengine: info: RecurringOp: Start
> > recurring monitor (10s) for rtpproxycluster on kam1vs3
> > Aug 17 20:59:20 [13186] kam1 pengine: notice: LogActions: Start
> > rtpproxycluster (kam1vs3)
> > Aug 17 20:59:20 [13187] kam1 crmd: notice: te_rsc_command:
> > Initiating action 13: start rtpproxycluster_start_0 on kam1vs3 (local)
> > Aug 17 20:59:20 [13187] kam1 crmd: info: do_lrm_rsc_op:
> > Performing key=13:31:0:8a202722-ece2-4617-b26e-8d4aa5f3522b
> > op=rtpproxycluster_start_0
> > Aug 17 20:59:20 [13184] kam1 lrmd: info: log_execute:
> > executing - rsc:rtpproxycluster action:start call_id:107
> > Aug 17 20:59:21 [13184] kam1 lrmd: info: systemd_exec_result:
> > Call to start passed: /org/freedesktop/systemd1/job/8303
> > Aug 17 20:59:23 [13187] kam1 crmd: notice: process_lrm_event:
> > Operation rtpproxycluster_start_0: ok (node=kam1vs3, call=107, rc=0,
> > cib-update=136, confirmed=true)
> > Aug 17 20:59:23 [13182] kam1 cib: info: cib_perform_op:
> > +
> > /cib/status/node_state[@id='1']/lrm[@id='1']/lrm_resources/lrm_resource[@id='rtpproxycluster']/lrm_rsc_op[@id='rtpproxycluster_last_0']:
> > @operation_key=rtpproxycluster_start_0, @operation=start,
> > @transition-key=13:31:0:8a202722-ece2-4617-b26e-8d4aa5f3522b,
> > @transition-magic=0:0;13:31:0:8a202722-ece2-4617-b26e-8d4aa5f3522b,
> > @call-id=107, @last-run=1471481960, @last-rc-change=1471481960,
> > @exec-time=2068
> >
> > Why is this happening?, many of my resources depends on each other, so
> > the delay it takes when failover its needed is quite a lot (just 4
> > seconds of delay stopping/starting just for that systemd resource.
> >
> > Is this normal?, is there anyway to solve this?, Do i really need to
> > make an OCF resource for that service (that would take some time that i
> > dont really have at this moment)
> >
> > Regards
> >
> > Alejandro
>
> _______________________________________________
> Users mailing list: Users at clusterlabs.org
> http://clusterlabs.org/mailman/listinfo/users
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
More information about the Users
mailing list