[ClusterLabs] Users Digest, Vol 15, Issue 16
dinor geler
dinorg at gmail.com
Tue Apr 12 15:35:27 UTC 2016
help appreciated am totally stuck.
On Tue, Apr 12, 2016 at 4:22 PM, <users-request at clusterlabs.org> wrote:
> Send Users mailing list submissions to
> users at clusterlabs.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://clusterlabs.org/mailman/listinfo/users
> or, via email, send a message with subject or body 'help' to
> users-request at clusterlabs.org
>
> You can reach the person managing the list at
> users-owner at clusterlabs.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users digest..."
>
>
> Today's Topics:
>
> 1. Totem is unable to form a cluster because of an operating
> system or network fault (dinor geler)
> 2. Re: getting "Totem is unable to form a cluster" error
> (Lars Ellenberg)
> 3. Re: getting "Totem is unable to form a cluster" error
> (Jan Pokorn?)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 12 Apr 2016 14:44:40 +0300
> From: dinor geler <dinorg at gmail.com>
> To: users at clusterlabs.org
> Subject: [ClusterLabs] Totem is unable to form a cluster because of an
> operating system or network fault
> Message-ID:
> <
> CAEu-pSKnXQBBYzbwqRPPfLJpZfj9WXZEPJWkz0MeTdFOAVE8ng at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi ,
> Am trying to configure my sql on ubuntu according to this article :
>
> https://azure.microsoft.com/en-in/documentation/articles/virtual-machines-linux-classic-mysql-cluster/
>
> two node cluster
>
>
> looking on corosync log :
>
>
> Apr 12 11:01:09 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:11 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:13 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:16 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:18 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:20 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:22 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:24 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:27 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:29 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
> Apr 12 11:01:31 corosync [TOTEM ] Totem is unable to form a cluster because
> of an operating system or network fault. The most common cause of this
> message is that the local firewall is configured improperly.
>
>
>
> totem {
> version: 2
> crypto_cipher: none
> crypto_hash: none
> interface {
> ringnumber: 0
> bindnetaddr: 10.1.0.0
> mcastport: 5405
> ttl: 1
> }
> transport: udpu
> }
> logging {
> fileline: off
> to_logfile: yes
> to_syslog: yes
> logfile: /var/log/corosync/corosync.log
> debug: off
> timestamp: on
> logger_subsys {
> subsys: QUORUM
> debug: off
> }
> }
> nodelist {
> node {
> ring0_addr: 10.1.0.6
> nodeid: 1
> }
> node {
> ring0_addr: 10.1.0.7
> nodeid: 2
> }
> }
> quorum {
> provider: corosync_votequorum
> }
>
>
> If I initiate a tcpdump on node 2 and start either a netcat or nmap I see
> packet arrives to destination host for port 5405 UDP traffic
>
>
>
> I do see Corosync listening on the IP/PORT
>
>
>
>
>
> root at node-2:/home/dinor# netstat -an | grep -i 5405
>
> udp 0 0 10.1.0.7:5405 0.0.0.0:*
>
>
>
>
>
>
> root at node-1:/home/dinor# netstat -an | grep -i 5405
>
> udp 0 0 10.1.0.6:5405 0.0.0.0:*
>
>
>
>
>
> On node 1 I start a netcat to port 5405 via udp
>
>
>
> netcat -D -4 -u 10.1.0.7 5405
>
>
>
> In here you type some text and hit enter
>
>
>
> On node 1 tcpdump we see data sent to IP 10.1.0.7
>
>
>
> root at node-1:/var/log/corosync# tcpdump -n udp port 5405
>
> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
>
> listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
>
> 10:08:24.484533 IP 10.1.0.6.44299 > 10.1.0.7.5405: UDP, length 26
>
>
>
>
>
>
>
> On node 2 tcpdump I see the data arrive
>
>
>
> root at node-2:/var/log/corosync# tcpdump -n udp port 5405
>
> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
>
> listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
>
> 10:08:24.484892 IP 10.1.0.6.44299 > 10.1.0.7.5405: UDP, length 26
>
>
>
>
>
> Tested also sending UDP packets from node 2 ? all ok.
>
>
>
> So connectivity seems to be ok.
>
>
>
> Port scanner also shows the port as Open
>
>
>
>
>
> root at node-1:/home/dinor# nmap -sUV 10.1.0.7 -p 5402-5405
>
>
>
> Starting Nmap 5.21 ( http://nmap.org ) at 2016-04-12 10:31 UTC
>
> Nmap scan report for node-2 (10.1.0.7)
>
> Host is up (0.00060s latency).
>
> PORT STATE SERVICE VERSION
>
> 5402/udp closed unknown
>
> 5403/udp closed unknown
>
> 5404/udp closed unknown
>
> *5405/udp open|filtered unknown*
>
> MAC Address: 12:34:56:78:9A:BC (Unknown)
>
>
>
> Service detection performed. Please report any incorrect results at
> http://nmap.org/submit/ .
>
> Nmap done: 1 IP address (1 host up) scanned in 79.07 seconds
>
>
>
>
>
> There is no FW and no selinux enabled
>
>
> help appreciated.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://clusterlabs.org/pipermail/users/attachments/20160412/184f5189/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Tue, 12 Apr 2016 15:03:35 +0200
> From: Lars Ellenberg <lars.ellenberg at linbit.com>
> To: users at clusterlabs.org
> Subject: Re: [ClusterLabs] getting "Totem is unable to form a cluster"
> error
> Message-ID: <20160412130335.GG3078 at soda.linbit>
> Content-Type: text/plain; charset=iso-8859-1
>
> On Mon, Apr 11, 2016 at 08:23:03AM +0200, Jan Friesse wrote:
>
> ...
> >>> bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
> UP
> >>> link/ether 74:e6:e2:73:e5:61 brd ff:ff:ff:ff:ff:ff
> >>> inet 10.150.20.91/24 brd 10.150.20.55 scope global bond0
> >>> inet 192.168.150.12/22 brd 192.168.151.255 scope global
> bond0:cluster
> >>> inet6 fe80::76e6:e2ff:fe73:e561/64 scope link
> >>> valid_lft forever preferred_lft forever
> >>
> >> This is ifconfig output? I'm just wondering how you were able to set
> >> two ipv4 addresses (in this format, I would expect another interface
> >> like bond0:1 or nothing at all)?
> ...
>
> No, it is "ip addr show" output.
>
> > RHEL 6:
> >
> > # tunctl -p
> > Set 'tap0' persistent and owned by uid 0
> >
> > # ip addr add 192.168.7.1/24 dev tap0
> > # ip addr add 192.168.8.1/24 dev tap0
> > # ifconfig tap0
> > tap0 Link encap:Ethernet HWaddr 22:95:B1:85:67:3F
> > inet addr:192.168.7.1 Bcast:0.0.0.0 Mask:255.255.255.0
> > BROADCAST MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:500
> > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
>
> # ip addr add 192.168.7.1/24 dev tap0
> # ip addr add 192.168.8.1/24 dev tap0 label tap0:jan
> # ip addr show dev tap0
>
> And as long as you actually use those "label"s,
> you then can even see these with "ifconfig tap0:jan".
>
>
> --
> : Lars Ellenberg
> : LINBIT | Keeping the Digital World Running
> : DRBD -- Heartbeat -- Corosync -- Pacemaker
> : R&D, Integration, Ops, Consulting, Support
>
> DRBD? and LINBIT? are registered trademarks of LINBIT
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 12 Apr 2016 15:17:51 +0200
> From: Jan Pokorn? <jpokorny at redhat.com>
> To: Cluster Labs - All topics related to open-source clustering
> welcomed <users at clusterlabs.org>
> Subject: Re: [ClusterLabs] getting "Totem is unable to form a cluster"
> error
> Message-ID: <20160412131751.GD5206 at redhat.com>
> Content-Type: text/plain; charset="us-ascii"
>
> On 12/04/16 15:03 +0200, Lars Ellenberg wrote:
> > On Mon, Apr 11, 2016 at 08:23:03AM +0200, Jan Friesse wrote:
> >
> > ...
> >>>> bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
> UP
> >>>> link/ether 74:e6:e2:73:e5:61 brd ff:ff:ff:ff:ff:ff
> >>>> inet 10.150.20.91/24 brd 10.150.20.55 scope global bond0
> >>>> inet 192.168.150.12/22 brd 192.168.151.255 scope global
> bond0:cluster
> >>>> inet6 fe80::76e6:e2ff:fe73:e561/64 scope link
> >>>> valid_lft forever preferred_lft forever
> >>>
> >>> This is ifconfig output? I'm just wondering how you were able to set
> >>> two ipv4 addresses (in this format, I would expect another interface
> >>> like bond0:1 or nothing at all)?
> > ...
> >
> > No, it is "ip addr show" output.
> >
> >> RHEL 6:
> >>
> >> # tunctl -p
> >> Set 'tap0' persistent and owned by uid 0
> >>
> >> # ip addr add 192.168.7.1/24 dev tap0
> >> # ip addr add 192.168.8.1/24 dev tap0
> >> # ifconfig tap0
> >> tap0 Link encap:Ethernet HWaddr 22:95:B1:85:67:3F
> >> inet addr:192.168.7.1 Bcast:0.0.0.0 Mask:255.255.255.0
> >> BROADCAST MULTICAST MTU:1500 Metric:1
> >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >> collisions:0 txqueuelen:500
> >> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> >
> >
> > # ip addr add 192.168.7.1/24 dev tap0
> > # ip addr add 192.168.8.1/24 dev tap0 label tap0:jan
> > # ip addr show dev tap0
> >
> > And as long as you actually use those "label"s,
> > you then can even see these with "ifconfig tap0:jan".
>
> Further reading: http://inai.de/2008/02/19
>
> --
> Jan (Poki)
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: application/pgp-signature
> Size: 819 bytes
> Desc: not available
> URL: <
> http://clusterlabs.org/pipermail/users/attachments/20160412/eca021cb/attachment.sig
> >
>
> ------------------------------
>
> _______________________________________________
> Users mailing list
> Users at clusterlabs.org
> http://clusterlabs.org/mailman/listinfo/users
>
>
> End of Users Digest, Vol 15, Issue 16
> *************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/users/attachments/20160412/ac43a7db/attachment-0003.html>
More information about the Users
mailing list