[ClusterLabs] getting "Totem is unable to form a cluster" error

Muhammad Sharfuddin M.Sharfuddin at nds.com.pk
Fri Apr 8 08:24:56 EDT 2016


On 04/08/16 13:01, Jan Friesse wrote:
 >> pacemaker 1.1.12-11.12
 >> openais 1.1.4-5.24.5
 >> corosync 1.4.7-0.23.5
 >>
 >> Its a two node active/passive cluster and we just upgraded the SLES 11
 >> SP 3 to SLES 11 SP 4(nothing  else) but when we try to start the cluster
 >> service we get the following error:
 >>
 >> "Totem is unable to form a cluster because of an operating system or
 >> network fault."
 >>
 >> Firewall is stopped and disabled on both the nodes. Both nodes can
 >> ping/ssh/vnc each other.
 >
 > Hard to help. First of all, I would recommend to ask SUSE support 
because I don't really have access to source code of corosync 
1.4.7-0.23.5 package, so really don't know what patches are added.
 >
 >
Yup, ticket opened with SUSE Support.

 >>
 >>
 >>
 >> /var/log/messages:
 >> Apr  6 17:51:49 prd1 corosync[8672]:  [MAIN  ] Corosync Cluster Engine
 >> ('1.4.7'): started and ready to provide service.
 >> Apr  6 17:51:49 prd1 corosync[8672]:  [MAIN  ] Corosync built-in
 >> features: nss
 >> Apr  6 17:51:49 prd1 corosync[8672]:  [MAIN  ] Successfully configured
 >> openais services to load
 >> Apr  6 17:51:49 prd1 corosync[8672]:  [MAIN  ] Successfully read main
 >> configuration file '/etc/corosync/corosync.conf'.
 >> Apr  6 17:51:49 prd1 corosync[8672]:  [TOTEM ] Initializing transport
 >> (UDP/IP Unicast).
 >> Apr  6 17:51:49 prd1 corosync[8672]:  [TOTEM ] Initializing
 >> transmit/receive security: libtomcrypt SOBER128/SHA1HMAC (mode 0).
 >> Apr  6 17:51:49 prd1 corosync[8672]:  [TOTEM ] The network interface is
 >> down.
 >
 > ^^^ This is important line. It means corosync was unable to find 
interface for bindnetaddr 192.168.150.0. Make sure interface with this 
network address exists.
 >
 >
this machine has two IP address assigned on interface bond0

bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
     link/ether 74:e6:e2:73:e5:61 brd ff:ff:ff:ff:ff:ff
     inet 10.150.20.91/24 brd 10.150.20.55 scope global bond0
     inet 192.168.150.12/22 brd 192.168.151.255 scope global bond0:cluster
     inet6 fe80::76e6:e2ff:fe73:e561/64 scope link
        valid_lft forever preferred_lft forever

And I can ping 192.168.150.12 from this machine and from other machines 
on network



--
Regards,

Muhammad Sharfuddin




More information about the Users mailing list