[ClusterLabs] a newbie --question

[‪H Yavari‬ ‪]

I should note this: AppY on Node A works only with AppZ on Node B, and AppY on Node C works only with AppZ on Node D.(Some hardware restrictions)

Regards,


      From: Michael Schwartzkopff <ms at sys4.de>
 
   
Am Dienstag, 15. September 2015, 13:38:59 schrieb H Yavari‬:


> Hi,
> Thanks for reply.
> The problem is Compute resource, the appY and appZ can't run on same Server.
> It is possible ?
> Regards,

As far as I understood:

You have the applications Y and Z and the servers A, B, C and D.

The applications Y and Z cannot run on the same node.



Solution    1:
Make two clusters M (from node A and B) and Cluster N (from nodes C and D). 
Cluster M runs the application Y and Cluster N run the application Z.

Solution 2:
Make one big cluster from all four nodes and configure constraints that the 
applications will not run on the same node. Side note: Basically you only need 
three nodes in this scenario:
- application Y running on node A
- application Z running on node B
- in case of a failure of A or B the cluster starts the failed application on 
node C


Mit freundlichen Grüßen,

Michael Schwartzkopff

-- 
[*] sys4 AG

http://sys4.de, +49 (89) 30 90 46 64, +49 (162) 165 0044
Franziskanerstraße 15, 81669 München

Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
Vorstand: Patrick Ben Koetter, Marc Schiffbauer
Aufsichtsratsvorsitzender: Florian Kirstein

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/users/attachments/20150915/eaaf0093/attachment.htm>