[ClusterLabs] VIP monitoring failing with Timed Out error

Pritam Kharat pritam.kharat at oneconvergence.com
Thu Oct 29 05:10:18 UTC 2015


Thank you very much Ken for reply. I will try your suggested steps.

On Wed, Oct 28, 2015 at 11:23 PM, Ken Gaillot <kgaillot at redhat.com> wrote:

> On 10/28/2015 03:51 AM, Pritam Kharat wrote:
> > Hi All,
> >
> > I am facing one issue in my two node HA. When I stop pacemaker on ACTIVE
> > node, it takes more time to stop and by this time VIP migration with
> other
> > resources migration fails to STANDBY node. (I have seen same issue in
> > ACTIVE node reboot case also)
>
> I assume STANDBY in this case is just a description of the node's
> purpose, and does not mean that you placed the node in pacemaker's
> standby mode. If the node really is in standby mode, it can't run any
> resources.
>
> > Last change: Wed Oct 28 02:52:57 2015 via cibadmin on node-1
> > Stack: corosync
> > Current DC: node-1 (1) - partition with quorum
> > Version: 1.1.10-42f2063
> > 2 Nodes configured
> > 2 Resources configured
> >
> >
> > Online: [ node-1 node-2 ]
> >
> > Full list of resources:
> >
> >  resource (upstart:resource): Stopped
> >  vip (ocf::heartbeat:IPaddr2): Started node-2 (unmanaged) FAILED
> >
> > Migration summary:
> > * Node node-1:
> > * Node node-2:
> >
> > Failed actions:
> >     vip_stop_0 (node=node-2, call=-1, rc=1, status=Timed Out,
> > last-rc-change=Wed Oct 28 03:05:24 2015
> > , queued=0ms, exec=0ms
> > ): unknown error
> >
> > VIP monitor is failing over here with error Timed Out. What is the
> general
> > reason for TimeOut. ? I have kept default-action-timeout=180secs which
> > should be enough for monitoring
>
> 180s should be far more than enough, so something must be going wrong.
> Notice that it is the stop operation on the active node that is failing.
> Normally in such a case, pacemaker would fence that node to be sure that
> it is safe to bring it up elsewhere, but you have disabled stonith.
>
> Fencing is important in failure recovery such as this, so it would be a
> good idea to try to get it implemented.
>
> > I have added order property -> when vip is started then only start other
> > resources.
> > Any clue to solve this problem ? Most of the time this VIP monitoring is
> > failing with Timed Out error.
>
> The "stop" in "vip_stop_0" means that the stop operation is what failed.
> Have you seen timeouts on any other operations?
>
> Look through the logs around the time of the failure, and try to see if
> there are any indications as to why the stop failed.
>
> If you can set aside some time for testing or have a test cluster that
> exhibits the same issue, you can try unmanaging the resource in
> pacemaker, then:
>
> 1. Try adding/removing the IP via normal system commands, and make sure
> that works.
>
> 2. Try running the resource agent manually (with any verbose option) to
> start/stop/monitor the IP to see if you can reproduce the problem and
> get more messages.
>
> _______________________________________________
> Users mailing list: Users at clusterlabs.org
> http://clusterlabs.org/mailman/listinfo/users
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>



-- 
Thanks and Regards,
Pritam Kharat.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.clusterlabs.org/pipermail/users/attachments/20151029/fbde026d/attachment-0002.html>


More information about the Users mailing list