[ClusterLabs] CentOS 7 - Corosync configuration

Willi Fehler willi.fehler at t-online.de
Fri Mar 6 15:05:26 CET 2015


Hi,

anybody an idea? I think something in my corosync configuration is 
incorrect. The default Corosync configuration is working. But I want to 
use redundant rings and secuath should be set to on.

[root at linsrv006 ~]# cat /etc/corosync/corosync.conf
totem {
version: 2
secauth: off
cluster_name: databasecluster
transport: udpu
}

nodelist {
   node {
         ring0_addr: linsrv006.willi-net.local
         nodeid: 1
        }
   node {
         ring0_addr: linsrv007.willi-net.local
         nodeid: 2
        }
}

quorum {
provider: corosync_votequorum
two_node: 1
}

logging {
to_syslog: yes
}

[root at linsrv006 ~]# pcs status
Cluster name: databasecluster
WARNING: no stonith devices and stonith-enabled is not false
Last updated: Fri Mar  6 15:04:13 2015
Last change: Fri Mar  6 15:03:23 2015 via crmd on linsrv007.willi-net.local
Stack: corosync
Current DC: linsrv007.willi-net.local (2) - partition with quorum
Version: 1.1.10-32.el7_0.1-368c726
2 Nodes configured
0 Resources configured


Online: [ linsrv006.willi-net.local linsrv007.willi-net.local ]

Full list of resources:


PCSD Status:
   linsrv006.willi-net.local: Online
   linsrv007.willi-net.local: Online

Daemon Status:
   corosync: active/disabled
   pacemaker: active/disabled
   pcsd: active/enabled

Regards - Willi

Am 06.03.15 um 10:49 schrieb Willi Fehler:
> Hi,
>
> I've fixed the node issue. I changed the /etc/hosts file and rebuilded 
> the Cluster with the fqdn names:
>
> [root at linsrv006 corosync]# pcs status
> Cluster name:
> WARNING: no stonith devices and stonith-enabled is not false
> Last updated: Fri Mar  6 10:47:25 2015
> Last change: Fri Mar  6 10:45:43 2015 via crmd on 
> linsrv006.willi-net.local
> Stack: corosync
> Current DC: NONE
> 2 Nodes configured
> 0 Resources configured
>
>
> Node linsrv006.willi-net.local (1): UNCLEAN (offline)
> Node linsrv007.willi-net.local (2): UNCLEAN (offline)
>
> Full list of resources:
>
>
> PCSD Status:
>   192.168.0.9: Unable to authenticate
>   192.168.0.10: Unable to authenticate
>
> Daemon Status:
>   corosync: active/disabled
>   pacemaker: active/disabled
>   pcsd: active/enabled
>
>
>
>
> totem {
>   version: 2
>   threads: 2
>   secauth: on
>   cluster_name: databasecluster
>   rrp_mode: passive
>   join: 100
>   max_messages: 20
>   vstype: none
>   token: 1000
>   consensus: 1200
>   clear_node_high_bit: true
>   token_retransmits_before_loss_const: 10
>   interface {
>           ringnumber: 0
>           bindnetaddr: 192.168.0.0
>           mcastaddr: 239.255.1.1
>           mcastport: 5404
>   }
>   interface {
>           ringnumber: 1
>           bindnetaddr: 10.10.10.0
>           mcastaddr: 239.255.2.1
>           mcastport: 5406
>   }
>   transport: udpu
> }
>
> nodelist {
>   node {
>         ring0_addr: 192.168.0.9
>     ring1_addr: 10.10.10.1
>         nodeid: 1
>        }
>   node {
>         ring0_addr: 192.168.0.10
>         ring1_addr: 10.10.10.2
>     nodeid: 2
>        }
> }
>
> logging {
> to_syslog: yes
> }
>
>
>
> [root at linsrv006 corosync]# tail -f /var/log/messages
> Mar  6 10:49:02 linsrv006 stonith-ng[8025]: notice: get_node_name: 
> Could not obtain a node name for corosync nodeid 2
> Mar  6 10:49:02 linsrv006 crmd[8029]: error: cluster_connect_quorum: 
> Corosync quorum is not configured
> Mar  6 10:49:02 linsrv006 stonith-ng[8025]: notice: 
> corosync_node_name: Unable to get node name for nodeid 1
> Mar  6 10:49:02 linsrv006 stonith-ng[8025]: notice: get_node_name: 
> Defaulting to uname -n for the local corosync node name
> Mar  6 10:49:02 linsrv006 crmd[8029]: notice: corosync_node_name: 
> Unable to get node name for nodeid 1
> Mar  6 10:49:02 linsrv006 crmd[8029]: notice: corosync_node_name: 
> Unable to get node name for nodeid 2
> Mar  6 10:49:02 linsrv006 crmd[8029]: notice: corosync_node_name: 
> Unable to get node name for nodeid 2
> Mar  6 10:49:02 linsrv006 crmd[8029]: notice: get_node_name: Could not 
> obtain a node name for corosync nodeid 2
> Mar  6 10:49:02 linsrv006 crmd[8029]: notice: corosync_node_name: 
> Unable to get node name for nodeid 2
> Mar  6 10:49:02 linsrv006 crmd[8029]: notice: get_node_name: Could not 
> obtain a node name for corosync nodeid 2
>
> Regards - Willi
>
> Am 06.03.15 um 10:41 schrieb Willi Fehler:
>> [root at linsrv006 corosync]# rpm -qa | grep corosync
>> corosynclib-2.3.3-2.el7_0.1.x86_64
>> corosync-2.3.3-2.el7_0.1.x86_64
>>
>> Am 06.03.15 um 10:32 schrieb Michael Schwartzkopff:
>>> Am Freitag, 6. März 2015, 10:18:46 schrieb Willi Fehler:
>>>> Hi Michael,
>>>>
>>>> firewalld is disabled. It looks like corosync-objctl does not exist.
>>>>
>>>> Regards - Willi
>>> which version of corosync?
>>>
>>> Mit freundlichen Grüßen,
>>>
>>> Michael Schwartzkopff
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list:Users at clusterlabs.org
>>> http://clusterlabs.org/mailman/listinfo/users
>>>
>>> Project Home:http://www.clusterlabs.org
>>> Getting started:http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs:http://bugs.clusterlabs.org
>>
>>
>>
>> _______________________________________________
>> Users mailing list:Users at clusterlabs.org
>> http://clusterlabs.org/mailman/listinfo/users
>>
>> Project Home:http://www.clusterlabs.org
>> Getting started:http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs:http://bugs.clusterlabs.org
>
>
>
> _______________________________________________
> Users mailing list: Users at clusterlabs.org
> http://clusterlabs.org/mailman/listinfo/users
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://clusterlabs.org/pipermail/users/attachments/20150306/6826122b/attachment.html>


More information about the Users mailing list