[ClusterLabs] error external/libvirt device not accessible

[Oscar Salvador]

Hi,

I've seen I made a mistake with -INFINITY, I confuse something, so you can
ignore the part I'm talking about -INFINITY.
I saw I specified this with "-inf"

Thanks
Oscar

2015-06-15 10:43 GMT+02:00 Oscar Salvador <osalvador.vilardaga at gmail.com>:

> Hi!
>
> I have a problem with fencing.
> I'm using fence-agents, and a configured a one that uses libvirt device.
>
> Versions:
>
> fence-agents                   4.0.18
> corosync                        2.3.4
> pacemaker                      1.1.12
>
> Here is the configuration:
>
> node 1053402612: server01
> node 1053402613: server02
> primitive IP-rsc_nginx IPaddr2 \
>         params ip=xx.xx.xx.xx nic=eth0 cidr_netmask=xx.xx.xx.xx \
>         meta migration-threshold=2 \
>         op monitor interval=20 timeout=60 on-fail=restart
> primitive Nginx-rsc nginx \
>         meta migration-threshold=2 \
>         op monitor interval=20 timeout=60 on-fail=restart
> primitive p_fence_server01 stonith:external/libvirt \
>         params hostlist=server01
> hypervisor_uri="qemu+tcp://virtnode01/system" \
>         op monitor interval=60
> primitive p_fence_server02 stonith:external/libvirt \
>         params hostlist=server02
> hypervisor_uri="qemu+tcp://virtnode02/system" \
>         op monitor interval=60
> location l_fence_server01 p_fence_server01 -inf: server01
> location l_fence_server02 p_fence_server02 -inf: server02
> colocation lb-loc inf: IP-rsc_nginx Nginx-rsc
> order lb-ord inf: IP-rsc_nginx Nginx-rsc
> property cib-bootstrap-options: \
>         stonith-enabled=true \
>         no-quorum-policy=ignore \
>         default-resource-stickiness=100 \
>         dc-version=1.1.12-561c4cf \
>         cluster-infrastructure=corosync
>
>
> Whe I commit the conf, I can see the followning in the logs:
>
> First:
>
> *Jun 15 10:16:05 [27835] server02   stonithd:     info: cib_device_update:
>       Device p_fence_server02 has been disabled on server02:
> score=-INFINITY*
>
> Since I specifed a location with:
>
> "*location l_fence_server02 p_fence_server02 -inf: server02*"
>
> Why it put an -INFINITY score? It is the default behaviour? As far as I
> know, -INFINITY means "not run this resource on this node".
>
> Then I receive:
>
>
> *Jun 15 10:16:05 [27835] server02   stonithd:     info:
> xml_patch_version_check:         Current num_updates is too high (8 > 7)*
>
> *Jun 15 10:16:07 server02 stonith: [30410]: WARN: external_status:
> 'libvirt status' failed with rc 1*
> *Jun 15 10:16:07 server02 stonith: [30410]: ERROR: external/libvirt device
> not accessible.*
> *Jun 15 10:16:07 [27835] server02   stonithd:     info:
> internal_stonith_action_execute:         Attempt 2 to execute fence_legacy
> (monitor). remaining timeout is 19*
> *Jun 15 10:16:09 server02 stonith: [30435]: WARN: external_status:
> 'libvirt status' failed with rc 1*
> *Jun 15 10:16:09 server02 stonith: [30435]: ERROR: external/libvirt device
> not accessible.*
>
>
> *Jun 15 10:16:09 [27835] server02   stonithd:     info:
> update_remaining_timeout:        Attempted to execute agent fence_legacy
> (monitor) the maximum number of times (2) allowed *
> *Jun 15 10:16:09 [27835] server02   stonithd:   notice: log_operation:
> Operation 'monitor' [30434] for device 'p_fence_server01' returned: -201
> (Generic Pacemaker error)*
> *Jun 15 10:16:09 [27835] server02   stonithd:  warning: log_operation:
> p_fence_server01:30434 [ Performing: stonith -t external/libvirt -S ]*
> *Jun 15 10:16:09 [27835] server02   stonithd:  warning: log_operation:
> p_fence_server01:30434 [ failed:  1 ]*
>
>
> One think it called my attention was:
>
> "Performing: stonith -t external/libvirt -S"
>
> If I execute this command, I receive:
>
> *# stonith -t external/libvirt -S*
> *Must specify either -p option, -F option, -E option, or name=value style
> arguments*
> *usage:*
> * stonith [-svh] -L*
> * stonith [-svh] -t stonith-device-type -n*
> * stonith [-svh] -t stonith-device-type -m*
> * stonith [-svh] -t stonith-device-type {-p stonith-device-parameters | -F
> stonith-device-parameters-file | -E | name=value...} [-c count] -lS*
> * stonith [-svh] -t stonith-device-type {-p stonith-device-parameters | -F
> stonith-device-parameters-file | -E | name=value...} [-c count] -T
> {reset|on|off} nodename*
>
> *where:*
> * -L list supported stonith device types*
> * -l list hosts controlled by this stonith device*
> * -S report stonith device status*
> * -s silent*
> * -v verbose*
> * -n output the config names of stonith-device-parameters*
> * -m display meta-data of the stonith device type*
> * -h display detailed help message with stonith device description(s)*
>
>
> Si, it seems that it is executed with some missing parameters.
>
> Anyone has an idea?
>
> Thank you very much in advance
> Oscar
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/users/attachments/20150615/35bc5454/attachment.htm>