[ClusterLabs] Regarding IP tables and IP Address clone
Somanaththilak jeeva
thilak.jst at gmail.com
Wed Dec 23 13:47:25 UTC 2015
> Am Mittwoch, 23. Dezember 2015, 12:28:06 schrieb Ulrich Windl:
>* >>> Somanath Jeeva <somanath.jeeva at ericsson.com <http://clusterlabs.org/mailman/listinfo/users>> schrieb am 23.12.2015 um*
>* >>> 06:01 in*
>* Nachricht <4F5E5141ED95FF45B3128F3C7B1B2A6721ABE07B at eusaamb109.ericsson.se <http://clusterlabs.org/mailman/listinfo/users>>:*
>* > Hi ,*
>* > *
>* > Thanks for the quick reply.*
>* > *
>* > I will check with our IT team regarding the multicast MAC at switch level.*
>* > *
>* > But the Virtual IP is reachable for 15 minutes or so after I start the*
>* > pacemaker/Corosync service. After which it becomes unreachable. However*
>* > when I restart the iptables service it becomes reachable again for*
>* > another 15 min.*
>* It could be some ARP cache problem. Maybe watch it.*
> Please check the ARP tables of your switches / routers. IP address clones use
> multicast MAC addresses for the unicast IP address. Some switches (esp Cisco)
> do not like that. You would have to configure the MAC addresses manually.
Do I have to configure this MAC address manually at switch level?. The
Multicast MAC was automatically added in the iptables after started
the pacemaker/Corosync service.
# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 CLUSTERIP all -- 0.0.0.0/0 10.61.150.55
CLUSTERIP hashmode=sourceip clustermac=51:33:83:16:0A:BF total_nodes=2
local_node=1 hash_init=0
2 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
> Mit freundlichen Grüßen,
> Michael Schwartzkopff
--
With Regards
Somanath Thilak.J
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/users/attachments/20151223/0d1f5996/attachment.htm>
More information about the Users
mailing list