[ClusterLabs] Antw: Re: Antw: Re: Antw: Re: Antw: pacemaker doesn't correctly handle a resource after time/date change

Vladislav Bogdanov bubble at hoster-ok.com
Fri Aug 28 05:31:50 EDT 2015


28.08.2015 12:25, Kostiantyn Ponomarenko wrote:
> In my case the final solution will be shipped to different counties
> which means different time zones.

Why not to keep all HW clocks in UTC?

> And the replacement of one of the nodes in the working solution could
> happens.
> So the possibilities of the issue to happen is still there.
>
> Thank you,
> Kostya
>
> On Fri, Aug 28, 2015 at 10:02 AM, Andrew Beekhof <andrew at beekhof.net
> <mailto:andrew at beekhof.net>> wrote:
>
>
>     > On 21 Aug 2015, at 11:06 pm, Kostiantyn Ponomarenko <konstantin.ponomarenko at gmail.com
>     <mailto:konstantin.ponomarenko at gmail.com>> wrote:
>     >
>     > As I wrote in the previous email, it could happen when NTP servers are unreachable before Pacemaker's start, and then, after some time, NTP becomes reachable again.
>     > So it is possible that time will be synchronized in any direction: 15 min or 23 min or 1 hour or 12 hours backward/forward.
>
>     If your clock is drifting by hours during a reboot cycle, then I
>     would suggest you have a hardware issue that needs attending to.
>
>      > And in that case the bug will appear itself.
>      >
>      > Thank you,
>      > Kostya
>      >
>      > On Mon, Aug 17, 2015 at 3:01 AM, Andrew Beekhof
>     <andrew at beekhof.net <mailto:andrew at beekhof.net>> wrote:
>      >
>      > > On 8 Aug 2015, at 12:43 am, Kostiantyn Ponomarenko
>     <konstantin.ponomarenko at gmail.com
>     <mailto:konstantin.ponomarenko at gmail.com>> wrote:
>      > >
>      > > Hi Andrew,
>      > >
>      > > So the issue is:
>      > >
>      > > Having one node up and running, set time on the node backward
>     to, say, 15 min (generally more than 10 min), then do "stop" for a
>     resource.
>      > > That leads to the next - the cluster fails the resource once,
>     then shows it as "started", but the resource actually remains "stopped".
>      > >
>      > > Do you need more input from me on the issue?
>      >
>      > I think “why” :)
>      >
>      > I’m struggling to imagine why this would need to happen.
>      >
>      > >
>      > > Thank you,
>      > > Kostya
>      > >
>      > > On Wed, Aug 5, 2015 at 3:01 AM, Andrew Beekhof
>     <andrew at beekhof.net <mailto:andrew at beekhof.net>> wrote:
>      > >
>      > > > On 4 Aug 2015, at 7:31 pm, Kostiantyn Ponomarenko
>     <konstantin.ponomarenko at gmail.com
>     <mailto:konstantin.ponomarenko at gmail.com>> wrote:
>      > > >
>      > > >
>      > > > On Tue, Aug 4, 2015 at 3:57 AM, Andrew Beekhof
>     <andrew at beekhof.net <mailto:andrew at beekhof.net>> wrote:
>      > > > Github might be another.
>      > > >
>      > > > I am not able to open an issue/bug here
>     https://github.com/ClusterLabs/pacemaker
>      > >
>      > > Oh, for pacemaker bugs see http://clusterlabs.org/help.html
>      > > Can someone clearly state what the issue is?  The thread was
>     quite fractured and hard to follow.
>      > >
>      > > >
>      > > > Thank you,
>      > > > Kostya
>      > > > _______________________________________________
>      > > > Users mailing list: Users at clusterlabs.org
>     <mailto:Users at clusterlabs.org>
>      > > > http://clusterlabs.org/mailman/listinfo/users
>      > > >
>      > > > Project Home: http://www.clusterlabs.org
>      > > > Getting started:
>     http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>      > > > Bugs: http://bugs.clusterlabs.org
>      > >
>      > >
>      > > _______________________________________________
>      > > Users mailing list: Users at clusterlabs.org
>     <mailto:Users at clusterlabs.org>
>      > > http://clusterlabs.org/mailman/listinfo/users
>      > >
>      > > Project Home: http://www.clusterlabs.org
>      > > Getting started:
>     http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>      > > Bugs: http://bugs.clusterlabs.org
>      > >
>      > > _______________________________________________
>      > > Users mailing list: Users at clusterlabs.org
>     <mailto:Users at clusterlabs.org>
>      > > http://clusterlabs.org/mailman/listinfo/users
>      > >
>      > > Project Home: http://www.clusterlabs.org
>      > > Getting started:
>     http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>      > > Bugs: http://bugs.clusterlabs.org
>      >
>      >
>      > _______________________________________________
>      > Users mailing list: Users at clusterlabs.org
>     <mailto:Users at clusterlabs.org>
>      > http://clusterlabs.org/mailman/listinfo/users
>      >
>      > Project Home: http://www.clusterlabs.org
>      > Getting started:
>     http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>      > Bugs: http://bugs.clusterlabs.org
>      >
>      > _______________________________________________
>      > Users mailing list: Users at clusterlabs.org
>     <mailto:Users at clusterlabs.org>
>      > http://clusterlabs.org/mailman/listinfo/users
>      >
>      > Project Home: http://www.clusterlabs.org
>      > Getting started:
>     http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>      > Bugs: http://bugs.clusterlabs.org
>
>
>     _______________________________________________
>     Users mailing list: Users at clusterlabs.org <mailto:Users at clusterlabs.org>
>     http://clusterlabs.org/mailman/listinfo/users
>
>     Project Home: http://www.clusterlabs.org
>     Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>     Bugs: http://bugs.clusterlabs.org
>
>
>
>
> _______________________________________________
> Users mailing list: Users at clusterlabs.org
> http://clusterlabs.org/mailman/listinfo/users
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>





More information about the Users mailing list