[Pacemaker] Pacemaker + drbd + Cman Error: gfs_controld join connect error: Connection refused error mounting lockproto lock_dlm

raby shonguiz at gmail.com
Sun Jan 4 20:01:38 UTC 2015


Hi this is the drbdadm dump




















*# resource pcmAppData on pcmk-1: not ignored, not stacked# defined at
/etc/drbd.conf:10resource pcmAppData {    on pcmk-1 {
device           /dev/drbd1 minor 1;        disk
/dev/mapper/VolGroup-drbd--demo;        meta-disk        internal;
address          ipv4 192.168.203.128:7789
<http://192.168.203.128:7789>;    }    on pcmk-2 {        device
/dev/drbd1 minor 1;        disk
/dev/mapper/VolGroup-drbd--demo;        meta-disk        internal;
address          ipv4 192.168.203.130:7789
<http://192.168.203.130:7789>;    }    net {        verify-alg
sha1;        allow-two-primaries yes;    }}*

and this is the pacemaker configuration

































*node pcmk-1 \    attributes standby="off"node pcmk-2 \    attributes
standby="off"primitive ClusterIP ocf:heartbeat:IPaddr2 \    params
ip="192.168.203.150" cidr_netmask="32" \    op monitor
interval="30s"primitive PcmData ocf:linbit:drbd \    params
drbd_resource="pcmAppData" \    op monitor interval="60s"primitive PcmFS
ocf:heartbeat:Filesystem \    params device="/dev/drbd/by-res/pcmAppData"
directory="/home/hassan/logs" fstype="gfs2"primitive PcmtestApp
ocf:raby:RabyAgent \    op monitor interval="100ms" \    meta
target-role="Started" migration-threshold="1" failure-timeout="1"ms
PcmDataClone PcmData \    meta master-max="2" master-node-max="1"
clone-max="2" clone-node-max="1" notify="true" target-role="Started"clone
ClusterIPClone ClusterIP \    meta golbally-unique="true" clone-max="2"
clone-node-max="2"clone PcmFSClone PcmFSclone PcmtestAppClone
PcmtestAppcolocation PcmtestApp-with-PcmFS inf: PcmtestAppClone
PcmFSClonecolocation PcmtestApp-with-ip inf: PcmtestAppClone
ClusterIPClonecolocation fs_on_drbd inf: PcmFSClone
PcmDataClone:Masterorder PcmFS-after-PcmData inf: PcmDataClone:promote
PcmFSClone:startorder PcmtestApp-after-PcmFS inf: PcmFSClone
PcmtestAppCloneproperty $id="cib-bootstrap-options" \
dc-version="1.1.6-9971ebba4494012a93c03b40a2c58ec0eb60f50c" \
cluster-infrastructure="cman" \    expected-quorum-votes="2" \
stonith-enabled="false" \    no-quorum-policy="ignore" \
last-lrm-refresh="1417122793"*


As for the update, i unfortunately cannot to upgrade to Ubuntu-14 +
pacemaker 1.1


2015-01-02 14:48 GMT-08:00 Digimer <lists at alteeve.ca>:

> Pacemaker 1.1.6 is very, very old. If you can upgrade to Ubuntu 14.04 LTS
> you will get 1.1.10 (or newer). A *lot* changed in the meantime, plus a lot
> of bug fixes.
>
> Can you upgrade?
>
> If you still have trouble, please reply with your pacemaker configuration
> as well, and the 'drbdadm dump' output wouldn't hurt.
>
> On 02/01/15 05:39 PM, raby wrote:
>
>> Hi i am following the cluster from scratch guide to set up an active
>> active drbd configuration. here is my configuration
>> Ubuntu 12 kernel 3.11.0-19-generic
>> pacemaker 1.1.6
>> corosync 1.4.2
>> cman 3.1.7
>> gfs2 3.1.3
>>
>> I am trying to do
>> *mount /dev/drbd1*
>> and i get this message
>> /gfs_controld join connect error: Connection refused
>> error mounting lockproto lock_dlm/
>>
>> here is the corosync configuration:
>> /# Please read the corosync.conf.5 manual page
>>
>> compatibility: whitetank
>>
>> totem {
>>      version: 2
>>      secauth: off
>>      threads: 0
>>      interface {
>>
>>                  member {
>>                          memberaddr: 192.168.203.128
>>                  }
>>                  member {
>>                          memberaddr: 192.168.203.130
>>                  }
>>
>>
>>          ringnumber: 0
>> bindnetaddr: 192.168.203.0
>> mcastaddr: 239.255.1.1
>> mcastport: 4000
>>          ttl: 1
>>      }
>> }
>>
>> logging {
>>      fileline: off
>>      to_stderr: no
>>      to_logfile: yes
>>      to_syslog: yes
>>      logfile: /var/log/cluster/corosync.log
>>      debug: off
>>      timestamp: on
>>      logger_subsys {
>>          subsys: AMF
>>          debug: off
>>      }
>> }
>>
>> amf {
>>      mode: disabled
>> }
>>
>>
>> service {
>>
>>   # Load the Pacemaker Cluster Resource Manager
>>   ver: 1
>>   name: pacemaker
>>   }
>>   aisexec {
>>   user: root
>>   group: root
>>   }/
>>
>> The cluster.conf configuration
>> /<?xml version="1.0"?>
>> <cluster config_version="1" name="PcmkCluster">
>>      <logging debug="off"/>
>>      <clusternodes>
>>          <clusternode name="pcmk-1" nodeid="1">
>>              <fence>
>>                  <method name="pcmk-redirect">
>>                      <device name="pcmk" port="pcmk-1"/>
>>                  </method>
>>              </fence>
>>          </clusternode>
>>          <clusternode name="pcmk-2" nodeid="2">
>>              <fence>
>>                  <method name="pcmk-redirect">
>>                      <device name="pcmk" port="pcmk-2"/>
>>                  </method>
>>              </fence>
>>          </clusternode>
>>      </clusternodes>
>>      <fencedevices>
>>          <fencedevice name="pcmk" agent="fence_pcmk"/>
>>      </fencedevices>
>> </cluster>/
>>
>> On the previous threads i have seen that you have to check how dlm is
>> managed but i have no idea how to check that, ant help ? thanks.
>>
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>>
>
> --
> Digimer
> Papers and Projects: https://alteeve.ca/w/
> What if the cure for cancer is trapped in the mind of a person without
> access to education?
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20150104/c2c9059c/attachment.htm>


More information about the Pacemaker mailing list