[Pacemaker] [Problem] lrmd detects monitor time-out by revision of the system time.

renayama19661014 at ybb.ne.jp renayama19661014 at ybb.ne.jp
Fri Sep 5 04:22:18 UTC 2014


Hi All,

We confirmed that lrmd caused the time-out of the monitor when the time of the system was revised.
When a system considers revision of the time when I used ntpd, it is a problem very much.

We can confirm this problem in the next procedure.

Step1) Start Pacemaker in a single node.
[root at snmp1 ~]# start pacemaker.combined
pacemaker.combined start/running, process 11382

Step2) Send simple crm.

--------trac2915-3.crm------------
primitive prmDummyA ocf:pacemaker:Dummy1 \
    op start interval="0s" timeout="60s" on-fail="restart" \
    op monitor interval="10s" timeout="30s" on-fail="restart" \
    op stop interval="0s" timeout="60s" on-fail="block"
group grpA prmDummyA
location rsc_location-grpA-1 grpA \
    rule $id="rsc_location-grpA-1-rule"   200: #uname eq snmp1 \
    rule $id="rsc_location-grpA-1-rule-0" 100: #uname eq snmp2

property $id="cib-bootstrap-options" \
    no-quorum-policy="ignore" \
    stonith-enabled="false" \
    crmd-transition-delay="2s"
rsc_defaults $id="rsc-options" \
    resource-stickiness="INFINITY" \
    migration-threshold="1"
----------------------------------

[root at snmp1 ~]# crm configure load update trac2915-3.crm 
WARNING: rsc_location-grpA-1: referenced node snmp2 does not exist

[root at snmp1 ~]# crm_mon -1 -Af
Last updated: Fri Sep  5 13:09:45 2014
Last change: Fri Sep  5 13:09:13 2014
Stack: corosync
Current DC: snmp1 (3232238180) - partition WITHOUT quorum
Version: 1.1.12-561c4cf
1 Nodes configured
1 Resources configured


Online: [ snmp1 ]

 Resource Group: grpA
     prmDummyA  (ocf::pacemaker:Dummy1):        Started snmp1 

Node Attributes:
* Node snmp1:

Migration summary:
* Node snmp1: 

Step3) After the monitor of the resource just began, we push forward time than the timeout(timeout="30s") of the monitor.
[root at snmp1 ~]#  date -s +40sec
Fri Sep  5 13:11:04 JST 2014

Step4) The time-out of the monitor occurs.

[root at snmp1 ~]# crm_mon -1 -Af
Last updated: Fri Sep  5 13:11:24 2014
Last change: Fri Sep  5 13:09:13 2014
Stack: corosync
Current DC: snmp1 (3232238180) - partition WITHOUT quorum
Version: 1.1.12-561c4cf
1 Nodes configured
1 Resources configured


Online: [ snmp1 ]


Node Attributes:
* Node snmp1:

Migration summary:
* Node snmp1: 
   prmDummyA: migration-threshold=1 fail-count=1 last-failure='Fri Sep  5 13:11:04 2014'

Failed actions:
    prmDummyA_monitor_10000 on snmp1 'unknown error' (1): call=7, status=Timed Out, last-rc-change='Fri Sep  5 13:11:04 2014', queued=0ms, exec=0ms


I confirmed some problems, but seem to be caused by the fact that an event occurs somehow or other in g_main_loop of lrmd in the period when it is shorter than a monitor.

This problem does not seem to happen somehow or other in lrmd of PM1.0.

Best Regards,
Hideo Yamauchi.





More information about the Pacemaker mailing list