[Pacemaker] DRBD with Pacemaker on CentOs 6.5

Sihan Goi goister at gmail.com
Tue Oct 28 10:16:17 UTC 2014


Hi,

I followed those steps previously. I just tried it again, but I'm still
getting the same error. My "crm configure show" shows the following:

node node01 \
        attributes standby=off
node node02
primitive ClusterIP IPaddr2 \
        params ip=192.168.1.110 cidr_netmask=24 \
        op monitor interval=30s
primitive WebData ocf:linbit:drbd \
        params drbd_resource=wwwdata \
        op monitor interval=60s
primitive WebFS Filesystem \
        params device="/dev/drbd/by-res/wwwdata" directory="/var/www/html"
fstype=ext4
primitive WebSite apache \
        params configfile="/etc/httpd/conf/httpd.conf" \
        op monitor interval=1min
ms WebDataClone WebData \
        meta master-max=1 master-node-max=1 clone-max=2 clone-node-max=1
notify=true
location prefer-node01 WebSite 50: node01
colocation WebSite-with-WebFS inf: WebSite WebFS
colocation fs_on_drbd inf: WebFS WebDataClone:Master
colocation website-with-ip inf: WebSite ClusterIP
order WebFS-after-WebData inf: WebDataClone:promote WebFS:start
order WebSite-after-WebFS inf: WebFS WebSite
order apache-after-ip Mandatory: ClusterIP WebSite
property cib-bootstrap-options: \
        dc-version=1.1.10-14.el6_5.3-368c726 \
        cluster-infrastructure=cman \
        stonith-enabled=false \
        no-quorum-policy=ignore
rsc_defaults rsc_defaults-options: \
        migration-threshold=1

What am I doing wrong?

On Tue, Oct 28, 2014 at 5:11 PM, Andrew Beekhof <andrew at beekhof.net> wrote:

>
> > On 28 Oct 2014, at 6:26 pm, Sihan Goi <goister at gmail.com> wrote:
> >
> > Hi,
> >
> > No, I did not do this. I followed the Pacemaker 1.1 - Clusters from
> scratch edition 5 for Fedora 13, and in section 7.3.4 it instructed me to
> run the following commands, which I did:
> > mkfs.ext4 /dev/drbd1
> > mount /dev/drbd1 /mnt
> > create index.html file in /mnt
> > umount /dev/drbd1
> >
> > Subsequently, after unmounting, there were no further instructions to
> mount any other directories.
> >
> > So, how should I mount /dev/mapper/vg_node02-drbd--demo to
> /var/www/html? Should I be mounting /dev/mapper/vg_node02-drbd--demo, or
> /dev/drbd1. Since I've already created index.html in /dev/drbd1, should I
> be mounting that? I'm a little confused here.
>
>
> http://clusterlabs.org/doc/en-US/Pacemaker/1.1-plugin/html/Clusters_from_Scratch/_configure_the_cluster_for_drbd.html
>
> Look for "Now that DRBD is functioning we can configure a Filesystem
> resource to use it"
>
> >
> > On Tue, Oct 28, 2014 at 11:41 AM, Andrew Beekhof <andrew at beekhof.net>
> wrote:
> >
> > > On 27 Oct 2014, at 6:05 pm, Sihan Goi <goister at gmail.com> wrote:
> > >
> > > Hi,
> > >
> > > That offending line is as follows:
> > > DocumentRoot "/var/www/html"
> > >
> > > I'm guessing it needs to be updated to the DRBD block device, but I'm
> not sure how to do that, or even what the block device is.
> > >
> > > fdisk -l shows the following, which I'm guessing is the block device?
> > > /dev/mapper/vg_node02-drbd--demo
> > >
> > > lvs shows the following:
> > > drbd-demo vg_node02 -wi-ao----  1.00g
> > >
> > > btw I'm running the commands on node02 (secondary) rather than node01
> (primary). It's just a matter of convenience due to the physical location
> of the machine. Does it matter?
> >
> > Um, you need to mount /dev/mapper/vg_node02-drbd--demo to /var/www/html
> with a FileSystem resource.
> > Have you not done this?
> >
> > >
> > > Thanks.
> > >
> > > On Mon, Oct 27, 2014 at 11:35 AM, Andrew Beekhof <andrew at beekhof.net>
> wrote:
> > > Oct 27 10:28:44 node02 apache(WebSite)[10515]: ERROR: Syntax error on
> line 292 of /etc/httpd/conf/httpd.conf: DocumentRoot must be a directory
> > >
> > >
> > >
> > > > On 27 Oct 2014, at 1:36 pm, Sihan Goi <goister at gmail.com> wrote:
> > > >
> > > > Hi Andrew,
> > > >
> > > > Logs in /var/log/httpd/ are empty, but here's a snippet of
> /var/log/messages right after I start pacemaker and do a "crm status"
> > > >
> > > > http://pastebin.com/ivQdyV4u
> > > >
> > > > Seems like the Apache service doesn't come up. This only happens
> after I run the commands in the guide to configure DRBD.
> > > >
> > > > On Fri, Oct 24, 2014 at 8:29 AM, Andrew Beekhof <andrew at beekhof.net>
> wrote:
> > > > logs?
> > > >
> > > > > On 23 Oct 2014, at 1:08 pm, Sihan Goi <goister at gmail.com> wrote:
> > > > >
> > > > > Hi, can anyone help? Really stuck here...
> > > > >
> > > > > On Mon, Oct 20, 2014 at 9:46 AM, Sihan Goi <goister at gmail.com>
> wrote:
> > > > > Hi,
> > > > >
> > > > > I'm following the "Clusters from Scratch" guide for Fedora 13, and
> I've managed to get a 2 node cluster working with Apache. However, once I
> tried to add DRBD 8.4 to the mix, it stopped working.
> > > > >
> > > > > I've followed the DRBD steps in the guide all the way till "cib
> commit fs" in Section 7.4, right before "Testing Migration". However, when
> I do a crm_mon, I get the following "failed actions".
> > > > >
> > > > > Last updated: Thu Oct 16 17:28:34 2014
> > > > > Last change: Thu Oct 16 17:26:04 2014 via crm_shadow on node01
> > > > > Stack: cman
> > > > > Current DC: node02 - partition with quorum
> > > > > Version: 1.1.10-14.el6_5.3-368c726
> > > > > 2 Nodes configured
> > > > > 5 Resources configured
> > > > >
> > > > >
> > > > > Online: [ node01 node02 ]
> > > > >
> > > > > ClusterIP    (ocf::heartbeat:IPaddr2):    Started node02
> > > > >  Master/Slave Set: WebDataClone [WebData]
> > > > >      Masters: [ node02 ]
> > > > >      Slaves: [ node01 ]
> > > > > WebFS   (ocf::heartbeat:Filesystem):    Started node02
> > > > >
> > > > > Failed actions:
> > > > >     WebSite_start_0 on node02 'unknown error' (1): call=278,
> status=Timed Out, last-rc-change='Thu Oct 16 17:26:28 2014',
> queued=20000ms, exec=0ms
> > > > >     WebSite_start_0 on node01 'unknown error' (1): call=203,
> status=Timed
> > > > > Out, last-rc-change='Thu Oct 16 17:26:09 2014', queued=20000ms,
> exec=0ms
> > > > >
> > > > > Seems like the apache Website resource isn't starting up. Apache
> was
> > > > > working just fine before I configured DRBD. What did I do wrong?
> > > > >
> > > > > --
> > > > > - Goi Sihan
> > > > > goister at gmail.com
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > - Goi Sihan
> > > > > goister at gmail.com
> > > > > _______________________________________________
> > > > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > > >
> > > > > Project Home: http://www.clusterlabs.org
> > > > > Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > > > Bugs: http://bugs.clusterlabs.org
> > > >
> > > >
> > > > _______________________________________________
> > > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > >
> > > > Project Home: http://www.clusterlabs.org
> > > > Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > > Bugs: http://bugs.clusterlabs.org
> > > >
> > > >
> > > >
> > > > --
> > > > - Goi Sihan
> > > > goister at gmail.com
> > > > _______________________________________________
> > > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > >
> > > > Project Home: http://www.clusterlabs.org
> > > > Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > > Bugs: http://bugs.clusterlabs.org
> > >
> > >
> > > _______________________________________________
> > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > >
> > > Project Home: http://www.clusterlabs.org
> > > Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > Bugs: http://bugs.clusterlabs.org
> > >
> > >
> > >
> > > --
> > > - Goi Sihan
> > > goister at gmail.com
> > > _______________________________________________
> > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > >
> > > Project Home: http://www.clusterlabs.org
> > > Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > Bugs: http://bugs.clusterlabs.org
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
> >
> >
> >
> > --
> > - Goi Sihan
> > goister at gmail.com
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>



-- 
- Goi Sihan
goister at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20141028/b19d510d/attachment.htm>


More information about the Pacemaker mailing list