[Pacemaker] Don't want to stop lsb resource on migration

Bingham knee-jerk-reaction at hotmail.com
Mon Mar 24 19:14:54 UTC 2014


Greetings,
I am getting closer to what I need. 
I am having trouble figuring out a rule for p_VIPeth1_1 that will cause it's score to be -inf if p_R_NODE1 is not running.Here is the rule that I am struggling with. 
location p_VIPeth1_1_loc2 p_VIPeth1_1 \	rule $id="p_VIPeth1_1_loc2-rule" -inf: p_R_NODE1 eq Stopped

\/ The entire config so far is below \/
root at clust1:~# crm configure shownode $id="404ea40c-f92d-4649-869d-41beaf261d87" clust1 \	attributes standby="off"node $id="ae33be72-ccbb-4f54-859f-fd400efeb60b" clust2 \	attributes standby="off"primitive p_PINGDB ocf:pacemaker:ping \	params host_list="192.168.254.42" name="p_PINGDB" \	op monitor interval="15s" timeout="5s"primitive p_R_NODE1 lsb:rabbitmq-server \	op monitor interval="15s" timeout="15s" \	meta target-role="Started" is-managed="true"primitive p_R_NODE2 lsb:rabbitmq-server \	op monitor interval="15s" timeout="15s" \	meta target-role="Started"primitive p_VIPeth1_1 ocf:heartbeat:IPaddr \	params ip="192.168.254.78" cidr_netmask="255.255.255.0" nic="eth1" \	op monitor interval="40s" timeout="20s" \	meta target-role="Started" is-managed="true"clone p_PINGDB_clone p_PINGDBlocation cli-standby-p_R_NODE1 p_R_NODE1 \	rule $id="cli-standby-rule-p_R_NODE1" -inf: #uname eq clust2location p_R_NODE1_loc p_R_NODE1 -inf: clust2location p_R_NODE1_pref p_R_NODE1 inf: clust1location p_R_NODE2_loc p_R_NODE2 -inf: clust1location p_R_NODE2_pref p_R_NODE2 inf: clust2location p_VIPeth1_1_loc p_VIPeth1_1 \	rule $id="p_VIPeth1_1_loc-rule" -inf: p_PINGDB lte 0location p_VIPeth1_1_loc2 p_VIPeth1_1 \	rule $id="p_VIPeth1_1_loc2-rule" -inf: p_R_NODE1 eq Stoppedproperty $id="cib-bootstrap-options" \	dc-version="1.1.6-9971ebba4494012a93c03b40a2c58ec0eb60f50c" \	cluster-infrastructure="Heartbeat" \	stonith-enabled="false" \	default-action-timeout="120" \	last-lrm-refresh="1395671783"root at clust1:~# 

Thanks, Steve


From: andrew at beekhof.net
Date: Wed, 19 Mar 2014 09:37:43 +1100
To: pacemaker at oss.clusterlabs.org
Subject: Re: [Pacemaker] Don't want to stop lsb resource on migration

 
On 19 Mar 2014, at 6:56 am, Bingham <knee-jerk-reaction at hotmail.com> wrote:
 
> 
> My problem is that I need to have rabbitmq running on both node1 and node2.
> I also need the IP to fail over if rabbitmq were to fail on the current node.
> 
> The 2 rabbitmq services are communicating with each other. 
> Data is pushed to the clients. 
> 
> Even though the IP may currently live on node1, data may flow through node1 then through node2 (via rabbit) and out to client.
> 
>                        Rnode1 -------> client1
>                      /     /|\
> DB---->VIP         |
>                            \|/
>                       Rnode2 --------> client2
> 
> 
> 
> Maybe I should not have these resources grouped together since that implies collocation infinity for IP and rabbitmq?
 
Correct. It also sounds like rabbitmq should be a master/slave resource
 
> 
> 
> Steve
> 
> 
> From: andrew at beekhof.net
> Date: Tue, 18 Mar 2014 11:44:34 +1100
> To: pacemaker at oss.clusterlabs.org
> Subject: Re: [Pacemaker] Don't want to stop lsb resource on migration
> 
>  
> On 14 Mar 2014, at 1:00 am, Bingham <knee-jerk-reaction at hotmail.com> wrote:
>  
> > Hello,
> > 
> > My setup:
> >          I have a 2 node cluster using pacemaker and heartbeat. I have 2 resources, ocf::heartbeat:IPaddr and lsb:rabbitmq-server.       
> >          I have these 2 resources grouped together and they will fail over to the other node.
> > 
> > 
> > 
> > question:
> >          When rabbitmq is migrated to node1 from node2 I would like to 'not' have the the </etc/init.d/rabbitmq-server stop> happen on the failed server (node1 in this example).
>  
> 'migrate' has special meaning here.
> After a failure rabbitmq is moved (stopped on the old node and started on the new one), which is different from a migration.
>  
> Leaving rabbitmq in an unclean state on node1 would definitely not be a good idea.
>  
> > 
> >           Is it possible to do this in crm? 
> >  
> >          I realize that I could hack the initscript's case statement for stop to just "exit 0", but I am hoping there is a way to do this in crm.
> > 
> >   
> > Thanks for any help,
> > Steve
> >           
> > 
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > 
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
>  
> 
> _______________________________________________ Pacemaker mailing list: Pacemaker at oss.clusterlabs.org http://oss.clusterlabs.org/mailman/listinfo/pacemaker Project Home: http://www.clusterlabs.org Getting started:http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
 

_______________________________________________
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker

Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20140324/1fe74f4e/attachment.htm>


More information about the Pacemaker mailing list