[Pacemaker] Pacemaker/corosync freeze

Andrew Beekhof andrew at beekhof.net
Tue Mar 11 21:27:08 UTC 2014


On 12 Mar 2014, at 1:54 am, Attila Megyeri <amegyeri at minerva-soft.com> wrote:

>> 
>> -----Original Message-----
>> From: Andrew Beekhof [mailto:andrew at beekhof.net]
>> Sent: Tuesday, March 11, 2014 12:48 AM
>> To: The Pacemaker cluster resource manager
>> Subject: Re: [Pacemaker] Pacemaker/corosync freeze
>> 
>> 
>> On 7 Mar 2014, at 5:54 pm, Attila Megyeri <amegyeri at minerva-soft.com>
>> wrote:
>> 
>>> Thanks for the quick response!
>>> 
>>>> -----Original Message-----
>>>> From: Andrew Beekhof [mailto:andrew at beekhof.net]
>>>> Sent: Friday, March 07, 2014 3:48 AM
>>>> To: The Pacemaker cluster resource manager
>>>> Subject: Re: [Pacemaker] Pacemaker/corosync freeze
>>>> 
>>>> 
>>>> On 7 Mar 2014, at 5:31 am, Attila Megyeri <amegyeri at minerva-soft.com>
>>>> wrote:
>>>> 
>>>>> Hello,
>>>>> 
>>>>> We have a strange issue with Corosync/Pacemaker.
>>>>> From time to time, something unexpected happens and suddenly the
>>>> crm_mon output remains static.
>>>>> When I check the cpu usage, I see that one of the cores uses 100%
>>>>> cpu, but
>>>> cannot actually match it to either the corosync or one of the
>>>> pacemaker processes.
>>>>> 
>>>>> In such a case, this high CPU usage is happening on all 7 nodes.
>>>>> I have to manually go to each node, stop pacemaker, restart
>>>>> corosync, then
>>>> start pacemeker. Stoping pacemaker and corosync does not work in most
>>>> of the cases, usually a kill -9 is needed.
>>>>> 
>>>>> Using corosync 2.3.0, pacemaker 1.1.10 on Ubuntu trusty.
>>>>> 
>>>>> Using udpu as transport, two rings on Gigabit ETH, rro_mode passive.
>>>>> 
>>>>> Logs are usually flooded with CPG related messages, such as:
>>>>> 
>>>>> Mar 06 18:10:49 [1316] ctsip1       crmd:     info: crm_cs_flush:       Sent 0
>> CPG
>>>> messages  (1 remaining, last=8): Try again (6)
>>>>> Mar 06 18:10:49 [1316] ctsip1       crmd:     info: crm_cs_flush:       Sent 0
>> CPG
>>>> messages  (1 remaining, last=8): Try again (6)
>>>>> Mar 06 18:10:50 [1316] ctsip1       crmd:     info: crm_cs_flush:       Sent 0
>> CPG
>>>> messages  (1 remaining, last=8): Try again (6)
>>>>> Mar 06 18:10:50 [1316] ctsip1       crmd:     info: crm_cs_flush:       Sent 0
>> CPG
>>>> messages  (1 remaining, last=8): Try again (6)
>>>>> 
>>>>> OR
>>>>> 
>>>>> Mar 06 17:46:24 [1341] ctdb1        cib:     info: crm_cs_flush:        Sent 0 CPG
>>>> messages  (1 remaining, last=10933): Try again (
>>>>> Mar 06 17:46:24 [1341] ctdb1        cib:     info: crm_cs_flush:        Sent 0 CPG
>>>> messages  (1 remaining, last=10933): Try again (
>>>>> Mar 06 17:46:24 [1341] ctdb1        cib:     info: crm_cs_flush:        Sent 0 CPG
>>>> messages  (1 remaining, last=10933): Try again (
>>>> 
>>>> That is usually a symptom of corosync getting into a horribly confused
>> state.
>>>> Version? Distro? Have you checked for an update?
>>>> Odd that the user of all that CPU isn't showing up though.
>>>> 
>>>>> 
>>> 
>>> As I wrote I use Ubuntu trusty, the exact package versions are:
>>> 
>>> corosync 2.3.0-1ubuntu5
>>> pacemaker 1.1.10+git20130802-1ubuntu2
>> 
>> Ah sorry, I seem to have missed that part.
>> 
>>> 
>>> There are no updates available. The only option is to install from sources,
>> but that would be very difficult to maintain and I'm not sure I would get rid of
>> this issue.
>>> 
>>> What do you recommend?
>> 
>> The same thing as Lars, or switch to a distro that stays current with upstream
>> (git shows 5 newer releases for that branch since it was released 3 years
>> ago).
>> If you do build from source, its probably best to go with v1.4.6
> 
> Hm, I am a bit confused here. We are using 2.3.0,

I swapped the 2 for a 1 somehow. A bit distracted, sorry.

> which was released approx. a year ago (you mention 3 years) and you recommend 1.4.6, which is a rather old version.
> Could you please clarify a bit? :)
> Lars recommends 2.3.3 git tree.
> 
> I might end up trying both, but just want to make sure I am not misunderstanding something badly.
> 
> Thank you!
> 
> 
> 
> 
> 
> 
> 
> 
>> 
>>> 
>>> 
>>>>> 
>>>>> HTOP show something like this (sorted by TIME+ descending):
>>>>> 
>>>>> 
>>>>> 
>>>>> 1  [||||||||||||||||||||||||||||||||||||||||100.0%]     Tasks: 59, 4
>>>> thr; 2 running
>>>>> 2  [|                                         0.7%]     Load average: 1.00 0.99 1.02
>>>>> Mem[||||||||||||||||||||||||||||||||     165/994MB]     Uptime: 1
>>>> day, 10:22:03
>>>>> Swp[                                       0/509MB]
>>>>> 
>>>>> PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
>>>>> 921 root       20   0  188M 49220 33856 R  0.0  4.8  3h33:58
>> /usr/sbin/corosync
>>>>> 1277 snmp       20   0 45708  4248  1472 S  0.0  0.4  1:33.07 /usr/sbin/snmpd
>> -
>>>> Lsd -Lf /dev/null -u snmp -g snm
>>>>> 1311 hacluster  20   0  109M 16160  9640 S  0.0  1.6  1:12.71
>>>> /usr/lib/pacemaker/cib
>>>>> 1312 root       20   0  104M  7484  3780 S  0.0  0.7  0:38.06
>>>> /usr/lib/pacemaker/stonithd
>>>>> 1611 root       -2   0  4408  2356  2000 S  0.0  0.2  0:24.15 /usr/sbin/watchdog
>>>>> 1316 hacluster  20   0  122M  9756  5924 S  0.0  1.0  0:22.62
>>>> /usr/lib/pacemaker/crmd
>>>>> 1313 root       20   0 81784  3800  2876 S  0.0  0.4  0:18.64
>>>> /usr/lib/pacemaker/lrmd
>>>>> 1314 hacluster  20   0 96616  4132  2604 S  0.0  0.4  0:16.01
>>>> /usr/lib/pacemaker/attrd
>>>>> 1309 root       20   0  104M  4804  2580 S  0.0  0.5  0:15.56 pacemakerd
>>>>> 1250 root       20   0 33000  1192   928 S  0.0  0.1  0:13.59 ha_logd: read
>> process
>>>>> 1315 hacluster  20   0 73892  2652  1952 S  0.0  0.3  0:13.25
>>>> /usr/lib/pacemaker/pengine
>>>>> 1252 root       20   0 33000   712   456 S  0.0  0.1  0:13.03 ha_logd: write
>> process
>>>>> 1835 ntp        20   0 27216  1980  1408 S  0.0  0.2  0:11.80 /usr/sbin/ntpd -p
>>>> /var/run/ntpd.pid -g -u 105:112
>>>>> 899 root       20   0 19168   700   488 S  0.0  0.1  0:09.75 /usr/sbin/irqbalance
>>>>> 1642 root       20   0 30696  1556   912 S  0.0  0.2  0:06.49 /usr/bin/monit -c
>>>> /etc/monit/monitrc
>>>>> 4374 kamailio   20   0  291M  7272  2188 S  0.0  0.7  0:02.77
>>>> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
>>>>> 3079 root        0 -20 16864  4592  3508 S  0.0  0.5  0:01.51 /usr/bin/atop -a -
>> w
>>>> /var/log/atop/atop_20140306 6
>>>>> 445 syslog     20   0  249M  6276   976 S  0.0  0.6  0:01.16 rsyslogd
>>>>> 4373 kamailio   20   0  291M  7492  2396 S  0.0  0.7  0:01.03
>>>> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
>>>>>   1 root       20   0 33376  2632  1404 S  0.0  0.3  0:00.63 /sbin/init
>>>>> 453 syslog     20   0  249M  6276   976 S  0.0  0.6  0:00.63 rsyslogd
>>>>> 451 syslog     20   0  249M  6276   976 S  0.0  0.6  0:00.53 rsyslogd
>>>>> 4379 kamailio   20   0  291M  6224  1132 S  0.0  0.6  0:00.38
>>>> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
>>>>> 4380 kamailio   20   0  291M  8516  3084 S  0.0  0.8  0:00.38
>>>> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
>>>>> 4381 kamailio   20   0  291M  8252  2828 S  0.0  0.8  0:00.37
>>>> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
>>>>> 23315 root       20   0 24872  2476  1412 R  0.7  0.2  0:00.37 htop
>>>>> 4367 kamailio   20   0  291M 10000  4864 S  0.0  1.0  0:00.36
>>>> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
>>>>> 
>>>>> 
>>>>> My questions:
>>>>> -   Is this a cororync or pacameker issue?
>>>>> -   What are the CPG messages? Is it possible that we have a firewall
>> issue?
>>>>> 
>>>>> 
>>>>> Any hints would be great!
>>>>> 
>>>>> Thanks,
>>>>> Attila
>>>>> _______________________________________________
>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>> 
>>>>> Project Home: http://www.clusterlabs.org Getting started:
>>>>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>> Bugs: http://bugs.clusterlabs.org
>>> 
>>> 
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>> 
>>> Project Home: http://www.clusterlabs.org Getting started:
>>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
> 
> 
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 841 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20140312/c2b81f8b/attachment-0004.sig>


More information about the Pacemaker mailing list