[Pacemaker] CMAN and Pacemaker with IPv6

Teerapatr Kittiratanachai maillist.tk at gmail.com
Thu Jul 10 03:35:54 UTC 2014


OK, some problems are solved.
I use the incorrect hostname.

For now, the new problem has occured.

  Starting cman... Node address family does not match multicast address family
Unable to get the configuration
Node address family does not match multicast address family
cman_tool: corosync daemon didn't start Check cluster logs for details
                                                           [FAILED]

How can i fix it? Or just assigned the multicast address in the configuration?

Regards,
Te

On Thu, Jul 10, 2014 at 7:52 AM, Teerapatr Kittiratanachai
<maillist.tk at gmail.com> wrote:
> I not found any LOG message
>
> /var/log/messages
> ...
> Jul 10 07:44:19 nwh00 kernel: : DLM (built Jun 19 2014 21:16:01) installed
> Jul 10 07:44:22 nwh00 pacemaker: Aborting startup of Pacemaker Cluster Manager
> ...
>
> and this is what display when I try to start pacemaker
>
> # /etc/init.d/pacemaker start
> Starting cluster:
>    Checking if cluster has been disabled at boot...        [  OK  ]
>    Checking Network Manager...                             [  OK  ]
>    Global setup...                                         [  OK  ]
>    Loading kernel modules...                               [  OK  ]
>    Mounting configfs...                                    [  OK  ]
>    Starting cman... Cannot find node name in cluster.conf
> Unable to get the configuration
> Cannot find node name in cluster.conf
> cman_tool: corosync daemon didn't start Check cluster logs for details
>                                                            [FAILED]
> Stopping cluster:
>    Leaving fence domain...                                 [  OK  ]
>    Stopping gfs_controld...                                [  OK  ]
>    Stopping dlm_controld...                                [  OK  ]
>    Stopping fenced...                                      [  OK  ]
>    Stopping cman...                                        [  OK  ]
>    Unloading kernel modules...                             [  OK  ]
>    Unmounting configfs...                                  [  OK  ]
> Aborting startup of Pacemaker Cluster Manager
>
> another one thing, according to the happened problem, I remove the
> AAAA record from DNS for now and map it in to /etc/hosts files
> instead, as shown below.
>
> /etc/hosts
> ...
> 2001:db8:0:1::1   node0.example.com
> 2001:db8:0:1::2   node1.example.com
> ...
>
> Is there any configure that help me to got more log ?
>
> On Thu, Jul 10, 2014 at 5:06 AM, Andrew Beekhof <andrew at beekhof.net> wrote:
>>
>> On 9 Jul 2014, at 9:15 pm, Teerapatr Kittiratanachai <maillist.tk at gmail.com> wrote:
>>
>>> Dear All,
>>>
>>> I has implemented the HA on dual stack servers,
>>> Firstly, I doesn't deploy IPv6 record on DNS yet. The CMAN and
>>> PACEMAKER can work as normal.
>>> But, after I create AAAA record on DNS server, i found the error that
>>> cann't start CMAN.
>>>
>>> Are CMAN and PACEMAKER  support the IPv6?
>>
>> I don;t think pacemaker cares.
>> What errors did you get?
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>




More information about the Pacemaker mailing list