[Pacemaker] A resource starts with a standby node.(Latest attrd does not serve as the crmd-transition-delay parameter)

renayama19661014 at ybb.ne.jp renayama19661014 at ybb.ne.jp
Thu Jan 30 23:57:46 UTC 2014


Hi Andrew,

It became late.
I registered this problem by Bugzilla.
The report file is attached, too.

 * http://bugs.clusterlabs.org/show_bug.cgi?id=5194

Best Regards,
Hideo Yamauchi.

--- On Tue, 2014/1/14, Andrew Beekhof <andrew at beekhof.net> wrote:

> 
> On 14 Jan 2014, at 4:33 pm, renayama19661014 at ybb.ne.jp wrote:
> 
> > Hi Andrew,
> > 
> >>>> Are you using the new attrd code or the legacy stuff?
> >>> 
> >>> I use new attrd.
> >> 
> >> And the values are not being sent to the cib at the same time? 
> > 
> > As far as I looked. . .
> > When the transmission of the attribute of attrd of the node was late, a leader of attrd seemed to send an attribute to cib without waiting for it.
> 
> And you have a delay configured?  And this value was set prior to that delay expiring?
> 
> > 
> >>>> Only the new code makes (or at least should do) crmd-transition-delay redundant.
> >>> 
> >>> It did not seem to work so that new attrd dispensed with crmd-transition-delay to me.
> >>> I report the details again.
> >>> # Probably it will be Bugzilla. . .
> >> 
> >> Sounds good
> > 
> > All right!
> > 
> > Many Thanks!
> > Hideo Yamauch.
> > 
> > --- On Tue, 2014/1/14, Andrew Beekhof <andrew at beekhof.net> wrote:
> > 
> >> 
> >> On 14 Jan 2014, at 4:13 pm, renayama19661014 at ybb.ne.jp wrote:
> >> 
> >>> Hi Andrew,
> >>> 
> >>> Thank you for comments.
> >>> 
> >>>> Are you using the new attrd code or the legacy stuff?
> >>> 
> >>> I use new attrd.
> >> 
> >> And the values are not being sent to the cib at the same time? 
> >> 
> >>> 
> >>>> 
> >>>> If you're not using corosync 2.x or see:
> >>>> 
> >>>>      crm_notice("Starting mainloop...");
> >>>> 
> >>>> then its the old code.  The new code could also be used with CMAN but isn't configured to build for in that situation.
> >>>> 
> >>>> Only the new code makes (or at least should do) crmd-transition-delay redundant.
> >>> 
> >>> It did not seem to work so that new attrd dispensed with crmd-transition-delay to me.
> >>> I report the details again.
> >>> # Probably it will be Bugzilla. . .
> >> 
> >> Sounds good
> >> 
> >>> 
> >>> Best Regards,
> >>> Hideo Yamauchi.
> >>> 
> >>> --- On Tue, 2014/1/14, Andrew Beekhof <andrew at beekhof.net> wrote:
> >>> 
> >>>> 
> >>>> On 14 Jan 2014, at 3:52 pm, renayama19661014 at ybb.ne.jp wrote:
> >>>> 
> >>>>> Hi All,
> >>>>> 
> >>>>> I contributed next bugzilla by a problem to occur for the difference of the timing of the attribute update by attrd before.
> >>>>> * https://developerbugs.linuxfoundation.org/show_bug.cgi?id=2528
> >>>>> 
> >>>>> We can evade this problem now by using crmd-transition-delay parameter.
> >>>>> 
> >>>>> I confirmed whether I could evade this problem by renewed attrd recently.
> >>>>> * In latest attrd, one became a leader and seemed to come to update an attribute.
> >>>>> 
> >>>>> However, latest attrd does not seem to substitute for crmd-transition-delay.
> >>>>> * I contribute detailed log later.
> >>>>> 
> >>>>> We are dissatisfied with continuing using crmd-transition-delay.
> >>>>> Is there the plan when attrd handles this problem well in the future?
> >>>> 
> >>>> Are you using the new attrd code or the legacy stuff?
> >>>> 
> >>>> If you're not using corosync 2.x or see:
> >>>> 
> >>>>      crm_notice("Starting mainloop...");
> >>>> 
> >>>> then its the old code.  The new code could also be used with CMAN but isn't configured to build for in that situation.
> >>>> 
> >>>> Only the new code makes (or at least should do) crmd-transition-delay redundant.
> >>>> 
> >> 
> >> 
> 
> 




More information about the Pacemaker mailing list