[Pacemaker] A resource starts with a standby node.(Latest attrd does not serve as the crmd-transition-delay parameter)

Andrew Beekhof andrew at beekhof.net
Tue Jan 14 05:24:09 UTC 2014


On 14 Jan 2014, at 4:13 pm, renayama19661014 at ybb.ne.jp wrote:

> Hi Andrew,
> 
> Thank you for comments.
> 
>> Are you using the new attrd code or the legacy stuff?
> 
> I use new attrd.

And the values are not being sent to the cib at the same time? 

> 
>> 
>> If you're not using corosync 2.x or see:
>> 
>>     crm_notice("Starting mainloop...");
>> 
>> then its the old code.  The new code could also be used with CMAN but isn't configured to build for in that situation.
>> 
>> Only the new code makes (or at least should do) crmd-transition-delay redundant.
> 
> It did not seem to work so that new attrd dispensed with crmd-transition-delay to me.
> I report the details again.
> # Probably it will be Bugzilla. . .

Sounds good

> 
> Best Regards,
> Hideo Yamauchi.
> 
> --- On Tue, 2014/1/14, Andrew Beekhof <andrew at beekhof.net> wrote:
> 
>> 
>> On 14 Jan 2014, at 3:52 pm, renayama19661014 at ybb.ne.jp wrote:
>> 
>>> Hi All,
>>> 
>>> I contributed next bugzilla by a problem to occur for the difference of the timing of the attribute update by attrd before.
>>> * https://developerbugs.linuxfoundation.org/show_bug.cgi?id=2528
>>> 
>>> We can evade this problem now by using crmd-transition-delay parameter.
>>> 
>>> I confirmed whether I could evade this problem by renewed attrd recently.
>>> * In latest attrd, one became a leader and seemed to come to update an attribute.
>>> 
>>> However, latest attrd does not seem to substitute for crmd-transition-delay.
>>> * I contribute detailed log later.
>>> 
>>> We are dissatisfied with continuing using crmd-transition-delay.
>>> Is there the plan when attrd handles this problem well in the future?
>> 
>> Are you using the new attrd code or the legacy stuff?
>> 
>> If you're not using corosync 2.x or see:
>> 
>>     crm_notice("Starting mainloop...");
>> 
>> then its the old code.  The new code could also be used with CMAN but isn't configured to build for in that situation.
>> 
>> Only the new code makes (or at least should do) crmd-transition-delay redundant.
>> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 841 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20140114/f71c5409/attachment-0004.sig>


More information about the Pacemaker mailing list