[Pacemaker] node1 fencing itself after node2 being fenced

Nikita Staroverov nsforth at gmail.com
Tue Feb 18 11:07:54 UTC 2014


18.02.2014 14:12, Asgaroth пишет:
>> The 3rd node should (and needs to be) fenced at this point to allow the
>> cluster to continue.
>> Is this not happening?
> The fencing operation appears to complete successfully, here is the
> sequence:
>
> [1] All 3 nodes running properly
> [2] On node 3 I run "echo c > /proc/sysrq-trigger" which "hangs" node3
> [3] The fence_test03 resources executes a fence operation on node 3 (fires a
> shutdown/startup on the vm)
> [4] dlm shows kern_stop state while node 3 is being fenced
> [5] node 3 reboots, and node 1 & 2 operate as normal (clvmd and gfs2 work
> properly, dlm notified that fence successful (2 members in each lock group))
> [6] While node 3 is booting, cman starts properly then clvmd starts but
> hangs on boot
> [7] While node 3 is "hung" at the clvmd stage, node 1 & 2 are unable to
> perform lvm operations due to node 3 attempting to join the clvmd "group".
> Dlm shows that node 3 is a member, cman sees node 3 as a cluster member,
> however, pacemaker has not started as clvmd is not successfully started.
>
i sometimes have the same situation. sleep ~30 seconds between startup 
cman and clvmd helps a lot.




More information about the Pacemaker mailing list