[Pacemaker] Multicast pitfalls? corosync [TOTEM ] Retransmit List:

[Stefan Bauer]

that is caused by tcp offloading features in virtual machines network hw. google for it.

Mit freundlichen Grüßen

Stefan Bauer
-- 
Cubewerk GmbH
Herzog-Otto-Straße 32
83308 Trostberg
08621 - 99 60 237
HRB 22195 AG Traunstein
GF Stefan Bauer

Am 14.02.2014 um 08:56 schrieb "Beo Banks" <beo.banks at googlemail.com <mailto:beo.banks at googlemail.com> >:

hi
  [bad udp cksum fa38!] 
 is that a normal?
  node 1 
  tcpdump -envv "port 5405" -i eth1 
tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes
08:46:01.230420 52:54:00:09:ef:2f > 52:54:00:ba:8a:1c, ethertype IPv4 (0x0800), length 149: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 135)
    10.0.0.21.hpoms-dps-lstn > 10.0.0.22.netsupport: [bad udp cksum fa38!] UDP, length 107
08:46:01.440315 52:54:00:09:ef:2f > 01:00:5e:5e:01:01, ethertype IPv4 (0x0800), length 161: (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto UDP (17), length 147)
    10.0.0.21.hpoms-dps-lstn > 226.94.1.1.netsupport: [bad udp cksum 7339!] UDP, length 119
08:46:02.015321 52:54:00:ba:8a:1c > 52:54:00:09:ef:2f, ethertype IPv4 (0x0800), length 149: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 135)
    10.0.0.22.hpoms-dps-lstn > 10.0.0.21.netsupport: [udp sum ok] UDP, length 10


2014-02-13 19:37 GMT+01:00 Digimer <lists at alteeve.ca <mailto:lists at alteeve.ca> >:
On 13/02/14 12:01 PM, Beo Banks wrote:
hi thanks...for your help.
i have two node cluster
both node are running on seperate hosts.
the 2x hosts have 2 nic's ....eth0 is 172.XXX...whatever and eth1 is
direct connection (crossover cable) between the hosts.
the issue must be my kvm host,or?

What kind of bridging are you using? Standard NAT'ed virbr0 bridges? If so, can you/have you tried using traditional bridging? That should turn the bridge into more of a traditional switch instead of relying on packet routing... I've had no trouble with VM clusters, but I only ever tested with both VMs on the same host.

Here's how I build my bridges:

https://alteeve.ca/w/AN!Cluster_Tutorial_2#Configuring_our_Bridge.2C_Bonds_and_Interfaces

Of course, you could create a stand-alone bridge and use brctl to attach the real interface instead of modifying the network config, if you just want to test. Once the bridge is built, simple adjust the VM's config to use the new bridge. If that works well, then you could consider a more permanent config.

-- 
Digimer
Papers and Projects: https://alteeve.ca/w/
What if the cure for cancer is trapped in the mind of a person without access to education?


_______________________________________________
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org <mailto:Pacemaker at oss.clusterlabs.org> 
http://oss.clusterlabs.org/mailman/listinfo/pacemaker <http://oss.clusterlabs.org/mailman/listinfo/pacemaker> 

Project Home: http://www.clusterlabs.org <http://www.clusterlabs.org> 
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf <http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf> 
Bugs: http://bugs.clusterlabs.org <http://bugs.clusterlabs.org> 


_______________________________________________

Pacemaker mailing list: Pacemaker at oss.clusterlabs.org <mailto:Pacemaker at oss.clusterlabs.org> 

http://oss.clusterlabs.org/mailman/listinfo/pacemaker <http://oss.clusterlabs.org/mailman/listinfo/pacemaker> 



Project Home: http://www.clusterlabs.org <http://www.clusterlabs.org> 

Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf <http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf> 

Bugs: http://bugs.clusterlabs.org <http://bugs.clusterlabs.org> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20140214/2dcae007/attachment.htm>