[Pacemaker] Fwd: Re: drbd / libvirt / Pacemaker Cluster?

Heiner Meier linuxforums at erwo.net
Tue Dec 2 10:04:08 UTC 2014


Hello,

ok i have configured it in pacemaker / crm

Since the config has stonith/fencing it has many problems,
after reboot the nodes are unclean and so on, i need an
automatic Hot Standby...

When i power off the master box - the slave resources dont came up,
the slave always says then the master is "online" - but the machine
is powered off...

---

Logs that may be interesting:
master corosync[1350]:   [QUORUM] This node is within the non-primary
component and will NOT provide any services.
master warning: do_state_transition: Only 1 of 2 cluster nodes are
eligible to run resources - continue 0
notice: pcmk_quorum_notification: Membership 900: quorum lost (1)
notice: crm_update_peer_state: pcmk_quorum_notification: Node
slave[1084777474] - state is now lost (was member)
notice: stonith_device_register: Added 'st-null:0' to the device list (2
active devices)

---

The config is now (why there are that many "^O" ? I never wrote
them, but the crm shell works.)

node^O $id="1084777473" ^Omaster^O \
        attributes^O standby^O="off^O" maintenance^O="off^O"
node^O $id="1084777474" ^Oslave^O \
        attributes^O maintenance^O="off^O" standby^O="off^O"
primitive^O ^Olibvirt^O upstart:libvirt-bin \
        op^O start timeout^O="120s^O" interval^O="0^O" \
        op^O stop timeout^O="120s^O" interval^O="0^O" \
        op^O monitor interval^O="30s^O" \
        meta^O target-role^O="Stopped^O"
primitive^O ^Ost-null^O stonith:null \
        params^O hostlist^O="master slave^O"
primitive^O ^Ovmdata^O ocf:linbit:drbd \
        params^O drbd_resource^O="vmdata^O" \
        op^O monitor interval^O="29s^O" role^O="Master^O" timeout^O="20^O" \
        op^O monitor interval^O="31s^O" role^O="Slave^O" timeout^O="20^O" \
        op^O start interval^O="0^O" timeout^O="240^O" \
        op^O stop interval^O="0^O" timeout^O="100^O"
primitive^O ^Ovmdata_fs^O ocf:heartbeat:Filesystem \
        params^O device^O="/dev/drbd0^O" directory^O="/vmdata^O"
fstype^O="ext4^O" \
        meta^O target-role^O="Started^O" \
        op^O monitor interval^O="20^O" timeout^O="40^O" \
        op^O start timeout^O="30^O" interval^O="0^O" \
        op^O stop timeout^O="30^O" interval^O="0^O"
ms^O ^Odrbd_master_slave^O vmdata^O \
        meta^O master-max^O="1^O" master-node-max^O="1^O"
clone-max^O="2^O" clone-node-max^O="1^O" notify^O="true^O"
target-role^O="Started^O"
clone^O ^Ofencing^O st-null^O
location^O ^OPrimaryNode-libvirt^O libvirt^O 200^O: master
location^O ^OPrimaryNode-vmdata_fs^O vmdata_fs^O 200^O: master
location^O ^OSecondaryNode-libvirt^O libvirt^O 10^O: slave
location^O ^OSecondaryNode-vmdata_fs^O vmdata_fs^O 10^O: slave
colocation^O ^Olibvirt-with-fs^O inf^O: libvirt^O vmdata_fs^O
colocation^O ^Oservices_colo^O inf^O: vmdata_fs^O drbd_master_slave^O:Master
order^O ^Ofs_after_drbd^O inf^O: drbd_master_slave^O:promote
vmdata_fs^O:start libvirt^O:start
property^O $id="cib-bootstrap-options" \
        dc-version^O="1.1.10-42f2063^O" \
        cluster-infrastructure^O="corosync^O" \
        stonith-enabled^O="true^O" \
        no-quorum-policy^O="ignore^O" \
        last-lrm-refresh^O="1416390260^O"

hm

Am 11/14/14 um 14:00 schrieb emmanuel segura:
> you need to configure the fencing in pacemaker
>
> 2014-11-14 13:04 GMT+01:00 Heiner Meier <linuxforums at erwo.net>:
>> Hello,
>>
>> i now have configured fencing in drbd:
>>
>>         disk {
>>                 fencing resource-only;
>>         }
>>         handlers {
>>                 fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
>>                 after-resync-target "/usr/lib/drbd/crm-unfence-peer.sh";
>>         }
>>







More information about the Pacemaker mailing list