[Pacemaker] stonith - using multiple fencing devices for one node to fence device with redundant power sources

David Vossel dvossel at redhat.com
Thu Oct 3 16:22:27 UTC 2013


----- Original Message -----
> From: "Nikola Ciprich" <nikola.ciprich at linuxbox.cz>
> To: pacemaker at oss.clusterlabs.org
> Sent: Thursday, October 3, 2013 7:42:39 AM
> Subject: [Pacemaker] stonith - using multiple fencing devices for one node to fence device with redundant power
> sources
> 
> Hello,
> 
> I'm playing with netio 230-CS PDU, and it works pretty well as
> fencing device for my testing pacemaker cluster. However, I'd like
> to use two such units plugged to different power sources and
> use them as fencing units for servers with redundant power supplies
> (each connected to one of the PDUs).
> 
> Is there some way to tell, node needs to be fenced using two fencing
> devices? Or I'll need to create my own fencing plugin allowing to
> use two fencing devices simultaneously?

Not simultaneously (not sure if that is actually a requirement), but in serial this is possible.

Take a look at fencing levels.
http://clusterlabs.org/doc/en-US/Pacemaker/1.1-pcs/html-single/Pacemaker_Explained/index.html#_advanced_fencing_configurations

You'd want to set both of these devices at the same fencing level for whatever nodes they can fence. This will require stonith to use both devices before considering the node fenced.

Hope that helps,
-- Vossel


> 
> any help would be greatly appreciated
> 
> thanks a lot in advance
> 
> nik
> 
> 
> 
> 
> --
> -------------------------------------
> Ing. Nikola CIPRICH
> LinuxBox.cz, s.r.o.
> 28.rijna 168, 709 00 Ostrava
> 
> tel.:   +420 591 166 214
> fax:    +420 596 621 273
> mobil:  +420 777 093 799
> www.linuxbox.cz
> 
> mobil servis: +420 737 238 656
> email servis: servis at linuxbox.cz
> -------------------------------------
> 
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
> 




More information about the Pacemaker mailing list