[Pacemaker] route for ip resource missing

Dvorak Andreas Andreas.Dvorak at baaderbank.de
Thu Nov 14 14:54:00 UTC 2013


Dear all,

I have set up an ip resource with
pcs resource create ClusterIP ocf:heartbeat:IPaddr2 ip=10.40.70.38 cidr_netmask=32 nic=eth2 op monitor interval=30s
but the route for eth2 is missing. I am able to switch the resource to that other node an I can ping the ip.

eth2      Link encap:Ethernet  HWaddr 00:50:56:B6:5E:C9
          inet addr:10.40.70.38  Bcast:0.0.0.0  Mask:255.255.255.255
          inet6 addr: fe80::250:56ff:feb6:5ec9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4315751 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:290113098 (276.6 MiB)  TX bytes:972 (972.0 b)

netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
10.112.0.0      0.0.0.0         255.255.0.0     U         0 0          0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth1
10.15.0.0       0.0.0.0         255.255.0.0     U         0 0          0 eth1
0.0.0.0         10.15.200.1     0.0.0.0         UG        0 0          0 eth1

Red Hat Enterprise Linux Server release 6.4

Do I need to do something on the cluster configuration?

My cluster installation
Pacemaker 1.1.8
cman 3.0.12.1
pcs 0.9.26
ccs 0.16.2
resource-agents 3.9.2
corosync 1.4.1

Best regards
Andreas Dvorak
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20131114/5cb28470/attachment-0003.html>


More information about the Pacemaker mailing list