[Pacemaker] failure handling on a cloned resource

Andrew Beekhof andrew at beekhof.net
Thu May 9 21:59:01 EDT 2013 

On 07/05/2013, at 5:15 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:

> Hi,
> 
> I only keep a couple of pe-input file, and that pe-inpurt-1 version was already overwritten.
> I redid my tests as describe in my previous mails.
> 
> At the end of the test it was again written to pe-input1, which is included as attachment.

Perfect.
Basically the PE doesn't know how to correctly recognise that d_tomcat_monitor_15000 needs to be processed after d_tomcat_last_failure_0:

            <lrm_rsc_op id="d_tomcat_monitor_15000" operation_key="d_tomcat_monitor_15000" operation="monitor" crm-debug-origin="do_update_resource" crm_feature_set="3.0.7" transition-key="18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" transition-magic="0:0;18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" call-id="44" rc-code="0" op-status="0" interval="15000" last-rc-change="1367910303" exec-time="0" queue-time="0" op-digest="0c738dfc69f09a62b7ebf32344fddcf6"/>
            <lrm_rsc_op id="d_tomcat_last_failure_0" operation_key="d_tomcat_monitor_15000" operation="monitor" crm-debug-origin="do_update_resource" crm_feature_set="3.0.7" transition-key="18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" transition-magic="0:1;18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" call-id="44" rc-code="1" op-status="0" interval="15000" last-rc-change="1367909258" exec-time="0" queue-time="0" op-digest="0c738dfc69f09a62b7ebf32344fddcf6"/>

which would allow it to recognise that the resource is healthy one again.

I'll see what I can do...

> 
> gr.
> Johan
> 
> On 2013-05-07 04:08, Andrew Beekhof wrote:
>> I have a much clearer idea of the problem you're seeing now, thankyou.
>> 
>> Could you attach /var/lib/pacemaker/pengine/pe-input-1.bz2 from CSE-1 ?
>> 
>> On 03/05/2013, at 10:40 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:
>> 
>>> Hi,
>>> 
>>> Below you can see my setup and my test, this shows that my cloned resource with on-fail=block does not recover automatically.
>>> 
>>> My Setup:
>>> 
>>> # rpm -aq | grep -i pacemaker
>>> pacemaker-libs-1.1.9-1512.el6.i686
>>> pacemaker-cluster-libs-1.1.9-1512.el6.i686
>>> pacemaker-cli-1.1.9-1512.el6.i686
>>> pacemaker-1.1.9-1512.el6.i686
>>> 
>>> # crm configure show
>>> node CSE-1
>>> node CSE-2
>>> primitive d_tomcat ocf:ntc:tomcat \
>>>    op monitor interval="15s" timeout="510s" on-fail="block" \
>>>    op start interval="0" timeout="510s" \
>>>    params instance_name="NMS" monitor_use_ssl="no" monitor_urls="/cse/health" monitor_timeout="120" \
>>>    meta migration-threshold="1"
>>> primitive ip_11 ocf:heartbeat:IPaddr2 \
>>>    op monitor interval="10s" \
>>>    params broadcast="172.16.11.31" ip="172.16.11.31" nic="bond0.111" iflabel="ha" \
>>>    meta migration-threshold="1" failure-timeout="10"
>>> primitive ip_19 ocf:heartbeat:IPaddr2 \
>>>    op monitor interval="10s" \
>>>    params broadcast="172.18.19.31" ip="172.18.19.31" nic="bond0.119" iflabel="ha" \
>>>    meta migration-threshold="1" failure-timeout="10"
>>> group svc-cse ip_19 ip_11
>>> clone cl_tomcat d_tomcat
>>> colocation colo_tomcat inf: svc-cse cl_tomcat
>>> order order_tomcat inf: cl_tomcat svc-cse
>>> property $id="cib-bootstrap-options" \
>>>    dc-version="1.1.9-1512.el6-2a917dd" \
>>>    cluster-infrastructure="cman" \
>>>    pe-warn-series-max="9" \
>>>    no-quorum-policy="ignore" \
>>>    stonith-enabled="false" \
>>>    pe-input-series-max="9" \
>>>    pe-error-series-max="9" \
>>>    last-lrm-refresh="1367582088"
>>> 
>>> Currently only 1 node is available, CSE-1.
>>> 
>>> 
>>> This is how I am currently testing my setup:
>>> 
>>> => Starting point: Everything up and running
>>> 
>>> # crm resource status
>>> Resource Group: svc-cse
>>>     ip_19    (ocf::heartbeat:IPaddr2):    Started
>>>     ip_11    (ocf::heartbeat:IPaddr2):    Started
>>> Clone Set: cl_tomcat [d_tomcat]
>>>     Started: [ CSE-1 ]
>>>     Stopped: [ d_tomcat:1 ]
>>> 
>>> => Causing failure: Change system so tomcat is running but has a failure (in attachment step_2.log)
>>> 
>>> # crm resource status
>>> Resource Group: svc-cse
>>>     ip_19    (ocf::heartbeat:IPaddr2):    Stopped
>>>     ip_11    (ocf::heartbeat:IPaddr2):    Stopped
>>> Clone Set: cl_tomcat [d_tomcat]
>>>     d_tomcat:0    (ocf::ntc:tomcat):    Started (unmanaged) FAILED
>>>     Stopped: [ d_tomcat:1 ]
>>> 
>>> => Fixing failure: Revert system so tomcat is running without failure (in attachment step_3.log)
>>> 
>>> # crm resource status
>>> Resource Group: svc-cse
>>>     ip_19    (ocf::heartbeat:IPaddr2):    Stopped
>>>     ip_11    (ocf::heartbeat:IPaddr2):    Stopped
>>> Clone Set: cl_tomcat [d_tomcat]
>>>     d_tomcat:0    (ocf::ntc:tomcat):    Started (unmanaged) FAILED
>>>     Stopped: [ d_tomcat:1 ]
>>> 
>>> As you can see in the logs the OCF script doesn't return any failure. This is noticed by pacemaker,
>>> however it doesn't reflect in crm_mon and it doesn't start the depending resources.
>>> 
>>> Gr.
>>> Johan
>>> 
>>> On 2013-05-03 03:04, Andrew Beekhof wrote:
>>>> On 02/05/2013, at 5:45 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:
>>>> 
>>>>> On 2013-05-01 05:48, Andrew Beekhof wrote:
>>>>>> On 17/04/2013, at 9:54 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:
>>>>>> 
>>>>>>> Hi All,
>>>>>>> 
>>>>>>> I'm trying to setup a specific configuration in our cluster, however I'm struggling with my configuration.
>>>>>>> 
>>>>>>> This is what I'm trying to achieve:
>>>>>>> On both nodes of the cluster a daemon must be running (tomcat).
>>>>>>> Some failover addresses are configured and must be running on the node with a correctly running tomcat.
>>>>>>> 
>>>>>>> I have this achieved with a cloned tomcat resource and an collocation between the cloned tomcat and the failover addresses.
>>>>>>> When I cause a failure in the tomcat on the node running the failover addresses, the failover addresses will failover to the other node as expected.
>>>>>>> crm_mon shows that this tomcat has a failure.
>>>>>>> When I configure the tomcat resource with failure-timeout=0, the failure alarm in crm_mon isn't cleared whenever the tomcat failure is fixed.
>>>>>> All sounds right so far.
>>>>> If my broken tomcat is automatically fixed, I expect this to be noticed by pacemaker and that that node will be able to run my failover addresses,
>>>>> however I don't see this happening.
>>>> This is very hard to discuss without seeing logs.
>>>> 
>>>> So you created a tomcat error, waited for pacemaker to notice, fixed the error and observed the pacemaker did not re-notice?
>>>> How long did you wait? More than the 15s repeat interval I assume?  Did at least the resource agent notice?
>>>> 
>>>>>>> When I configure the tomcat resource with failure-timeout=30, the failure alarm in crm_mon is cleared after 30seconds however the tomcat is still having a failure.
>>>>>> Can you define "still having a failure"?
>>>>>> You mean it still shows up in crm_mon?
>>>>>> Have you read this link?
>>>>>>    http://clusterlabs.org/doc/en-US/Pacemaker/1.1-crmsh/html/Pacemaker_Explained/s-rules-recheck.html
>>>>> "Still having a failure" means that the tomcat is still broken and my OCF script reports it as a failure.
>>>>>>> What I expect is that pacemaker reports the failure as the failure exists and as long as it exists and that pacemaker reports that everything is ok once everything is back ok.
>>>>>>> 
>>>>>>> Do I do something wrong with my configuration?
>>>>>>> Or how can I achieve my wanted setup?
>>>>>>> 
>>>>>>> Here is my configuration:
>>>>>>> 
>>>>>>> node CSE-1
>>>>>>> node CSE-2
>>>>>>> primitive d_tomcat ocf:custom:tomcat \
>>>>>>>    op monitor interval="15s" timeout="510s" on-fail="block" \
>>>>>>>    op start interval="0" timeout="510s" \
>>>>>>>    params instance_name="NMS" monitor_use_ssl="no" monitor_urls="/cse/health" monitor_timeout="120" \
>>>>>>>    meta migration-threshold="1" failure-timeout="0"
>>>>>>> primitive ip_1 ocf:heartbeat:IPaddr2 \
>>>>>>>    op monitor interval="10s" \
>>>>>>>    params nic="bond0" broadcast="10.1.1.1" iflabel="ha" ip="10.1.1.1"
>>>>>>> primitive ip_2 ocf:heartbeat:IPaddr2 \
>>>>>>>    op monitor interval="10s" \
>>>>>>>    params nic="bond0" broadcast="10.1.1.2" iflabel="ha" ip="10.1.1.2"
>>>>>>> group svc-cse ip_1 ip_2
>>>>>>> clone cl_tomcat d_tomcat
>>>>>>> colocation colo_tomcat inf: svc-cse cl_tomcat
>>>>>>> order order_tomcat inf: cl_tomcat svc-cse
>>>>>>> property $id="cib-bootstrap-options" \
>>>>>>>    dc-version="1.1.8-7.el6-394e906" \
>>>>>>>    cluster-infrastructure="cman" \
>>>>>>>    no-quorum-policy="ignore" \
>>>>>>>    stonith-enabled="false"
>>>>>>> 
>>>>>>> Thanks!
>>>>>>> 
>>>>>>> Greetings,
>>>>>>> Johan Huysmans
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>>> 
>>>>>>> Project Home: http://www.clusterlabs.org
>>>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>>>> Bugs: http://bugs.clusterlabs.org
>>>>>> _______________________________________________
>>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>> 
>>>>>> Project Home: http://www.clusterlabs.org
>>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>>> Bugs: http://bugs.clusterlabs.org
>>>>> _______________________________________________
>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>> 
>>>>> Project Home: http://www.clusterlabs.org
>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>> Bugs: http://bugs.clusterlabs.org
>>>> _______________________________________________
>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>> 
>>>> Project Home: http://www.clusterlabs.org
>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>> Bugs: http://bugs.clusterlabs.org
>>> <step_2.log><step_3.log>_______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>> 
>>> Project Home: http://www.clusterlabs.org
>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>> 
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>> 
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
> 
> <pe-input-1.bz2>_______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org

More information about the Pacemaker mailing list