[Pacemaker] DRBD+LVM+NFS problems

Dennis Jacobfeuerborn dennisml at conversis.de
Tue Mar 26 01:23:15 UTC 2013


I have now reduced the configuration further and removed LVM from the 
picture. Still the cluster fails when I set the master node to standby.
What's interesting is that things get fixed when I issue a simple 
"cleanup" for the filesystem resource.

This is what my current config looks like:

node nfs1 \
	attributes standby="off"
node nfs2
primitive p_drbd_web1 ocf:linbit:drbd \
	params drbd_resource="web1" \
	op monitor interval="15" role="Master" \
	op monitor interval="30" role="Slave"
primitive p_fs_web1 ocf:heartbeat:Filesystem \
	params device="/dev/drbd0" \
	directory="/srv/nfs/web1" fstype="ext4" \
	op monitor interval="10s"
ms ms_drbd_web1 p_drbd_web1 \
	meta master-max="1" master-node-max="1" \
	clone-max="2" clone-node-max="1" notify="true"
colocation c_web1_on_drbd inf: ms_drbd_web1:Master p_fs_web1
order o_drbd_before_web1 inf: ms_drbd_web1:promote p_fs_web1
property $id="cib-bootstrap-options" \
	dc-version="1.1.8-7.el6-394e906" \
	cluster-infrastructure="classic openais (with plugin)" \
	expected-quorum-votes="2" \
	stonith-enabled="false" \
	no-quorum-policy="ignore" \
	last-lrm-refresh="1364259713" \
	maintenance-mode="false"
rsc_defaults $id="rsc-options" \
	resource-stickiness="100"

I cannot figure out what is wrong with this configuration.

Regards,
   Dennis

On 25.03.2013 13:09, Dennis Jacobfeuerborn wrote:
> I just found the following in the dmesg output which might or might not
> add to understanding the problem:
>
> device-mapper: table: 253:2: linear: dm-linear: Device lookup failed
> device-mapper: ioctl: error adding target to table
>
> Regards,
>    Dennis
>
> On 25.03.2013 13:04, Dennis Jacobfeuerborn wrote:
>> Hi,
>> I'm currently trying create a two node redundant NFS setup on CentOS 6.4
>> using pacemaker and crmsh.
>>
>> I use this Document as a starting poing:
>> https://www.suse.com/documentation/sle_ha/singlehtml/book_sleha_techguides/book_sleha_techguides.html
>>
>>
>>
>> The first issue is that using these instructions I get the cluster up
>> and running but the moment I try to stop the pacemaker service on the
>> current master node several resources just fail and everything goes
>> pear-shaped.
>>
>> Since the problem seems to relate to the nfs bits in the configuration I
>> removed these in order to get to a minimal working setup and then add
>> things piece by piece in order to find the source of the problem.
>>
>> Now I am at a point where I basically have only
>> DRBD+LVM+Filesystems+IPAddr2 configured and now LVM seems to act up.
>>
>> I can start the cluster and everything is fine but the moment I stop
>> pacemaker on the master i end up with this as a status:
>>
>> ===
>> Node nfs2: standby
>> Online: [ nfs1 ]
>>
>>   Master/Slave Set: ms_drbd_nfs [p_drbd_nfs]
>>       Masters: [ nfs1 ]
>>       Stopped: [ p_drbd_nfs:1 ]
>>
>> Failed actions:
>>      p_lvm_nfs_start_0 (node=nfs1, call=505, rc=1, status=complete):
>> unknown error
>> ===
>>
>> and in the log on nfs1 I see:
>> LVM(p_lvm_nfs)[7515]:    2013/03/25_12:34:21 ERROR: device-mapper:
>> reload ioctl on failed: Invalid argument device-mapper: reload ioctl on
>> failed: Invalid argument 2 logical volume(s) in volume group "nfs" now
>> active
>>
>> However a lvs in this state shows:
>> [root at nfs1 ~]# lvs
>>    LV      VG            Attr      LSize   Pool Origin Data%  Move Log
>>    web1    nfs           -wi------   2,00g
>>    web2    nfs           -wi------   2,00g
>>    lv_root vg_nfs1.local -wi-ao---   2,45g
>>    lv_swap vg_nfs1.local -wi-ao--- 256,00m
>>
>> So the volume group is present.
>>
>> My current configuration looks like this:
>>
>> node nfs1 \
>>          attributes standby="off"
>> node nfs2 \
>>          attributes standby="on"
>> primitive p_drbd_nfs ocf:linbit:drbd \
>>          params drbd_resource="nfs" \
>>          op monitor interval="15" role="Master" \
>>          op monitor interval="30" role="Slave"
>> primitive p_fs_web1 ocf:heartbeat:Filesystem \
>>          params device="/dev/nfs/web1" \
>>        directory="/srv/nfs/web1" \
>>        fstype="ext4" \
>>          op monitor interval="10s"
>> primitive p_fs_web2 ocf:heartbeat:Filesystem \
>>          params device="/dev/nfs/web2" \
>>        directory="/srv/nfs/web2" \
>>        fstype="ext4" \
>>          op monitor interval="10s"
>> primitive p_ip_nfs ocf:heartbeat:IPaddr2 \
>>          params ip="10.99.0.142" cidr_netmask="24" \
>>          op monitor interval="30s"
>> primitive p_lvm_nfs ocf:heartbeat:LVM \
>>          params volgrpname="nfs" \
>>          op monitor interval="30s"
>> group g_nfs p_lvm_nfs p_fs_web1 p_fs_web2 p_ip_nfs
>> ms ms_drbd_nfs p_drbd_nfs \
>>          meta master-max="1" \
>>        master-node-max="1" \
>>        clone-max="2" \
>>        clone-node-max="1" \
>>        notify="true"
>> colocation c_nfs_on_drbd inf: g_nfs ms_drbd_nfs:Master
>> property $id="cib-bootstrap-options" \
>>          dc-version="1.1.8-7.el6-394e906" \
>>          cluster-infrastructure="classic openais (with plugin)" \
>>          expected-quorum-votes="2" \
>>          stonith-enabled="false" \
>>          no-quorum-policy="ignore" \
>>          last-lrm-refresh="1364212090" \
>>          maintenance-mode="false"
>> rsc_defaults $id="rsc_defaults-options" \
>>          resource-stickiness="100"
>>
>> Any ideas why this isn't working?
>>
>> Regards,
>>    Dennis
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org





More information about the Pacemaker mailing list