[Pacemaker] Ubuntu 12.04.2 IP-cluster problem

Longina Przybyszewska longina at sdu.dk
Wed Jun 19 15:15:43 UTC 2013


Hi ,

I can not make  ‘ mount’ command on active node using   IP-cluster 
addresse  - mount  still uses  real IP addresse the node got at 
installation .

That breaks the access to external NFS storage from the active node.


All resources (drbd/fs/Ip-cluster/lsb-script) start successfully, the node 
gets Ip alias eth0:ha with IP-cluster addresse.

I can use  IP-cluster from external systems (ssh, accessing web), but if I 
would mount filesystem  exported to IP-cluster addresse, I get permission 
denied, because ‘mount’ presents itself with the old IP.



I am really stack on that problem.



It seems that the kernel flush-route  has no effect on ‘mount’ 
command.

Any ideas, how to fix it?



Sysctl –a | grep error



error: permission denied on key 'net.ipv4.route.flush'

net.ipv4.route.error_burst = 1250

net.ipv4.route.error_cost = 250

error: permission denied on key 'net.ipv6.route.flush'


sysctl -a | grep eth0| grep ipv4



error: permission denied on key 'net.ipv4.route.flush'
error: permission denied on key 'net.ipv6.route.flush'
net.ipv4.conf.eth0.accept_local = 0
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.accept_source_route = 1
net.ipv4.conf.eth0.arp_accept = 0
net.ipv4.conf.eth0.arp_announce = 0
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.arp_ignore = 0
net.ipv4.conf.eth0.arp_notify = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.disable_policy = 0
net.ipv4.conf.eth0.disable_xfrm = 0
net.ipv4.conf.eth0.force_igmp_version = 0
net.ipv4.conf.eth0.forwarding = 1
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.promote_secondaries = 1
net.ipv4.conf.eth0.proxy_arp = 0

net.ipv4.conf.eth0.proxy_arp_pvlan = 0

net.ipv4.conf.eth0.rp_filter = 1

net.ipv4.conf.eth0.secure_redirects = 1

net.ipv4.conf.eth0.send_redirects = 1

net.ipv4.conf.eth0.shared_media = 1

net.ipv4.conf.eth0.src_valid_mark = 0

net.ipv4.conf.eth0.tag = 0

net.ipv4.neigh.eth0.anycast_delay = 100

net.ipv4.neigh.eth0.app_solicit = 0

net.ipv4.neigh.eth0.base_reachable_time = 30

net.ipv4.neigh.eth0.base_reachable_time_ms = 30000

net.ipv4.neigh.eth0.delay_first_probe_time = 5

net.ipv4.neigh.eth0.gc_stale_time = 60

net.ipv4.neigh.eth0.locktime = 100

net.ipv4.neigh.eth0.mcast_solicit = 3

net.ipv4.neigh.eth0.proxy_delay = 80

net.ipv4.neigh.eth0.proxy_qlen = 64

net.ipv4.neigh.eth0.retrans_time = 100

net.ipv4.neigh.eth0.retrans_time_ms = 1000

net.ipv4.neigh.eth0.ucast_solicit = 3

net.ipv4.neigh.eth0.unres_qlen = 32

net.ipv4.neigh.eth0.unres_qlen_bytes = 65536

…

uname –a

Linux qrm1 3.5.0-34-generic #55~precise1-Ubuntu SMP Fri Jun 7 16:25:50 UTC 
2013 x86_64 GNU/Linux


best
longina

-- 
Longina Przybyszewska
IT-Service,
University of Southern Denmark,
Campusvej 55,
DK-5230 Odense M, Denmark
Phone Direct: +45 6550 2359
--


More information about the Pacemaker mailing list