[Pacemaker] RHEL 6.3 + fence_vmware_soap + esx 5.1

Andrew Beekhof andrew at beekhof.net
Mon Jul 15 01:05:48 UTC 2013


On 13/07/2013, at 10:05 PM, Mistina Michal <Michal.Mistina at virte.sk> wrote:

> Hi,
> Does somebody know how to set up fence_vmware_soap correctly so that it will start fencing vmware machine in the esx 5.1?
>  
> My problem is the fence_vmware_soap resource agent for stonith timed out. Don’t know why.

Nothing in the stonith-ng logs?

>  
> [root at pcmk1 ~]# crm_verify -L -V
> warning: unpack_rsc_op:        Processing failed op vm-fence-pcmk2_last_failure_0 on pcmk1: unknown exec error (-2)
> warning: unpack_rsc_op:        Processing failed op vm-fence-pcmk1_last_failure_0 on pcmk2: unknown exec error (-2)
> warning: common_apply_stickiness:      Forcing vm-fence-pcmk2 away from pcmk1 after 1000000 failures (max=1000000)
> warning: common_apply_stickiness:      Forcing vm-fence-pcmk1 away from pcmk2 after 1000000 failures (max=1000000)
>  
> I have 2 node cluster. If I tried to manually reboot vmware machine by calling fence_vmware_soap it worked.
> [root at pcmk1 ~]# fence_vmware_soap -a x.x.x.x -l administrator -p password -n "pcmk2" -o reboot –z
>  
> My settings are…
> [root at pcmk1 ~]# stonith_admin -M -a fence_vmware_soap
> <resource-agent name="fence_vmware_soap" shortdesc="Fence agent for VMWare over SOAP API">
>   <longdesc>fence_vmware_soap is an I/O Fencing agent which can be used with the virtual machines managed by VMWare products that have SOAP API v4.1+.
> .P
> Name of virtual machine (-n / port) has to be used in inventory path format (e.g. /datacenter/vm/Discovered virtual machine/myMachine). In the cases when name of yours VM is unique you can use it instead. Alternatively you can always use UUID (-U / uuid) to access virtual machine.</longdesc>
>   <vendor-url>http://www.vmware.com</vendor-url>
>   <parameters>
>     <parameter name="action" unique="0" required="1">
>       <getopt mixed="-o, --action=<action>"/>
>       <content type="string" default="reboot"/>
>       <shortdesc lang="en">Fencing Action</shortdesc>
>     </parameter>
>     <parameter name="ipaddr" unique="0" required="1">
>       <getopt mixed="-a, --ip=<ip>"/>
>       <content type="string"/>
>       <shortdesc lang="en">IP Address or Hostname</shortdesc>
>     </parameter>
>     <parameter name="login" unique="0" required="1">
>       <getopt mixed="-l, --username=<name>"/>
>       <content type="string"/>
>       <shortdesc lang="en">Login Name</shortdesc>
>     </parameter>
>     <parameter name="passwd" unique="0" required="0">
>       <getopt mixed="-p, --password=<password>"/>
>       <content type="string"/>
>       <shortdesc lang="en">Login password or passphrase</shortdesc>
>     </parameter>
>     <parameter name="passwd_script" unique="0" required="0">
>       <getopt mixed="-S, --password-script=<script>"/>
>       <content type="string"/>
>       <shortdesc lang="en">Script to retrieve password</shortdesc>
>     </parameter>
>     <parameter name="ssl" unique="0" required="0">
>       <getopt mixed="-z, --ssl"/>
>       <content type="boolean"/>
>       <shortdesc lang="en">SSL connection</shortdesc>
>     </parameter>
>     <parameter name="port" unique="0" required="0">
>       <getopt mixed="-n, --plug=<id>"/>
>       <content type="string"/>
>       <shortdesc lang="en">Physical plug number or name of virtual machine</shortdesc>
>     </parameter>
>     <parameter name="uuid" unique="0" required="0">
>       <getopt mixed="-U, --uuid"/>
>       <content type="string"/>
>       <shortdesc lang="en">The UUID of the virtual machine to fence.</shortdesc>
>     </parameter>
>     <parameter name="ipport" unique="0" required="0">
>       <getopt mixed="-u, --ipport=<port>"/>
>       <content type="string"/>
>       <shortdesc lang="en">TCP port to use for connection with device</shortdesc>
>     </parameter>
>     <parameter name="verbose" unique="0" required="0">
>       <getopt mixed="-v, --verbose"/>
>       <content type="boolean"/>
>       <shortdesc lang="en">Verbose mode</shortdesc>
>     </parameter>
>     <parameter name="debug" unique="0" required="0">
>       <getopt mixed="-D, --debug-file=<debugfile>"/>
>       <content type="string"/>
>       <shortdesc lang="en">Write debug information to given file</shortdesc>
>     </parameter>
>     <parameter name="version" unique="0" required="0">
>       <getopt mixed="-V, --version"/>
>       <content type="boolean"/>
>       <shortdesc lang="en">Display version information and exit</shortdesc>
>     </parameter>
>     <parameter name="help" unique="0" required="0">
>       <getopt mixed="-h, --help"/>
>       <content type="boolean"/>
>       <shortdesc lang="en">Display help and exit</shortdesc>
>     </parameter>
>     <parameter name="separator" unique="0" required="0">
>       <getopt mixed="-C, --separator=<char>"/>
>       <content type="string" default=","/>
>       <shortdesc lang="en">Separator for CSV created by operation list</shortdesc>
>     </parameter>
>     <parameter name="power_timeout" unique="0" required="0">
>       <getopt mixed="--power-timeout"/>
>       <content type="string" default="20"/>
>       <shortdesc lang="en">Test X seconds for status change after ON/OFF</shortdesc>
>     </parameter>
>     <parameter name="shell_timeout" unique="0" required="0">
>       <getopt mixed="--shell-timeout"/>
>       <content type="string" default="3"/>
>       <shortdesc lang="en">Wait X seconds for cmd prompt after issuing command</shortdesc>
>     </parameter>
>     <parameter name="login_timeout" unique="0" required="0">
>       <getopt mixed="--login-timeout"/>
>       <content type="string" default="5"/>
>       <shortdesc lang="en">Wait X seconds for cmd prompt after login</shortdesc>
>     </parameter>
>     <parameter name="power_wait" unique="0" required="0">
>       <getopt mixed="--power-wait"/>
>       <content type="string" default="0"/>
>       <shortdesc lang="en">Wait X seconds after issuing ON/OFF</shortdesc>
>     </parameter>
>     <parameter name="delay" unique="0" required="0">
>       <getopt mixed="--delay"/>
>       <content type="string" default="0"/>
>       <shortdesc lang="en">Wait X seconds before fencing is started</shortdesc>
>     </parameter>
>     <parameter name="retry_on" unique="0" required="0">
>       <getopt mixed="--retry-on"/>
>       <content type="string" default="1"/>
>       <shortdesc lang="en">Count of attempts to retry power on</shortdesc>
>     </parameter>
>   </parameters>
>   <actions>
>     <action name="on"/>
>     <action name="off"/>
>     <action name="reboot"/>
>     <action name="status"/>
>     <action name="list"/>
>     <action name="monitor"/>
>     <action name="metadata"/>
>     <action name="stop" timeout="20s"/>
>     <action name="start" timeout="20s"/>
>   </actions>
> </resource-agent>
>  
> [root at pcmk1 ~]# crm configure show
> node pcmk1
> node pcmk2
> primitive drbd_pg ocf:linbit:drbd \
>         params drbd_resource="postgres" \
>         op monitor interval="15" role="Master" \
>         op monitor interval="16" role="Slave" \
>         op start interval="0" timeout="240" \
>         op stop interval="0" timeout="120"
> primitive pg_fs ocf:heartbeat:Filesystem \
>         params device="/dev/vg_local-lv_pgsql/lv_pgsql" directory="/var/lib/pgsql/9.2/data" options="noatime,nodiratime" fstype="xfs" \
>         op start interval="0" timeout="60" \
>         op stop interval="0" timeout="120"
> primitive pg_lsb lsb:postgresql-9.2 \
>         op monitor interval="30" timeout="60" \
>         op start interval="0" timeout="60" \
>         op stop interval="0" timeout="60"
> primitive pg_lvm ocf:heartbeat:LVM \
>         params volgrpname="vg_local-lv_pgsql" \
>         op start interval="0" timeout="30" \
>         op stop interval="0" timeout="30"
> primitive pg_vip ocf:heartbeat:IPaddr2 \
>         params ip="x.x.x.x" iflabel="pcmkvip" \
>         op monitor interval="5"
> primitive vm-fence-pcmk1 stonith:fence_vmware_soap \
>         params ipaddr="x.x.x.x" login="administrator" passwd="password" port="pcmk1" ssl="1" retry_on="10" shell_timeout="20" login_timeout="15" action="reboot"
> primitive vm-fence-pcmk2 stonith:fence_vmware_soap \
>         params ipaddr="x.x.x.x" login="administrator" passwd="password" port="pcmk2" ssl="1" retry_on="10" shell_timeout="20" login_timeout="15" action="reboot"
> group PGServer pg_lvm pg_fs pg_lsb pg_vip
> ms ms_drbd_pg drbd_pg \
>         meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"
> location l-st-pcmk1 vm-fence-pcmk1 -inf: pcmk1
> location l-st-pcmk2 vm-fence-pcmk2 -inf: pcmk2
> location master-prefer-node1 pg_vip 50: pcmk1
> colocation col_pg_drbd inf: PGServer ms_drbd_pg:Master
> order ord_pg inf: ms_drbd_pg:promote PGServer:start
> property $id="cib-bootstrap-options" \
>         dc-version="1.1.7-6.el6-148fccfd5985c5590cc601123c6c16e966b85d14" \
>         cluster-infrastructure="openais" \
>         expected-quorum-votes="4" \
>         stonith-enabled="true" \
>         no-quorum-policy="ignore" \
>         maintenance-mode="false"
> rsc_defaults $id="rsc-options" \
>         resource-stickiness="100"
>  
> Am I doing something wrong?
>  
> Best regards,
> Michal Mistina
>  
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org





More information about the Pacemaker mailing list