[Pacemaker] No communication between nodes (setup problem)

and k not4mad at gmail.com
Wed Jan 30 13:09:46 UTC 2013


Hi,

It seem to be problem with network traffic.

Have you tried to sniff network traffic to be sure that udp traffic reaches
from one node to another ??

Try on server1:

tcpdump -i interface -p udp -s 192.168.100.112

on server2:

tcpdump -i interface -p udp -s 192.168.100.111


if there will be no packet traffic, that means you have some network issue.

BTW: Is SELinux enabled on nodes ??

--
Regards
Andrew



2013/1/30 Hans Bert <dadeda2002 at yahoo.de>

> Hello,
>
> we had to move from Fedora 16 to Fedora 18 and wanted to set up Corosync
> with Pacemaker and PCS as management tool.
> With F16 our cluster was running pretty good, but with F18 after 5 days we
> are reaching the point were we don't have
> got ideas what might be the problem(s).
>
>
> The cluster is build of two servers (server1=192.168.100.111;
> server2=192.168.100.112)
>
> Based on the Howto for F18 with pcs we created the following corosync.conf:
>
> totem {
>   version: 2
>   secauth: off
>   cluster_name: mcscluster
>   transport: udpu
> }
>
> nodelist {
>   node {
>     ring0_addr: 192.168.100.111
>   }
>   node {
>     ring0_addr: 192.168.100.112
>   }
> }
>
> quorum {
>   provider: corosync_votequorum
> }
>
> logging {
>   fileline: off
>   to_stderr: no
>   to_logfile: yes
>   to_syslog: yes
>   logfile: /var/log/cluster/corosync.log
>   debug: on
>   timestamp: on
> }
>
>
>
> After we started the server a status check shows us:
>
>
> [root at server1 corosync]#pcs status corosync
>
> Membership information
> ----------------------
>     Nodeid      Votes Name
> 1868867776          1 server1 (local)
>
> [root at server1 ~]# pcs status
> Last updated: Wed Jan 30 10:45:17 2013
> Last change: Wed Jan 30 10:18:56 2013 via cibadmin on server1
> Stack: corosync
> Current DC: server1 (1868867776) - partition WITHOUT quorum
> Version: 1.1.8-3.fc18-394e906
> 1 Nodes configured, unknown expected votes
> 0 Resources configured.
>
>
> Online: [ server1 ]
>
> Full list of resources:
>
>
>
> And on the other server:
>
>
> [root at server2 corosync]# pcs status corosync
>
> Membership information
> ----------------------
>     Nodeid      Votes Name
> 1885644992          1 server2 (local)
>
> [root at server2 corosync]# pcs status
> Last updated: Wed Jan 30 10:44:40 2013
> Last change: Wed Jan 30 10:19:36 2013 via cibadmin on server2
> Stack: corosync
> Current DC: server2 (1885644992) - partition WITHOUT quorum
> Version: 1.1.8-3.fc18-394e906
> 1 Nodes configured, unknown expected votes
> 0 Resources configured.
>
>
> Online: [ server2 ]
>
>
>
>
>
>
> The only warnings and errors in the logfile are:
>
> [root at server1 ~]# cat /var/log/cluster/corosync.log | egrep
> "warning|error"
> Jan 30 10:25:59 [1608] server1       crmd:  warning: do_log:    FSA: Input
> I_DC_TIMEOUT from crm_timer_popped() received in state S_PENDING
> Jan 30 10:25:59 [1607] server1    pengine:  warning: cluster_status:    We
> do not have quorum - fencing and resource management disabled
> Jan 30 10:28:25 [1525] server1 corosync debug   [QUORUM] getinfo response
> error: 1
> Jan 30 10:40:59 [1607] server1    pengine:  warning: cluster_status:    We
> do not have quorum - fencing and resource management disabled
>
>
> root at server2 corosync]# cat /var/log/cluster/corosync.log | egrep
> "warning|error"
> Jan 30 10:27:18 [1458] server2       crmd:  warning: do_log:    FSA: Input
> I_DC_TIMEOUT from crm_timer_popped() received in state S_PENDING
> Jan 30 10:27:18 [1457] server2    pengine:  warning: cluster_status:    We
> do not have quorum - fencing and resource management disabled
> Jan 30 10:29:19 [1349] server2 corosync debug   [QUORUM] getinfo response
> error: 1
> Jan 30 10:42:18 [1457] server2    pengine:  warning: cluster_status:    We
> do not have quorum - fencing and resource management disabled
> Jan 30 10:44:36 [1349] server2 corosync debug   [QUORUM] getinfo response
> error: 1
>
>
>
>
> We have installed the following packages:
>
> corosync-2.2.0-1.fc18.i686
> corosynclib-2.2.0-1.fc18.i686
> drbd-bash-completion-8.3.13-1.fc18.i686
> drbd-pacemaker-8.3.13-1.fc18.i686
> drbd-utils-8.3.13-1.fc18.i686
> pacemaker-1.1.8-3.fc18.i686
> pacemaker-cli-1.1.8-3.fc18.i686
> pacemaker-cluster-libs-1.1.8-3.fc18.i686
> pacemaker-libs-1.1.8-3.fc18.i686
> pcs-0.9.27-3.fc18.i686
>
>
>
> Firewalls are disabled, Pinging and SSH communication is working without
> any problems.
>
> With best regards
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20130130/833aaaa7/attachment.htm>


More information about the Pacemaker mailing list