[Pacemaker] cluster heartbeat is not used

emmanuel segura emi2fast at gmail.com
Mon Dec 9 15:06:27 UTC 2013


why you are editing corosync.conf, but as cluster stack, you are using cman?


2013/12/9 emmanuel segura <emi2fast at gmail.com>

> because in your corosync-cfgtool -s you are using bonding address
>
>
>
>
> 2013/12/9 Dvorak Andreas <Andreas.Dvorak at baaderbank.de>
>
>> Hi
>>
>>
>>
>> Here it is
>>
>> cat /proc/net/bonding/bond0
>>
>> Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
>>
>>
>>
>> Bonding Mode: fault-tolerance (active-backup)
>>
>> Primary Slave: None
>>
>> Currently Active Slave: em3
>>
>> MII Status: up
>>
>> MII Polling Interval (ms): 100
>>
>> Up Delay (ms): 0
>>
>> Down Delay (ms): 0
>>
>>
>>
>> Slave Interface: em3
>>
>> MII Status: up
>>
>> Speed: 1000 Mbps
>>
>> Duplex: full
>>
>> Link Failure Count: 0
>>
>> Permanent HW addr: c8:1f:66:d7:3b:fe
>>
>> Slave queue ID: 0
>>
>>
>>
>> Slave Interface: p3p3
>>
>> MII Status: up
>>
>> Speed: 1000 Mbps
>>
>> Duplex: full
>>
>> Link Failure Count: 0
>>
>> Permanent HW addr: 00:0a:f7:3e:ca:8e
>>
>> Slave queue ID: 0
>>
>>
>>
>> Andreas
>>
>>
>>
>> *Von:* emmanuel segura [mailto:emi2fast at gmail.com]
>> *Gesendet:* Montag, 9. Dezember 2013 15:50
>> *An:* The Pacemaker cluster resource manager
>> *Betreff:* Re: [Pacemaker] cluster heartbeat is not used
>>
>>
>>
>> show  cat /proc/net/bonding/bond0
>>
>>
>>
>> 2013/12/9 Dvorak Andreas <Andreas.Dvorak at baaderbank.de>
>>
>> Dear all,
>>
>>
>>
>> during failover tests I found out that I can put down the heartbeat
>> interfaces  and the cluster ignores that. But if I put down bond0 the
>> fencing is running.
>>
>> Can please somebody help me?
>>
>>
>>
>> bond0     Link encap:Ethernet  HWaddr C8:1F:66:D7:3B:FE
>>
>>           inet addr:10.15.28.36  Bcast:10.15.255.255  Mask:255.255.0.0
>>
>>           inet6 addr: fe80::ca1f:66ff:fed7:3bfe/64 Scope:Link
>>
>>           UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
>>
>>
>>
>> em4       Link encap:Ethernet  HWaddr C8:1F:66:D7:3B:FF
>>
>>           inet addr:192.168.2.36  Bcast:192.168.2.255  Mask:255.255.255.0
>>
>>           inet6 addr: fe80::ca1f:66ff:fed7:3bff/64 Scope:Link
>>
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>
>>
>>
>> p3p4      Link encap:Ethernet  HWaddr 00:0A:F7:3E:CA:8F
>>
>>           inet addr:192.168.3.36  Bcast:192.168.3.255  Mask:255.255.255.0
>>
>>           inet6 addr: fe80::20a:f7ff:fe3e:ca8f/64 Scope:Link
>>
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>
>>
>>
>> I have the following corosync.conf
>>
>> # Please read the corosync.conf.5 manual page
>>
>> compatibility: whitetank
>>
>> totem {
>>
>>                 version: 2
>>
>>                 secauth: off
>>
>>                 threads: 0
>>
>>                 interface {
>>
>>                                ringnumber: 0
>>
>>                                bindnetaddr: 192.168.2.0
>>
>>                                mcastaddr: 226.94.1.1
>>
>>                                mcastport: 5405
>>
>>                                ttl: 1
>>
>>                 }
>>
>>     interface {
>>
>>         ringnumber: 1
>>
>>         bindnetaddr: 192.168.3.0
>>
>>         mcastaddr: 226.94.1.2
>>
>>         mcastport: 5407
>>
>>         ttl: 1
>>
>>     }
>>
>> }
>>
>> logging {
>>
>>                 fileline: off
>>
>>                 to_stderr: no
>>
>>                 to_logfile: yes
>>
>>                 to_syslog: yes
>>
>>                 logfile: /var/log/cluster/corosync.log
>>
>>                 debug: off
>>
>>                 timestamp: on
>>
>>                 logger_subsys {
>>
>>                                subsys: AMF
>>
>>                                debug: off
>>
>>                 }
>>
>> }
>>
>> amf {
>>
>>                 mode: disabled
>>
>> }
>>
>>
>>
>> I have installed
>>
>>     cluster-glue-libs.1.0.5.x86_64.CentOS
>>
>>     corosynclib.1.4.1.x86_64.CentOS
>>
>>     openais.1.1.1.x86_64.CentOS
>>
>>     cman.3.0.12.1.x86_64.CentOS
>>
>>     pacemaker-libs.1.1.8.x86_64.CentOS
>>
>>     resource-agents.3.9.2.x86_64.CentOS
>>
>>     corosync.1.4.1.x86_64.CentOS
>>
>>     modcluster.0.16.2.x86_64.CentOS
>>
>>     openaislib.1.1.1.x86_64.CentOS
>>
>>     pacemaker-cluster-libs.1.1.8.x86_64.CentOS
>>
>>     pacemaker.1.1.8.x86_64.CentOS
>>
>>     pcs.0.9.26.noarch.CentOS
>>
>>     libqb.0.14.2.x86_64.CentOS
>>
>>     clusterlib.3.0.12.1.x86_64.CentOS
>>
>>     ricci.0.16.2.x86_64.CentOS
>>
>>     pacemaker-cli.1.1.8.x86_64.CentOS
>>
>>     fence-virt.0.2.3.x86_64.CentOS
>>
>>     ccs.0.16.2.x86_64.CentOS
>>
>>
>>
>> # corosync-cfgtool -s
>>
>> Printing ring status.
>>
>> Local node ID 1
>>
>> RING ID 0
>>
>>                 id            = 10.15.28.36
>>
>>                 status   = ring 0 active with no faults
>>
>> # pcs status corosync
>>
>> Nodeid     Name
>>
>>    1   sv2836.muc.baag
>>
>>    2   sv2837.muc.baag
>>
>>
>>
>> # crm_mon --one-shot -V
>>
>> Last updated: Mon Dec  9 14:56:32 2013
>>
>> Last change: Mon Dec  9 14:07:03 2013 via cibadmin on sv2836
>>
>> Stack: cman
>>
>> Current DC: sv2836 - partition with quorum
>>
>> Version: 1.1.10-1.el6_4.4-368c726
>>
>> 2 Nodes configured
>>
>> 4 Resources configured
>>
>>
>>
>> Online: [ sv2836 sv2837 ]
>>
>>
>>
>> ClusterIP            (ocf::heartbeat:IPaddr2):            Started sv2836
>>
>>  FIXRoute            (ocf::baader:FIXRoute):               Started sv2836
>>
>>  ipmi-fencing-sv2837    (stonith:fence_ipmilan):            Started
>> sv2836
>>
>>  ipmi-fencing-sv2836    (stonith:fence_ipmilan):            Started sv2837
>>
>>
>>
>> Best regards
>>
>> Andreas Dvorak
>>
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>>
>>
>>
>> --
>> esta es mi vida e me la vivo hasta que dios quiera
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>>
>
>
> --
> esta es mi vida e me la vivo hasta que dios quiera
>



-- 
esta es mi vida e me la vivo hasta que dios quiera
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20131209/7e1b46f0/attachment.htm>


More information about the Pacemaker mailing list