[Pacemaker] After update from 1.1.7 to 1.1.8 I get - pacemakerd: get_cluster_type Pacemaker does not support the 'heartbeat' cluster infra..

Jeff Johnson echo5juliet at gmail.com
Thu Nov 8 02:38:55 UTC 2012


Greetings,

I had a running corosync/pacemaker two node configuration doing simple
filesystem failover and stonith fencing. I decided to update to 1.1.8-4
after seeing some odd behavior and someone suggested a bug in 1.1.7-6 not
playing nice with corosync 1.4.1-7. After updating my cluster will not
initialize. The first node starts fine, corosync and pacemaker start via
init scripts and resources show in good status. Rings are in good status as
well. When I start corosync and pacemaker on the second node corosync
starts fine but pacemaker fails to start. /var/log/messages reads:

corosync[3344]:   [MAIN  ] Corosync Cluster Engine ('1.4.1'): started and
ready to provide service.
corosync[3344]:   [MAIN  ] Corosync built-in features: nss dbus rdma snmp
corosync[3344]:   [MAIN  ] Successfully read main configuration file
'/etc/corosync/corosync.conf'.
corosync[3344]:   [TOTEM ] Initializing transport (UDP/IP Multicast).
corosync[3344]:   [TOTEM ] Initializing transmit/receive security:
libtomcrypt SOBER128/SHA1HMAC (mode 0).
corosync[3344]:   [TOTEM ] The network interface [10.0.0.102] is now up.
corosync[3344]:   [SERV  ] Service engine loaded: corosync extended virtual
synchrony service
corosync[3344]:   [SERV  ] Service engine loaded: corosync configuration
service
corosync[3344]:   [SERV  ] Service engine loaded: corosync cluster closed
process group service v1.01
corosync[3344]:   [SERV  ] Service engine loaded: corosync cluster config
database access v1.01
corosync[3344]:   [SERV  ] Service engine loaded: corosync profile loading
service
corosync[3344]:   [SERV  ] Service engine loaded: corosync cluster quorum
service v0.1
corosync[3344]:   [MAIN  ] Compatibility mode set to whitetank.  Using V1
and V2 of the synchronization engine.
corosync[3344]:   [TOTEM ] A processor joined or left the membership and a
new membership was formed.
corosync[3344]:   [CPG   ] chosen downlist: sender r(0) ip(10.0.0.102) ;
members(old:0 left:0)
corosync[3344]:   [MAIN  ] Completed service synchronization, ready to
provide service.
corosync[3344]:   [TOTEM ] A processor joined or left the membership and a
new membership was formed.
corosync[3344]:   [CPG   ] chosen downlist: sender r(0) ip(10.0.0.101) ;
members(old:1 left:0)
corosync[3344]:   [MAIN  ] Completed service synchronization, ready to
provide service.
*pacemakerd[3364]:   notice: get_cluster_type: This installation of
Pacemaker does not support the 'heartbeat' cluster infrastructure.
 Terminating.*
cibadmin[3376]:   notice: crm_log_args: Invoked: cibadmin -l -Q
corosync[3344]:   [SERV  ] Unloading all Corosync service engines.

I have no heartbeat rpms installed on the nodes in the cluster. I don't
know why pacemaker is deciding the configuration is 'heartbeat' instead of
corosync.

I built the pacemaker rpms from the clusterlabs git tree. I used the same
combination of with/without options that 1.1.7-6 was compiled with. I
verified this by running a rpm rebuild on the pacemaker 1.1.7-6 source and
looked at the output to determine the with/without options.

I have checked networking between the nodes and the function of the
multicast address as well. 1.1.7-6 works, 1.1.8-4 does not.

OS/Software info:

RHEL6.2 x86_64
corosync 1.4.1-7
cluster-glue 1.0.5-6
clusterlib 3.0.12
libqb 0.14.2-1
pacemaker 1.1.8-4
openais 1.1.1-7

corosync.conf (if needed)

# Please read the corosync.conf.5 manual page
compatibility: whitetank

totem {
    version: 2
    secauth: off
    threads: 0
    interface {
        ringnumber: 0
        bindnetaddr: 10.0.0.0
        mcastaddr: 226.94.1.1
        mcastport: 5405
        ttl: 1
    }
}

logging {
    fileline: off
    to_stderr: no
    to_logfile: yes
    to_syslog: yes
    logfile: /var/log/cluster/corosync.log
    debug: off
    timestamp: on
    logger_subsys {
        subsys: AMF
        debug: off
    }
}

aisexec {
    user: root
    group: root
}

amf {
    mode: disabled
}


Any help or suggestions are greatly appreciated!

--Jeff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20121107/4dbc964e/attachment-0003.html>


More information about the Pacemaker mailing list