[Pacemaker] DRBD < LVM < EXT4 < NFS performance

Raoul Bhatia [IPAX] r.bhatia at ipax.at
Sun May 20 17:20:20 UTC 2012


On 2012-05-20 12:05, Christoph Bartoschek wrote:
> Hi,
>
> we have a two node setup with drbd below LVM and an Ext4 filesystem that is
> shared vi NFS. The system shows low performance and lots of timeouts
> resulting in unnecessary failovers from pacemaker.
>
> The connection between both nodes is capable of 1 GByte/s as shown by iperf.
> The network between the clients and the nodes is capable of 110 MByte/s. The
> RAID can be filled with 450 MByte/s.
>
> Thus I would expect to have a write performance of about 100 MByte/s. But dd
> gives me only 20 MByte/s.
>
> dd if=/dev/zero of=bigfile.10G bs=8192  count=1310720
> 1310720+0 records in
> 1310720+0 records out
> 10737418240 bytes (11 GB) copied, 498.26 s, 21.5 MB/s

to give you some numbers to compare:

I've got a small XFS file system, which i'm currently testing with.
Using a single thread and NFS4 only:

my configuration:
nfsserver:
# exportfs -v
/data/export 
192.168.100.0/24(rw,wdelay,no_root_squash,no_subtree_check,fsid=1000)


nfsclient mount
192.168.100.200:/data/export on /mnt type nfs 
(rw,nosuid,nodev,nodiratime,relatime,vers=4,addr=192.168.100.200,clientaddr=192.168.100.107)

via network (1gbit connection for both drbd sync and nfs)
   # dd if=/dev/zero of=bigfile.10G bs=6192  count=1310720
   1310720+0 records in
   1310720+0 records out
   8115978240 bytes (8.1 GB) copied, 140.279 s, 57.9 MB/s

on the same machine so that 1gbit is for drbd only:
   # dd if=/dev/zero of=bigfile.10G bs=6192  count=1310720
   1310720+0 records in
   1310720+0 records out
   8115978240 bytes (8.1 GB) copied, 70.9297 s, 114 MB/s

Maybe this numbers and configuration helps?

Cheers,
Raoul

> While the slow dd runs there are timeouts on the server resulting in a
> restart of some resources. In the logfile I also see:
>
> [329014.592452] INFO: task nfsd:2252 blocked for more than 120 seconds.
> [329014.592820] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
> this message.
> [329014.593273] nfsd            D 0000000000000007     0  2252      2
> 0x00000000
...
> Has anyone an idea what could cause such problems? I have no idea for
> further analysis.

i haven't seen such issue during my current tests.

> Is ext4 unsuitable for such a setup? Or is the linux nfs3 implementation
> broken? Are buffers too large such that one has too wait too long for a
> flush?

Maybe I'll have the time to switch form xfs to ext4 and retest
during the next couple of days. But I cannot guarantee anything.

Maybe you could try switching to XFS instead?

Cheers;
Raoul
-- 
____________________________________________________________________
DI (FH) Raoul Bhatia M.Sc.          email.          r.bhatia at ipax.at
Technischer Leiter

IPAX - Aloy Bhatia Hava OG          web.          http://www.ipax.at
Barawitzkagasse 10/2/2/11           email.            office at ipax.at
1190 Wien                           tel.               +43 1 3670030
FN 277995t HG Wien                  fax.            +43 1 3670030 15
____________________________________________________________________






More information about the Pacemaker mailing list