[Pacemaker] corosync vs. pacemaker 1.1

Andrew Beekhof andrew at beekhof.net
Mon Jan 30 03:00:30 UTC 2012


On Thu, Jan 26, 2012 at 2:08 AM, Kiss Bence <bence at noc.elte.hu> wrote:
> Hi,
>
> I am newbie to the clustering and I am trying to build a two node
> active/passive cluster based upon the documentation:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>
> My systems are Fedora 14, uptodate. After forming the cluster as wrote, I
> started to test it. (resources: drbd-> lvm-> fs ->group of services)
> Resources moved around, nodes rebooted and killed (first I tried it in
> virtual environment then also on real machines).
>
> After some events the two nodes ended up in a kind of state of split-brain.
> The crm_mon showed me that the other node is offline at both nodes although
> the drbd subsystem showed everything in sync and working. The network was
> not the issue (ping, tcp and udp communications were fine). Nothing changed
> from the network view.
>
> At first the rejoining took place quiet well, but some more events after it
> took longer and after more event it didn't. The network dump showed me the
> multicast packets still coming and going. At corosync (crm_node -l) the
> other node didn't appeared both on them. After trying configuring the cib
> logs was full of messages like "<the other node>: not in our membership".

That looks like a pacemaker bug.
Can you use crm_report to grab logs from about 30 minutes prior to the
first time you see this log until an hour after please?

Attach that to a bug in bugs.clusterlabs.org and i'll take a look

>
> I tried to erase the config (crm configure erase, cibadmin -E -f) but it
> worked only locally. I noticed that the pacemaker process didn't started up
> normally on the node that was booting after the other. I also tried to
> remove files from /var/lib/pengine/ and /var/lib/hearbeat/crm/ but only the
> resources are gone. It didn't help on forming a cluster without resources.
> The pacemaker process exited some 20 minutes after it started. Manual
> starting was the same.
>
> After digging into google for answers I found nothing helpful. From running
> tips I changed in the /etc/corosync/service.d/pcmk file the version to 1.1
> (this is the version of the pacemaker in this distro). I realized that the
> cluster processes were startup from corosync itself not by pacemaker. Which
> could be omitted. The cluster forming is stable after this change even after
> many many events.
>
> Now I reread the document mentioned above, and I wonder why it wrote the
> "Important notice" on page 37. What is wrong theoretically with my scenario?

Having corosync start the daemons worked well for some but not others,
thus it was unreliable.
The notice points out a major difference between the two operating
modes so that people will not be caught by surprise when pacemaker
does not start.

> Why does it working? Why didn't work the config suggested by the document?
>
> Tests were done firsth on virtual machines of a Fedora 14 (1 CPU core, 512Mb
> ram, 10G disk, 1G drbd on logical volume, physical  volume on drbd forming
> volgroup named cluster.)/node.
>
> Then on real machines. They have more cpu cores (4), more RAM (4G) and more
> disk (mirrored 750G), 180G drbd, and 100M garanteed routed link between the
> nodes 5 hops away.
>
> By the way how should one configure the corosync to work on multicast routed
> network? I had to create an openvpn tap link between the real nodes for
> working. The original config with public IP-s didn't worked. Is corosync
> equipped to cope with the multicast pim messages? Or it was a firewall
> issue.
>
> Thanks in advance,
> Bence
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org




More information about the Pacemaker mailing list