[Pacemaker] IP Range Failover with IPaddr2 and clone / globally-unique="true"

Jake Smith jsmith at argotec.com
Tue Jan 24 22:19:04 UTC 2012


----- Original Message -----
> From: "Anton Melser" <melser.anton at gmail.com>
> To: "The Pacemaker cluster resource manager" <pacemaker at oss.clusterlabs.org>
> Sent: Tuesday, January 24, 2012 3:40:23 PM
> Subject: Re: [Pacemaker] IP Range Failover with IPaddr2 and clone /	globally-unique="true"
> 
> On 24 January 2012 16:28, Dejan Muhamedagic <dejanmm at fastmail.fm>
> wrote:
> > On Mon, Jan 23, 2012 at 08:25:32PM +0000, Reid, Mike wrote:
> >> Dejan,
> >>
> >>
> >> Regarding the stability: In my two node cluster testing,
> >> unfortunately
> >> multiple times (on each node) when managing multiple IP Ranges via
> >> unique_clone_address, more than one of the IPs failed to create.
> >> The
> >> default monitor settings were still in effect, but the IP was
> >> never
> >> created until a manual "crm resource cleanup" was performed.
> >
> > What does "monitor setting" have to do with creating IP
> > addresses?
> >
> >> When compared
> >> to handling multiple IPs using individual IPaddr2 primitives, I've
> >> not had
> >> that issue.
> >
> > Well, I assume that can be fixed. Computers are good at
> > automating things, right? :) Do you see anything in the logs? Did
> > you try to use ocf_tester to see if it passes the test? If not,
> > you can post the messages it prints to the terminal.
> >
> >> Tuomo Soini (IPaddr2 Author) told me this morning: "you try to
> >> create
> >> multiple ip's with IPaddr2 ??? I had no idea it could do something
> >> like
> >> that, and I _did_ write IPaddr2. I'm quite sure what you try to do
> >> is not
> >> very well tested feature if possible."
> >
> > I think that the feature was implemented several years ago by
> > Andrew. Resource agents get extended from time to time and the
> > original authors are not always involved (unfortunately).
> >
> >> The "not very well tested" line implies to me that this feature is
> >> still
> >> "experimental", especially considering the multiple "FAILED" IP
> >> starts I
> >> was receiving. No worries, however, I am very happy with IPaddr2
> >> as a VIP
> >> solution, I was just hoping I could take advantage of the
> >> simplified
> >> configuration (much easier on the eyes) ;)
> >
> > Indeed, and that's important too.
> 
> Hey, this looks like *exactly* what I want to do - if anyone can give
> me an example to get started with I'm all up for being a guinea pig.
> I
> just can't seem to find examples of this, although that doesn't seem
> that unlikely given the comments here! I just can't see how this gets
> done from the docs...
> I would love to help testing this out (I have 3x /23 and a /25 I want
> to cluster, and there may be more later) and am prepared to help get
> this functionality production ready (I want it on production servers
> so it'd better be ready :-)).
> So please fire away with examples!
> Cheers
> A
> 

Let's try that again with something useful!

I'm not an expert on it but...

unique_clone_address:
If true, add the clone ID to the supplied value of ip to create a unique address to manage (optional, boolean, default false)

So for example:
primitive ClusterIP ocf:heartbeat:IPaddr2 \
    params ip="10.0.0.1" cidr_netmask="32" clusterip_hash="sourceip" \
    op monitor interval="30s"
clone CloneIP ClusterIP \
    meta globally-unique="true" clone-max="8"

would result in 8 ip's: 10.0.0.2, 10.0.0.3, etc.

HTH

Jake
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
> 
> 




More information about the Pacemaker mailing list