[Pacemaker] Cannot Create Primitive in CRM Shell

Andrew Martin amartin at xes-inc.com
Mon Jan 9 22:06:13 UTC 2012


Hi Jake, 


I applied the fix you posted, rebooted my system, and I am now able to create primitives from the crm shell! I have confirmed that the ppa version of libglib2.0-0 is the one that is installed (2.24.1-0ubuntu1.1~ppa1). 


I am not sure if it is a side-effect of this problem or not but shutting down the machines takes quite awhile - at least 5 minutes. During this time crmd prints a bunch of Pending (id: ...) statements for different resources in my pacemaker configuration. Eventually it times out and does restart, though it seems like this behavior could be improved. 


Thanks! 


Andrew 

----- Original Message -----

From: "Jake Smith" <jsmith at argotec.com> 
To: "The Pacemaker cluster resource manager" <pacemaker at oss.clusterlabs.org> 
Sent: Monday, January 9, 2012 3:03:14 PM 
Subject: Re: [Pacemaker] Cannot Create Primitive in CRM Shell 

Andrew - my solution below may have been a premature answer. It may have only applied to something on my system that wasn't right. 

First thing would be to check and see if you have the correct libglib2.0-0 version: 

2.24.1-0ubuntu1.1~ppa1 

If you do than disregard below. 

Jake 

----- Original Message ----- 
> From: "Jake Smith" <jsmith at argotec.com> 
> To: "The Pacemaker cluster resource manager" <pacemaker at oss.clusterlabs.org> 
> Sent: Monday, January 9, 2012 3:31:23 PM 
> Subject: Re: [Pacemaker] Cannot Create Primitive in CRM Shell 
> 
> ----- Original Message ----- 
> > From: "Rasto Levrinc" <rasto.levrinc at gmail.com> 
> > To: "The Pacemaker cluster resource manager" 
> > <pacemaker at oss.clusterlabs.org> 
> > Sent: Monday, January 9, 2012 2:12:54 PM 
> > Subject: Re: [Pacemaker] Cannot Create Primitive in CRM Shell 
> > 
> > On Mon, Jan 9, 2012 at 3:34 PM, Andrew Martin <amartin at xes-inc.com> 
> > wrote: 
> > > Hi Florian, 
> > > 
> > > Thanks for the quick response. This is a fresh install of 
> > > pacemaker/heartbeat on two VMs so it should not have any 
> > > previous/corrupted 
> > > configuration (Ubuntu 10.04 amd64). I had previously deployed 
> > > pacemaker on 
> > > alternative copies of these VM images, but both of those have 
> > > since 
> > > been 
> > > deleted. I am using the versions of these packages from the 
> > > Ubuntu 
> > > HA 
> > > PPA because the Lucid version does not appear to contain 
> > > ocf:heartbeat:exportfs. 
> 
> Andrew - I was having similiar problems and I believe I've fixed it 
> on mine and wouldn't be surprised if it was the same on yours. 
> 
> ***All the credit goes to Florian and the Hastexo group from pointing 
> me to the problem*** 
> 
> I use the ubuntu-ha-maintainers PPA also. There is an updated 
> version of libglib2.0-0 that (along with some fixes that are applied 
> to corosync? in the ppa) fixes the issue you and I were seeing with 
> adding primitives and ra info commands and even caused corosync to 
> hang on stop for mine. 
> Problem is that the libglib2.0-0 has an updated package in Lucid 
> updates which gives it priority over the version in the ppa. To 
> fix: 
> 
> (assuming you are using the ubuntu-ha-maintainers ppa) 
> 
> $vi /etc/apt/preferences.d/ubuntu-ha-maintainers-ppa-pin-995 
> and add: 
> 
> Package: * 
> Pin: release o=LP-PPA-ubuntu-ha-maintainers 
> Pin-Priority: 995 
> 
> Then apt-get upgrade. Then I restarted both nodes and all was well. 
> 
> HTH! 
> 
> Jake 
> 
> 
> _______________________________________________ 
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org 
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker 
> 
> Project Home: http://www.clusterlabs.org 
> Getting started: 
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf 
> Bugs: http://bugs.clusterlabs.org 
> 

_______________________________________________ 
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org 
http://oss.clusterlabs.org/mailman/listinfo/pacemaker 

Project Home: http://www.clusterlabs.org 
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf 
Bugs: http://bugs.clusterlabs.org 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20120109/36fd022b/attachment.htm>


More information about the Pacemaker mailing list