[Pacemaker] Strange failover behaviour
Andreas Kurz
andreas at hastexo.com
Tue Nov 29 23:12:13 UTC 2011
On 11/29/2011 07:14 PM, Hans Lammerts wrote:
> Hi there,
>
>
>
> I have something strange I would like the community to give it’s opinion
> on. I can’t figure out
>
> what is going wrong.
>
>
>
> I have a 2 node cluster (named cl1 and cl2). On this cluster I’m running
> MySQL, Apache, and
>
> Zarafa. Both clusters run CentOS 6.
>
> I have downloaded all latest sources for DRBD, Cluster Glue, Resource
> Agents, Heartbeat
>
> and Pacemaker and compiled them. Everything seems to be OK.
BTW ... no need to compile Pacemaker/Glue/Agents ... it is shipped with
CentOS 6 ... and use DRBD 8.4.0 only for test setups, there are some
known stability issues.
>
>
>
> I believe my Pacemaker setup to be OK, but I may be mistaken. Will
> attach the config below.
>
>
>
> What I experience when I do a failover from cl1 to cl2 is that MySQL and
> Zarafa failover without
>
> any problems, but httpd seems to be getting in a loop of starting and
> stopping.
>
> The error that is displayed is this :
>
>
>
> apache2_monitor_10000 (node=cl2, call=502, rc=7, status=complete): not
> running
>
the cluster and apache logs should give you good hints on the problem ...
>
>
> If I remember to set the failcount of the apache2 resource to 0, httpd
> will eventually start after
>
> quite a number of retries :
>
>
>
> [root at cl2 httpd]# crm resource failcount apache2 show cl2
>
> scope=status name=fail-count-apache2 value=69
>
>
>
> If I forget to reset the failcount (something you should not need to
> do), the failcount will reach
>
> infinity at some time in the future, and httpd won’t start. The number
> of times Pacemaker
>
> retries Is also different every time.
>
>
>
> Wait, it gets stranger…
>
> Putting cl1 online again, the fallback is initiated, and this goes
> without any problems. So, it looks
>
> like the problems reside only on the second cluster half. The hardware
> of cl2 is different from cl1, and
>
> it is the slower machine of the two.
>
> Yes, I made very sure every configuration file is the same on both nodes.
>
> And yes, I made sure the server-status section in httpd.conf is
> uncommented, as is the
>
> ExtendedStatus directive. Doing a wget -O -
> http://localhost/server-status?auto works
you are using the lsb script ... this does a simple pid check, at least
on the SL 6.1 test machines in my lab. Have you tried the ocf RA?
>
> perfectly.
>
>
>
> Can anyone please tell me what the problem could be here ?
Dig through your logs ... or hire someone to do it for you ;-)
Regards,
Andreas
--
Need help with Pacemaker?
http://www.hastexo.com/now
>
> Thanks.
>
>
>
> Versioninfo:
>
> CentOS 6.0
>
> DRBD 8.4.0
> Glue 1.0.8
>
> Resource agents 3.9.2
>
> Heartbeat 3.0.5
>
> Pacemaker 1.0.11
>
>
>
> Pacemaker config:
>
>
>
> node $id="62b94e0a-532f-4f99-acdb-57d6052a5635" cl1 \
>
> attributes standby="on"
>
> node $id="7444dfb4-2c9b-4130-83c4-c0cd3d7ec006" cl2 \
>
> attributes standby="off"
>
> primitive apache2 lsb:httpd \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120" \
>
> meta target-role="Started"
>
> primitive drbd_http ocf:linbit:drbd \
>
> params drbd_resource="http" \
>
> op start interval="0" timeout="240" \
>
> op stop interval="0" timeout="100" \
>
> op monitor interval="59s" role="Master" timeout="30s" \
>
> op monitor interval="60s" role="Slave" timeout="30s"
>
> primitive drbd_mysql ocf:linbit:drbd \
>
> params drbd_resource="mysql" \
>
> op start interval="0" timeout="240" \
>
> op stop interval="0" timeout="100" \
>
> op monitor interval="59s" role="Master" timeout="30s" \
>
> op monitor interval="60s" role="Slave" timeout="30s"
>
> primitive drbd_zarafa ocf:linbit:drbd \
>
> params drbd_resource="zarafa" \
>
> op start interval="0" timeout="240" \
>
> op stop interval="0" timeout="100" \
>
> op monitor interval="59s" role="Master" timeout="30s" \
>
> op monitor interval="60s" role="Slave" timeout="30s"
>
> primitive http_fs ocf:heartbeat:Filesystem \
>
> params device="/dev/drbd1" directory="/var/www/html"
> fstype="ext4" options="noatime" \
>
> op monitor interval="30s"
>
> primitive http_ip ocf:heartbeat:IPaddr2 \
>
> params ip="192.168.2.50" cidr_netmask="24" nic="eth0" \
>
> op monitor interval="30s"
>
> primitive mysql_fs ocf:heartbeat:Filesystem \
>
> params device="/dev/drbd0" directory="/var/lib/mysql"
> fstype="ext4" options="noatime" \
>
> op monitor interval="30s"
>
> primitive mysql_ip ocf:heartbeat:IPaddr2 \
>
> params ip="192.168.2.30" cidr_netmask="24" nic="eth0" \
>
> op monitor interval="30s"
>
> primitive mysqld lsb:mysqld \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa-dagent lsb:zarafa-dagent \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa-gateway lsb:zarafa-gateway \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa-ical lsb:zarafa-ical \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa-licensed lsb:zarafa-licensed \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa-monitor lsb:zarafa-monitor \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa-server lsb:zarafa-server \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa-spooler lsb:zarafa-spooler \
>
> op monitor interval="10" timeout="30" \
>
> op start interval="0" timeout="120" \
>
> op stop interval="0" timeout="120"
>
> primitive zarafa_fs ocf:heartbeat:Filesystem \
>
> params device="/dev/drbd2" directory="/var/lib/zarafa"
> fstype="ext4" options="noatime" \
>
> op monitor interval="30s"
>
> primitive zarafa_ip ocf:heartbeat:IPaddr2 \
>
> params ip="192.168.2.40" cidr_netmask="24" nic="eth0" \
>
> op monitor interval="30s"
>
> group HTTP http_fs http_ip apache2 \
>
> meta target-role="Started"
>
> group MYSQL mysql_fs mysql_ip mysqld \
>
> meta target-role="Started"
>
> group ZARAFA zarafa_fs zarafa_ip zarafa-server zarafa-spooler
> zarafa-dagent zarafa-licensed zarafa-monitor zarafa-gateway zarafa-ical \
>
> meta target-role="Started"
>
> ms ms_drbd_http drbd_http \
>
> meta master-max="1" master-node-max="1" clone-max="2"
> clone-node-max="1" notify="true"
>
> ms ms_drbd_mysql drbd_mysql \
>
> meta master-max="1" master-node-max="1" clone-max="2"
> clone-node-max="1" notify="true"
>
> ms ms_drbd_zarafa drbd_zarafa \
>
> meta master-max="1" master-node-max="1" clone-max="2"
> clone-node-max="1" notify="true"
>
> location cli-prefer-HTTP HTTP \
>
> rule $id="cli-prefer-rule-HTTP" inf: #uname eq cl1
>
> location cli-prefer-MYSQL MYSQL \
>
> rule $id="cli-prefer-rule-MYSQL" inf: #uname eq cl1
>
> location cli-prefer-ZARAFA ZARAFA \
>
> rule $id="cli-prefer-rule-ZARAFA" inf: #uname eq cl1
>
> colocation http_on_drbd inf: HTTP ms_drbd_http:Master
>
> colocation mysql_on_drbd inf: MYSQL ms_drbd_mysql:Master
>
> colocation zarafa_on_drbd inf: ZARAFA ms_drbd_zarafa:Master
>
> order http_after_drbd inf: ms_drbd_http:promote HTTP:start
>
> order mysql_after_drbd inf: ms_drbd_mysql:promote MYSQL:start
>
> order zarafa_after_drbd inf: ms_drbd_zarafa:promote ZARAFA:start
>
> order zarafa_after_mysql inf: MYSQL:start ZARAFA:start
>
> property $id="cib-bootstrap-options" \
>
> dc-version="1.0.11-9af47ddebcad19e35a61b2a20301dc038018e8e8" \
>
> cluster-infrastructure="Heartbeat" \
>
> stonith-enabled="false" \
>
> no-quorum-policy="ignore"
>
>
>
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 286 bytes
Desc: OpenPGP digital signature
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20111130/93e4560b/attachment-0004.sig>
More information about the Pacemaker
mailing list