[Pacemaker] Fw: Unable to start pacemaker due to WARN: do_cib_control: Couldn't complete CIB registration

Tue Nov 22 21:47:43 UTC 2011

On Wed, Nov 23, 2011 at 4:45 AM, Rv Rv <rvrv7575 at yahoo.com> wrote:
> Hello again,
> I was able to get the resource started. I noticed that despite executing the
> crm configure property stonith-enabled="false" and it returning no erros.
> stonith-enabled was not configured. So I edited it by hand.
> Now the resource is up but it is not failing over. I will investigate more.
> It seems that the guide Clusters from scratch is outdated since there does
> not seem to be a need to run pacemaker anymore. Is there any documentation
> that is upto date.

Yes, the document you were partially reading.
The old way is to have corosync start the pacemaker daemons.

If you read this carefully, you'll see we specify the new way "ver: 1".
  http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Clusters_from_Scratch/s-configure-corosync.html

Related reading:
  http://theclusterguy.clusterlabs.org/post/907043024/introducing-the-pacemaker-master-control-process-for

> Else I will write up something.
> Thanks for any inputs
> ----- Forwarded Message -----
> From: Rv Rv <rvrv7575 at yahoo.com>
> To: "pacemaker at oss.clusterlabs.org" <pacemaker at oss.clusterlabs.org>
> Sent: Tuesday, 22 November 2011 10:47 PM
> Subject: Fw: Unable to start pacemaker due to WARN: do_cib_control: Couldn't
> complete CIB registration
>
> Thanks for the response. I was trying corosync and pacemaker together though
> heartbeat was also installed. Since nothing was working, I created a fresh
> fedora install and reinstalled only corosync and pacemaker. I then followed
> the guide at http://www.clusterlabs.org/wiki/Install.
> This time corosync worked. Pacemaker did not. But it gave an error at
> "Nov 22 15:07:31 LVM-2 pacemakerd: [2543]: ERROR: read_config: We can only
> start Pacemaker from init if using version 1 of the Pacemaker plugin for
> Corosync.  Terminating".
> I could not find anything on this. THen I found the blog at
> http://blog.hongens.nl/guides/setting-up-a-pacemaker-cluster-on-centosrhel/.
> Thankfully just by starting corosync crm resource show stopped giving errors
> with cib.
> So instead of starting pacemaker, I continued with crm_mon.
> I executed the commands
> crm configure property stonith-enabled="false"
> crm configure property no-quorum-policy=ignore
> crm configure primitive failover-ip ocf:heartbeat:IPaddr params
> ip="10.123.254.213" op monitor interval="2s"
> as shown in the blog with the IPaddr changed.
>
> The commands got committed with no issue (except the stonith which is not to
> be bothered about right now).
> *I still see
> [root at LVM-1 corosync]# crm resource show
>  failover-ip (ocf::heartbeat:IPaddr) Stopped
> *
>
> How do I start the resource. From /var/log/messages, things seem to be ok.
> Config is
> root at LVM-1 corosync]# crm configure show
> node LVM-1 \
>  attributes standby="on"
> primitive failover-ip ocf:heartbeat:IPaddr \
>  params ip="10.11.19.81" \
>  op monitor interval="2s" \
>  meta target-role="Started"
> property $id="cib-bootstrap-options" \
>  dc-version="1.1.6-1.fc14-b379478e0a66af52708f56d0302f50b6f13322bd" \
>  cluster-infrastructure="openais" \
>  expected-quorum-votes="2" \
>  no-quorum-policy="ignore"
>
>
>
> I have corosync-1.4.2-1.fc14.x86_64, cluster-glue-1.0.6-1.fc14.x86_64
> , pacemaker-1.1.6-1.fc14.x86_64
> and heartbeat 3.0.0. installed on my Fedora machines.
>
> I am unable to run commands like
> crm resource show
> "Error signing on to the CIB service: connection failed"
> In /var/log/messages :
>  WARN: do_cib_control: Couldn't complete CIB registration 16 times... pause
> and retry
> Nov 22 15:15:43 waf1 crmd: [7765]: info: crm_timer_popped: Wait Timer
> (I_NULL) just popped (2000ms)
>
> Heartbeat standalone works fine. Corosync starts up fine. Pacemaker fails.
>
> Can someone please help resolve this issue?
> Thanks
>
>
> On Tue, Nov 22, 2011 at 1:27 PM, Rv Rv <rvrv7575 at yahoo.com> wrote:
>> I have corosync-1.4.2-1.fc14.x86_64, cluster-glue-1.0.6-1.fc14.x86_64
>> , pacemaker-1.1.6-1.fc14.x86_64
>> and heartbeat 3.0.0. installed on my Fedora machines.
>>
>> I am unable to run commands like
>> crm resource show
>> "Error signing on to the CIB service: connection failed"
>> In /var/log/messages :
>> ?WARN: do_cib_control: Couldn't complete CIB registration 16 times...
>> pause
>> and retry
>> Nov 22 15:15:43 waf1 crmd: [7765]: info: crm_timer_popped: Wait Timer
>> (I_NULL) just popped (2000ms)
>>
>> Heartbeat standalone works fine. Corosync starts up fine. Pacemaker fails.
>>
>> Can someone please help resolve this issue?
>
> Pacemaker is not compiled for Heartbeat in Fedora 16. You can use
> Corosync, you can rebuild the Pacemaker, you can choose other distro
> or I think you can get packages from some of the HA-companies.
> That's about all the options you have.
>
> Rasto
>
>
>
>
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>